X800Pro,, 16 pipelines

[OPPAINTER]

What do I use to check the # of pipes being used.

I did the mod and need to see if it's working

OPP

[Endre]

Cool. How do you do that mod?

You can use RivaTuner or ATiTool.

[TommyW]

i think ati tool for overclock and you need to flash the card...
i wish i get 400$

[Soulburner]

You could just run the 3DMark2001 Fillrate tests before/after as well. You will know if its working

[OPPAINTER]

There has to be somthing that shows it.
Other then the fonominal scores I'll be getting

OPP

[TommyW]

and you can check if where are 16pip or still 12pip with aida32...

[bachus_anonym]

ATI tool should definetely show it... at least those screens prove it...

[TommyW]

Originally posted by bachus_anonym
ATI tool should definetely show it... at least those screens prove it...

Please give me a link to ati tool...

thanks

[Endre]

Originally posted by TommyW
Please give me a link to ati tool...

thanks

You'll find it here.

[OPPAINTER]

Damn, It didn't work
I guess I'll try close the bridge again.

OPP

[pkrew]

Isn't there 2 bridges. If so, I wonder if it makes a difference which one or if you have to close both.

[k|ngp|n]

Bummer..... I figured you'd get it :P

[bachus_anonym]

double check the connection, OPP.... make it work, damn it

[OPPAINTER]

Originally posted by pkrew
Isn't there 2 bridges. If so, I wonder if it makes a difference which one or if you have to close both.

There are 2 bridges, only one is cut. I tryed closeing the one, maybe I didn't get contact.

OPP

[pkrew]

Its either that or the guy was jerking our chain. Could also be that it depends on who makes the card. I'm not sure why that would make a difference though.

[AcEmAsTr]

come on opp, give us something to dream of!

[Boyne7]

itd be soooo sweet if you could get that to work

[Arkangyl]

Give us non-ub3r rich folk some hope that the X800 Pro will kick (more) arse!!

Any news on the 6800 GT's BTW???

[TommyW]

The new gt version is faster then the uktra? or its in the between 6800 and the ultra?

[jan]

Its in between 6800 and Ultra

Ultra 400 Core 550 (1100) Mem
GT 350 Core 500 (1000) Mem

both have 16 pipes and gddr3

[LilGator]

Two successes:

Phemo - http://www.phemo.pwp.blueyonder.co.uk/xt3.jpg

3DMark2001SE Before - http://service.futuremark.com/compare?2k1=7844376

3DMark2001SE After - http://service.futuremark.com/compare?2k1=7864146

3DM03 Before = 10934

3DM03 After = http://service.futuremark.com/compare?2k3=2577914 12075

Chris_UK - http://www.andovernaturalproducts.co.uk/working.JPG

3DM03 Before = 11800

3DM03 After = http://www.andovernaturalproducts.co.uk/working1.JPG 13487 ( 630/585 )

[althes]

bad luck opp, try again

[LilGator]

Here is what Phemo tried:

" know the first thing you'll ask is how I did it. Well, I got a very sharp knife and scraped off my previous conductive paintwork, then I used the knife to scrape away at the two points - we are using the right points after all. I scraped them away until there was some bare copper exposed, bright copper instead of the usual dull, then re-did the paint job, booted Windows up and ran ATITool, she now apparently has 16 pipes"

[althes]

yeah it works, let the fun begin

[Boyne7]

IT WORKS?????!!!!!!!