Here is a complete from start to finish -49C loaded cooler 135W
80 watt load @-55... By chilly1
now with mounting....
System is loaded in this pic with a pelt at about 65 watts
These temps are unloaded. I do this to see where the bottom is....lol
Here is a complete from start to finish -49C loaded cooler 135W
80 watt load @-55... By chilly1
now with mounting....
System is loaded in this pic with a pelt at about 65 watts
These temps are unloaded. I do this to see where the bottom is....lol
Last edited by chilly1; 02-02-2004 at 07:22 PM.
Looks great. Good job.
Agree with Techmasta, very nice.
Nice case too chilly1, that an Applique or what ever you call it for the Case painting. Or airbrush or something. on the xtreme??
Dont even ask where i've been!!!
How are you going to protect the mb from condensation?
baker18
Awesome paint job on the case
yea that is a very nice unit...
she is a thing of beauty
but chilly if you dont come up with a better insulated cover it will distroy a mother board very fast...condensation will get it.
i have done what you are trying to do.and it always gets the mother board
But on a good note there is a something new coming out in the next month that should solve that problem and set the forum on fire...a complete new evap and insulated cover and mounting system...but it will be a few weeks...
Last edited by bowman1964; 01-09-2004 at 10:34 AM.
WOW that is XTREMELEY nice work there I luuuuv the case!
-=Back In Business=-
Looks very nice. At first I wasent sure if the case was a case or a fancey boxHowed you do that?
And yea reinsulate the block. I'm gona wrap mine in pipewrap/armaflex whatever you call it so the case and main part gets insulated than you can wrap some more around and add some dielectric greese to get the edges and stuff once its mounted. Should work well. Than bring the suction line insulation all the way down to the holddown plexi.
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
Chilly, is that a rubber hose? Do you thrust them at these temperatures? Personally I don't.
Rated at -80 refrigeration hose.... If i go colder then I use stainless.
For insulation I use closed cell foam, seal string and gasketed block... looking forward to a better solution.
The "paint " is a vinyl laminate.
Is this one of your babies Bowman or have you got the scoop on something else? Don't leave us hanging like that man! We need time to hide a paycheck from the wife ya know!Originally posted by bowman1964
But on a good note there is a something new coming out in the next month that should solve that problem and set the forum on fire...a complete new evap and insulated cover and mounting system...but it will be a few weeks...
AHhhh yes....a true thing of beauty.....
and by this time next week it will be sitting here right next to me purring away.......
yes, im very impressed. again this is another one of those works that shows the pride, effort, and powerful minds that we here at XS have and put to use to make great things like this. aint it great being a nerd? lol
DFI ULTRA INFINITY
512 OCZ PLATINUM LE
AXDA2500 - Y - 0330
ANTEC 550 TC
Somewhere in Texas, There is a Village, Without Its Idiot.
well its not me,althou i am in contact with the master who desiged them...Originally posted by 2fast4u
Is this one of your babies Bowman or have you got the scoop on something else? Don't leave us hanging like that man! We need time to hide a paycheck from the wife ya know!
i cannt wait...
i should have a couple in the next week to test and show off for everyone...is all i can say....
and they are a complete setup..evap.insulation,and universal mounting system...looks better than the prom.
Till today the most impressive insulation i saw was yours and baker18's...
Im waiting ^^
the wait is almost over....Originally posted by berkut
Till today the most impressive insulation i saw was yours and baker18's...
Im waiting ^^
WOW! that thing looks nice!
This thing just needs to be placed, insulated with a bit Seal String and it should be protect your Board against condesation...
I hope its good @ cooling to
I hope this thing will be avaible in Ger too...
Nice job Chilly
so does that mean if we already have a baker block we wont be able to get the insulation and mounting system seperatly? as i already have the evap.Originally posted by bowman1964
well its not me,althou i am in contact with the master who desiged them...
i cannt wait...
i should have a couple in the next week to test and show off for everyone...is all i can say....
and they are a complete setup..evap.insulation,and universal mounting system...looks better than the prom.
I am quoting Baker here. If you cut the corners off the block it will fit the older version..
I am in hopes that they have a way of putting this over an assembled rig and not having to builtd with it in palace, we shall see.
really nice work chilly! is that the rig we've been talking about in pms a while back?
anyway..
bowman, that's a cool piece shown there.. just 2 quick questions about it.
a) what's the dimensions of the baseplate?
b) what material is that shell made of? looks like some kind of
metal or carbon fiber stuff, judging from the seam right above the baseplate. seems to be made with a 2-piece mold.
sky / s!p - we are oldskool, dammit.
Yes that is it sold it. customers account at paypal got hacked... now funds held pain in the patuse
chilly1:
very nice work, i like the paint jobTemp is also nice
but the evap isulation could be better...
My mounting block is made out of the same material as Chilly's. All I did was simply wrap a couple of layers of 1/4 neoprene around it and it works perfect.Originally posted by Sidewinder
chilly1:
very nice work, i like the paint job
but the evap isulation could be better...
I suppose you could hollow out the mounting block and fill it with foam and you would be set.
Great job Chilly!!! I hope you make many more.
Last edited by runmc; 01-12-2004 at 05:16 AM.
Posting Permissions
Reply With Quote
is the remedy
Bookmarks