Abit It 7 max vcore and vio mod!

**Coolzero2k1** · 06-26-2002, 09:59 AM

I'm searching for these mods! Does anyone knows how to mod?

**OPPAINTER** · 06-29-2002, 11:06 AM

Use this one for the V-core.
Just pin 7.

The 6301 is up top left next to the socket.

http://www.xtremesystems.org/forums/...&threadid=1432

OPP

**OPPAINTER** · 06-30-2002, 03:59 PM

Here is where the chip is located.

**Coolzero2k1** · 06-30-2002, 09:05 PM

Ok thx opp!

**ctgilles** · 07-17-2002, 11:30 AM

Originally posted by OPPAINTER
Use this one for the V-core.
Just pin 7.

The 6301 is up top left next to the socket.

http://www.xtremesystems.org/forums/...&threadid=1432

OPP

is the pin10 obsolete?
Im going for veeeery high volts

**ctgilles** · 07-17-2002, 11:33 AM

btw, is the VMEM possible on me IT7 (as it controls AGP too, handy for OC'ing me GF

)

**OPPAINTER** · 07-17-2002, 01:22 PM

ctgilles,

The memory voltage goes to 3.2 on this mobo allready.

OPP

**ctgilles** · 07-17-2002, 01:33 PM

nope, i have the 8y bios (max 2.8)

anyone has the original one (/me is looking @ opp

)
cuz, it's handy to get the agp up and oc some more

**john433i** · 07-17-2002, 01:39 PM

Is this the one you are looking for?

ftp://202.168.194.114/pub/download/fae/IT78H.EXE

**ctgilles** · 07-17-2002, 01:40 PM

gonna try it

**Tom Holck** · 08-11-2002, 01:58 PM

Hi ctgilles

also some bios here:

http://www.n3dt.com/bios/main.html

OPP:

my IT7 only shows 2.99-3.02 when the volt in bios is set to 3.2 V
I agree with you this board need som good ram.
I can go to 225 Mhz 3431/3442 stabil with corsair 400 DDR v 1.1
a little more volt will help I think.

CO Regards

Tom Holck
Denmark

**Tom Holck** · 09-03-2002, 02:19 AM

Funny,

Just got the corsair 400c2 v 2.1
They kan go 232 Mhz but the volt need to bee 2.9 ?
at 3.0 its only 228, same at 2.8 V
I thange the alu-headspreder to cupper it gave 234 unstable.

The Mem are still the problem, going at 181 mhz (P4 2.533) 3/4 the ram have to do 242.

Best OC regards

Tom Holck
Denmark

**Chong345** · 09-04-2002, 02:02 PM

Any clues on how to get the 3.2V from this board? After 2.9 mine only shows 2.96-2.94 no matter what I set it too.

**Creative** · 09-04-2002, 07:53 PM

Same chong, mine only goes to 2.9 even when on 3.2

I think OP mentioned he couldnt find any vdimm mods for this board?

Im prob going to do the vcore cos my board undervolts to about 1.77 on load when at 1.85 in bios

**Chong345** · 09-08-2002, 02:36 AM

Well, I tweaked my PSU a little bit and I get a little higher voltage on the vdimm. I dunno though. Its now at 3V and won't go any higher no matter what.

**Creative** · 09-08-2002, 03:16 AM

What do you mean tweak bud?

I have a 430watt Antec TruPower here and dont know anything bout tweaking PSUs

hehehe

**Chong345** · 09-08-2002, 06:55 AM

I just upped my 5 and 12 and then the vdimm got better.

**Unshra** · 10-04-2002, 03:48 AM

Does anyone know if the BIOS will work for the IT7 MAXII?
Currently the IT7 II only allows for 2.8v, thought about vMod but if the BIOS works I might try that first.

**Hiwayman** · 10-07-2002, 12:40 PM

Does the NW pin mod work ok for the IT7 Max2, I'm assuming it will?

**mike.elmes** · 10-07-2002, 01:12 PM

The original 8H bios provides a 3.2 Vmem. It's available at Abit.

**DDTUNG** · 10-07-2002, 01:21 PM

Hardware limitations on the Vmem. JC and I worked on a Vmem mod, it works, but max Vmem is 3.04V. The controller IC is speced
up to 3.5V, so something else is limiting it. The MOSFET that drives Vmem feeds off of the 5V line, that's why Chong managed to squeeze out a little more.

DDTUNG

**Chong345** · 10-08-2002, 04:26 PM

Thats right. I max out right at 3.07-3.04. Oh well. thats still not bad.

Chong

**Tom Holck** · 10-27-2002, 03:00 AM

Originally posted by DDTUNG
Hardware limitations on the Vmem. JC and I worked on a Vmem mod, it works, but max Vmem is 3.04V. The controller IC is speced
up to 3.5V, so something else is limiting it. The MOSFET that drives Vmem feeds off of the 5V line, that's why Chong managed to squeeze out a little more.

DDTUNG

Hi Ddtung,

Is the MemVoltmod on IT7Max the pin3 on one of the 2 chip with 16 pins? in the corner...

Best OC regards

Tom Holck
Denmark

**Tom Holck** · 11-02-2002, 02:28 PM

We need your expertise, to get more mem-volt out of the Abit IT7Max.

The mem speed at low (3.04volt) is the limit

238 is limiting my FSB at 178. The P4 3Ghz come this month, and we are puching 4Ghz.

My Winbond 4.5 can go close to 250 at 3.3 volt

Best OC regards

Tom Holck
Denmark

The Homeland of Prometeia and Vapochill

**hipro5** · 11-10-2002, 08:03 AM

Look at my Vmem......with the ABIT IT7-Max2 Mobo I'm working now(for the time been).....

Thread: Abit It 7 max vcore and vio mod!

Thread Tools

Search Thread

Rate This Thread

Display

Abit It 7 max vcore and vio mod!

Location of the 6301 chip

Is it the same Vmem regulator as the KX7/AT7/KG7 ?

Where are you Ddtung??

Bookmarks

Bookmarks

Posting Permissions