New mobile 2400+ came today...

[Stang_Man]

i got stepping:

AXMH2400FQQ4C
IQZFA 0348TPMW

[Theta]

Same chip here! Just got it in today.

Mid-level water yields me 2630 @ 1.95v on an NF7 v1.2.

I was really hoping for more, but who can complain for under $80?

[Stang_Man]

2585MHz stable @ 1.95V on an NF7 rev2...

temperature reaches 40C and it'll crash. with 2585, it'll get to 38C.

gotta bring the thing outside... hopefully will get better clocks

[afireinside]

Someones gona be happy

Nice chip there Newegg still got unlocked ones? What about zipzoomfly? Or did they never have them

[Techmasta]

Don't all mobile cpus have to be unlocked because of that technology that changes the cpu speed to save power?

[Stang_Man]

absolute max CPU....

[Stang_Man]

Originally posted by Techmasta
Don't all mobile cpus have to be unlocked because of that technology that changes the cpu speed to save power?

i dont know, i just know it's a sweet processor...

http://service.futuremark.com/compare?2k1=7542330

[Evil_Spork]

ok thats it.. im ordering another one.

[afireinside]

I'm ordering one with 2*256 PC3000 KHX as soon as I get home tommorow

You sure you dont want to keep that one stang?

[Stang_Man]

Originally posted by afireinside
I'm ordering one with 2*256 PC3000 KHX as soon as I get home tommorow

You sure you dont want to keep that one stang?

lol, i just ordered another one, so we see how that one does too. saaya said i could keep the higher overclocking one, so...

[Nohto]

What's the verdict on whether or not they are locked? I am running 2 1800's @ 2400 MHZ on my dually, but I wouldn't mind cranking it up another 100 or so Mhz. Where did you order them from?

[afireinside]

Newegg... Click all under mobile... Just leave me one or everyone dies

[Nohto]

What about them being unlocked? Also does anyone know about the mobile barton 2500's? Locked/unlocked Unlockable? Paint modable?

[JeffPH]

the 2400+ mobile has higher freq clock than the 2500+ ???? why is that?

[Drisler]

Originally posted by Nohto
What about them being unlocked? Also does anyone know about the mobile barton 2500's? Locked/unlocked Unlockable? Paint modable?

All mobiles are unlocked since they support PowerNow Tech.

Originally posted by JeffPH
the 2400+ mobile has higher freq clock than the 2500+ ???? why is that?

I'm pretty sure that's a NE
Newegg Error :p

[Stang_Man]

i dont even know what the stock speed and volts are on this thing...

so, i can't anwer thsoe questions

[Drisler]

Barton cored xp-m 2400+ is 1.8GHz, while 2500+ is around 1.9ish GHz
Note that the xp-m 2400+ comes in both Tbred and Barton flavors.

[Tedinde]

I just booted a mobile 2400xp @ 2500mhz 12.5X200 on a Cheap Biostar board. And a factory AMD heatsink. Its' running F@H stable??

The boards multi's wont go over 12.5, and fsb limited. I gotta crack open another board. I was just testing it for the hell of it on my desktop in a cheap customers rig im building. And 2 chips came in.

Im only giving the 1.7v too.

Be back when i see how high they go.

[Machiavelli]

Nice OC's! Aghh damn it, to good to pass up. I'm going in on this chip and a DFI infinity. I havent posted in a year and should have known better than to start reading the forums again.

[Sidebinder]

My DFI and 2400+ are on the way, supposed to be here on Thursday. I also picked up an SP-97 til kit-tronics ships my Prommy in March

[saaya]

WHOOOOOOOHHHHHHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOO



stang, what cooling and whats the max prime stable?
and is it completely unlocked?

[r3b0rN]

these mobile cpu's rock... some nice oc's, if i had the money id get a dfi infinity and mobile 2500+ right now.

[Theta]

The highest I've gotten so far was a shade under 2800 @ ~2.07v. I'll try to get some benching done, but I suspect I'll need a bit more voltage.

Heat seems to be a problem for me, even with water. I'm looking forward to my Maze4 due in here any day now.

Anybody think the Mobile 2500+ would get any higher than these 2400+'s?

My only concern is the amount of voltage needed for these clocks - it's getting quite high around here. Maybe the 2500+ would be able to attain 2800mhz with less voltage...

[JungleMan]

What about the lower end Mobile chips like the 2000 and 2200?

We all remember 1700 DLT3Cs and how they OCed just as high if not higher than 2100s, right? Maybe we will see a similar effect.

[Stang_Man]

Originally posted by saaya
WHOOOOOOOHHHHHHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOO



stang, what cooling and whats the max prime stable?
and is it completely unlocked?

max prime stable is with 2.03V, 2640MHz...

completely unlocked.