Geil PC3500 4.5ns Platinium

[RoydRage]

Has anyone tried This?


http://www.ocsystem.com/oc51pc43ddrs.html




No doubt this is the fastest DDR memory available!

GeIL is leading the way toward superior performance DRAMs, representing the fastest and most advanced DRAMs available on the PC market today. Innovating on the existing solid position among the world's top DRAM suppliers, our customer base is expanding beyond the top businesses of performance computing and consumer PC's around the world.

GeIL PC3500 433MHz DDR is the first memory in the industry surpasses 400MHz DDR barrier!
Tin Coated Copper Heat Spreader
GeIL GL2000 4.5ns Chips
CL 2.5 6-3-3 2T Timings
CL 2 6-3-3 1T @ DDR400 PC3200
433(217)MHz
184 Pin Dimm
6 layer ultra low noise PCB
GeILmanufacturer direct, hand picked chips


Royd

[Bravo]

Garanteed commerically available DDR yes, fastest DDR to date, no. Until one of the regulars here, or a review shows up, Winbond 5ns Rev B holds the crown

Not that its much use being faster then 220mhz on an AMD system

[Entuscan]

I might want to inform you that the new Mushkin PC2700 Level 2 rated cl2 2-5-2 1T is even better than the Winbond 5ns in my AMD rig

[qwerty57]

what chips are mushkin using in there pc2700 ram? more than likly samsung CTL chips right?

[Entuscan]

Originally posted by qwerty57
what chips are mushkin using in there pc2700 ram? more than likly samsung CTL chips right?

I have absolutly no idea, I know their Level2 is brand spanking new. I have a stick it performs great (much better then their PC3200) And i don't want to screw it up by getting those heatspreaders of.

Mushkin makes its own PCB for shure, don't know about the chips.
Doubt that it's samsung.

Heck I don't care, But it beats a original Samsung stick with CTL chips I had. Wich was beaten by Winbond 5ns and now that Winbond gets it from the Mushkin. Not by much but it beats it

In the quest for optimal performance every mhz @Max. timings and settings makes a differance on an AMD rig

[TheDude]

And I just ordered a stick of xtreme corsair 3200 cas2

[qwerty57]

And I just ordered a stick of xtreme corsair 3200 cas2

I can vouch and say the pc3200c2 corsair rocks hitting 207mhz at 2,2,2,5,1 with enhanced and fast decode on my rig tho it needs 3.05v but it still rocks. But for me anything over 190mhz at fastest settings is a work of art :p ..

[Entuscan]

Corsair C2 did between Samsung and Winbond 5ns on my rig.

[Bravo]

Originally posted by qwerty57


I can vouch and say the pc3200c2 corsair rocks hitting 207mhz at 2,2,2,5,1 with enhanced and fast decode on my rig tho it needs 3.05v but it still rocks. But for me anything over 190mhz at fastest settings is a work of art :p ..

That sucks arse. Of the 4 TwinMOS sticks i had shipped to me, all did 215 aggressive settings @ 2.85v, and three of them did 220.

Entuscan, My CTL samsung did 2-4-2-5-2-1CMD rate-Fast CPU Decode up to 195mhz. What Mushkin has is nothing new.

[N8]

I take it twinmos is not available in the US?

[qwerty57]

215 at 2.85v at 2,2,2,5,1 4way 4q using fast decode and enhanced on the kx7-333 or at7?? Ok if ya say so you must get the best PC parts in the whole world

[Entuscan]

Originally posted by Sinnah

Entuscan, My CTL samsung did 2-4-2-5-2-1CMD rate-Fast CPU Decode up to 195mhz. What Mushkin has is nothing new.

Wel overhere Samsung did 198 with most agressive timings
The Mushkin does better at 202 In my Old KR7A with only a /4 divider

Samsung did 198, Corsair C2 did 200, Winbond 5ns 201 and Mushkin 202

But my board is getting maxed out with only a /4 divider

That PC2700 rated 222 from mushkin is deffintly new (about 2weeks out) But don't know about the chips on it, can't say due to heatspreader.

[TheDude]

Thanks guys,

Looks like the Corsair XMS3200cas2 I just ordered will be ok on my heavily modded Abit KX7 then. If I hit at least 200FSB with tight timings..I will be happy!

[Tom Holck]

I have tried Corsair cas2 v 2.1 for some time. It goes 226 cas 2.5/7/3/3 on my IT7 at 2.8 V

On AT7 it can go fastest settings over 200

You can take the alu of, an put some cobberheatsink with eproxy-silver on. Then it can go 228 cas 2.5/6/2/3 at 2.9V

Sometimes I bench, to follow OPP then It goes 230-232. But after 10-15 min it becomes unstable (to hot)

Corsair3200 v 2.1 don't like so high volt as the old Corsair3200 v 1.1

Best OC regards

Tom Holck
Denmark

[TheHunter]

OT... is the new WinBond 5ns are 0.13 micron?

[hipro5]

Hey guys...you really do belive that GEIL Memory can do this.....If you do believe it then go and buy it....
This is a 512Mb Corsair XMS3200 C2 at 253MHz(506MHz DDR) with Cas 2,5 - 2 - 3 -7 T2....

[terramir]

Ahh you guys seem to know alot, Just a question which memory will do 200 Mhz/ 400 FSB at cl 2.0-2-2 t1 and should I get 512 mb in one stick or 2X 256 mb for that FSB? Right now I'm going to buy it and stick it in my dragon + but for the future investment in a few weeks if the MB guys get off their a**es, xp 2600 at 2200 mhz @ 200/400mhz fsb with a nice little pci/6 divider just need a board where /6 works! Let me know ok
Thanks
terramir

[Entuscan]

Mushkin PC2700 level2 Rated 2-5-2 running @3.2V should do the trick. Corsair XMS3200 CL2 can do to

[terramir]

What about the geil 3500 Platinum?
It's rated 4.5 ns and pc 3500 with that I should be able to at least reach cl 2.0 -3-3 t1cmd. @ 200/400 fsb
These chips are rated 2.6 to 3V and right now before I upgrade to my new bed which won't be until these guys get off their butts with the /6 multiplier and a good kt 400 baord coming out, will this memory work at 2.48 V 133 to 150 Mhz CL 2.0-2-2 t1 on my soyo dragon plus? also One more question one 512 mb stick or two 256 mb sticks that is here the question(s).
Thanks
terramir

[hipro5]

Originally posted by terramir
Ahh you guys seem to know alot, Just a question which memory will do 200 Mhz/ 400 FSB at cl 2.0-2-2 t1 and should I get 512 mb in one stick or 2X 256 mb for that FSB? Right now I'm going to buy it and stick it in my dragon + but for the future investment in a few weeks if the MB guys get off their a**es, xp 2600 at 2200 mhz @ 200/400mhz fsb with a nice little pci/6 divider just need a board where /6 works! Let me know ok
Thanks
terramir

I think this one is good for you.....512Mb Corsair XMS3200 C2 at 227MHz(454MHz DDR) at Cas 2 - 2 - 2 - 7......

[Tom Holck]

Your tweaking of the corsair are great...

what volt do you rekommend.

have you special cooling on the ram?



Best OC regards

Tom Holck
Denmark

[hipro5]

Originally posted by Tom Holck
Your tweaking of the corsair are great...

what volt do you rekommend.

have you special cooling on the ram?



Best OC regards

Tom Holck
Denmark

The maximum Vmem can hold(I'm talking about Corsair XMS3200 C2 only),is about 3,4Vmem....I recoment the 3,2Vmem(after of caurse of a lot burn-in) to stabilize it and for falsefree working....
You can't give it more that 2.9Vmem or 2.8Vmem(depents on every Mobo) unlles you Mod your Mobo....
I do have special cooling of the ram cause I had almost 43C temp on the heatsinks of it.....

[qwerty57]

hipro I just noticed your sig states you run your memory at 250mhz i just want to bring to your attention about false advertisement. first a 2.8ghz AMD cpu now this... come on come clear tell the truth, lol.. J/K very,very nice does that mobo have the option to go to higher fsb or memory speeds with future modules??

[hipro5]

This Mobo I use , has fsb to chose till 400MHz......In fact had worked(to me) Max 227MHz......

[BTBJP]

lets get back to the subject, im very intersted in getting some of this Geil PC3500 4.5ns Platinium ram but does any one know what chips it uses and how good it is?