266 MHz NF2 Dual Channel Done !!! 4100MB / Sec !!!

[OSKAR_WU]

After several BIOS modify and timing fine tuning , finally break 4100MB/sec barrier ...

Configuration :

Barton 3200+ @ 266 * 10 @ 2.0V
ChipSet Voltage @ 1.7V
Memory Voltage @ 3.3V
AGP Voltage @ 1.5V
ATI R9800 PRO @ default clock
A-DATA Winbond BH5 Single Side 256MB * 2
DRAM Timing and Driving :
11-2-2-2-2-9-12-Enable-Enable-Fast
Auto-Auto-Auto-Auto-Auto-Auto

Note : CPU is watercooled and an extra FAN for PWM airflaw is a must because there is no CPU FAN air flaw to the PWM when you using Liquid Cooling or Vapor Phase Change Cooling

Here is the picture ...



Just FYI ~~~

[Emericana]

GOOD LORD!

what motherboard is that... NF7?

what bios mods did you do and how did you do it?

how is that with only 1.7v VDD ?

[Iolao]

Wow! Great score!!!!
What bios modifies?

[enduracell]

This must be DFI Lan or infinity. Great job indeed

[OSKAR_WU]

Highest Sandrable Score , 3D Mark 2001 fail immediately ...



Ps : For user who use the same board as me , a beta bios will be available soon , besides breaking 260mhz limitation , the new beta bios also bring back the lost bandwidth when the FSB > 200 MHz and multiplier lower than 10X ...

[clockedOut]

OSKAR, Are you gonna have a NEW BETA bios???
NEWER then the one you did 260x10 with last week??

For Infinity and LP??

[LORD]

Originally posted by OSKAR_WU
After several BIOS modify and timing fine tuning , finally break 4100MB/sec barrier ...

Configuration :

Barton 3200+ @ 266 * 10 @ 2.0V
ChipSet Voltage @ 1.7V
Memory Voltage @ 3.3V
AGP Voltage @ 1.5V
ATI R9800 PRO @ default clock
A-DATA Winbond BH5 Single Side 256MB * 2
DRAM Timing and Driving :
11-2-2-2-2-9-12-Enable-Enable-Fast
Auto-Auto-Auto-Auto-Auto-Auto

Note : CPU is watercooled and an extra FAN for PWM airflaw is a must because there is no CPU FAN air flaw to the PWM when you using Liquid Cooling or Vapor Phase Change Cooling

Here is the picture ...

[IMG]<snip>[/IMG]

Just FYI ~~~

If that is bootable..... Very well done.

Can you say exactly which board this is?????

[texuspete00]

Most definitely should be DFI. Se the LP thread. Poster's name is on the beta bios links. So that also explains the q about 'bios modifies.'

Not only that but look at his listed memory timings. haven't seen a board with that many other than DFI for NF2's.

My inifinity will be here thursday. I also had an AN7 that I believe disliked my BH5's. So these results are two fold kicka$$ for me to see.

Oscar... are these the same beta bios being directed to by DFI? I didnt see your name mentioned on previous beta bios postings but now I been seeing it. Just wondering if you are at all affiliated or sponsored by DFI.

Great Job on everything. I'm hoping for the 230 range with crossed fingers.

edit: whoa lots of posts got in while I was writing mine. Old news and such....

[Evil_Spork]

its an infinity or lanparty. the 3.3vdimm is teh giveway.

its new beta bios is doing amazing things.

the question is wheather its a LP or finity.


yeah.. this would be a world record.. beating xDuck!!!


mine will be here friday.. cant wait. i just got new bh5 so now i got two sets to test....

[Walrusbonzo]

This must be the NF2 bandwidth record?

Nice results there!!! Me wants the DFI Infinity NFII Ultra so bad after having 2 POS Abit AN7s

[ricjax99]

Is this the board????????????????

DFI NFII ULTRA INFINITY Rev A

http://www.cpucitystore.co.uk/catalo...roducts_id=352



/me thinks about swapping NF7

[Evil_Spork]

this is both the fsb AND mem bandwidth record..

!!!!!!

[Walrusbonzo]

Stable 1:1 FSB yes

I've seen higher FSB clocks, just not 1:1 and/or stable.

[Walrusbonzo]

Originally posted by ricjax99
Is this the board????????????????

DFI NFII ULTRA INFINITY Rev A

http://www.cpucitystore.co.uk/catalo...roducts_id=352



/me thinks about swapping NF7

Yes, either that board or the Rev B Lan Party.

[ricjax99]

Originally posted by Walrusbonzo
Yes, either that board or the Rev B Lan Party.

Mint!!!!!!!!!!!

So is 3.3v vdimm bios selectable?? and whats the max vcore?

Thanks for replying

[Walrusbonzo]

VDimm upto 3.3v
VChipset upto 1.9v
VCore upto 2v

All BIOS selectable.

[ricjax99]

Originally posted by Walrusbonzo
VDimm upto 3.3v
VChipset upto 1.9v
VCore upto 2v

All BIOS selectable.

Dammit, i knew part of it would let me down , i need at least 2.06 to keep this CPU bench stable over 2.4 GHz

Gutted, was going give dave (the guy at the linked shop) see if i could do a swap and some money dammit.

Thanks for the reply tho matey

When they going to make a board thats vcore > 2.3v, vdimm > 3.4v and vdd > 2v. Surely its not that hard for them to figure that lol

[Walrusbonzo]

You ask too much.... Seriously though, I know what you mean, 2v ain't enough to run my 1700+ at 2.8GHz in my Prommie.

[clockedOut]

heh, heh, heh.... new bios and a UNlocked Barton... all in the same week.

Gotta get better NB & SB cooling.

[ricjax99]

Originally posted by clockedOut
heh, heh, heh.... new bios and a UNlocked Barton... all in the same week.

Gotta get better NB & SB cooling.

Nice

Y'know the digital sound connections on the DFI Infinity, are they optical or coaxial RCA plugs?

[clockedOut]

Originally posted by ricjax99
Nice

Y'know the digital sound connections on the DFI Infinity, are they optical or coaxial RCA plugs?

Ummmmm, The Infinity has sound??

Optical

[ricjax99]

Originally posted by clockedOut
Ummmmm, The Infinity has sound??

Optical

Mint, my home theatre system only has optial inputs, may have to see if i can give one of these babys a try

[Walrusbonzo]

You sure they are Optical? They looked Coaxial to me.

[clockedOut]

LOL, Maybe, I dont know.. ... I dont even have speakers plugged in...

Description from NewEgg
- 1 PS/2 mouse port
- 1 PS/2 keyboard port
- 1 DB-9 serial port
- 1 DB-25 parallel port
- 4 USB 2.0/1.1 ports
- 1 RJ45 LAN port
- 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
- 3 audio jacks: line-out, line-in and mic-in
- 2 audio jacks for center/bass and rear out

[Geforce4ti4200]

wow 266fsb is amazing! any idea what fsb the average nf7-s 2.0 does?