Another milestone for my tiny cheap XP1700+ chip

[JCviggen]

2.01 volts, Prometeia cooled on an NF7 2.0

I think this must be one of the best clocks ever for a 1700 on phase change

I reckon on a KD7 board I could make at least 3150

[RichBa5tard]

Sweet. :o

3D mark stable above 3ghz?

Were did you get it from?

[JCviggen]

not 'above' mainly because I ran out of FSB. I'll run 3D at 3 GHz. That makes the FSB about 231 DC fastest timings. Now if only there wasnt a GF2 MX400 in my AGP slot

I got it in germany several weeks ago.

[jmke]

time to get a nForce3 so you can push the FSB higher

or let an expert cut some bridges on that XP

[JCviggen]

Originally posted by jmke
time to get a nForce3 so you can push the FSB higher

or let an expert cut some bridges on that XP

FSB is not an issue m8

I have personally modified the multiplier to 13x anyway and I can go as high as 22x now if I like

[bowman1964]

great clock my friend.

damm would be nice to see that.

personly i hope to see how far my barton will run on my nf7-s this weekend.i am still holding my own on the orb with my lonely 9700 as not but a few of us left in the top running a 9700,damm if i had the money.........

o well

still 3g on a tbred would walk all over my barton at 2.8g

[Raptor]

Great cpu JC... and great overclock, btw.

how about the stepping?

ps: Now you must update your signature!
ps2: if you lived here in portugal i would borrowed you a r9700pro for shure...

[GreenBeret]

Bah, no big deal, just 1GHz more than what I can get with my 1700+ B

Holy Jebus #@!$%@#$^@%^@$%^@$ ! I wish one day I would be that lucky :p

[Ragnarok]

holy %$*#&$(#)$(*#&$*(#$&

is it one of those super DLT3C chips?

[jmke]

hmm must have misread it then somewhere, saw this post also on another forum where you mentioned that unlocking the MP was not going to be a thing you would risk to do

how did you succeed in unlocking those higher MP's ?

[JCviggen]

Originally posted by jmke
hmm must have misread it then somewhere, saw this post also on another forum where you mentioned that unlocking the MP was not going to be a thing you would risk to do

how did you succeed in unlocking those higher MP's ?

yea but that was long ago

I simply burnt the 3rd and 5th L3 bridge with the 5V line of my PSU. I've done that to several chips now, it was successful every time and only takes 20 seconds.

Ragnarok : this chip is not so exceptional in some ways... with my SLK-800 it will boot at 2.5 GHz 2.0 Vcore but it will not be stable at all. I've had chips that go much higher than this one on air, but it flies in the prom.... aside from a 2100+ that just made 3006 MHz, this is the only XP chip ive ever gotten past 3 GHz.
cooling makes this chip ... well... fly. I'm only using between 2 and 2.05V on the core, the rest is in the cooling.

its a DLT3C JIUHB0308XPMW xxxxx280300

[Hardass]

Awesome is all I can say!

[will_perdikakis]

Excellent sir, superb.

I can no longer wait for my XPMW to come in the mail now!

Being broke sucks JC, I know how you feel. I had to save up for this 1700+ :p

[Xenogias]

don't worry JC, your time back at the top of the ORB is coming. I'm sure its just a matter of time. Hopefully you can give these canterwoods a run for their money with that little gem.

[hedge]

Give them a run for their money? More like kick them in the pants! That is a way nice overclock. Now just lower the multiplier and raise the fsb and you have one of the sweetest amd chips ever. Sheesh, over a 1.5 ghz overclock, wish I could do that.

hedge

[JCviggen]

Originally posted by hedge
Give them a run for their money? More like kick them in the pants! That is a way nice overclock. Now just lower the multiplier and raise the fsb and you have one of the sweetest amd chips ever. Sheesh, over a 1.5 ghz overclock, wish I could do that.

hedge

Well I just ran 15x because I was using rather warm water on the northbridge, it benches a bit higher in FSB

[bias_hjorth]

great OC m8..

got any sisoft scores or 3dmark etc.. Btw at what speed is the CPU benchable?

[JCviggen]

Originally posted by bias_hjorth
great OC m8..

got any sisoft scores or 3dmark etc.. Btw at what speed is the CPU benchable?

*tough* benches go at 3 GHz.

light benches at 3.04-3.05 GHz

no 3Dmark yet due to no decent gfx card

but I do have sandra somewhere...



http://users.pandora.be/JCviggen/CPU3040.JPG (doesnt show the speed but is same as the prev one)

[WxChaser]

JC - you are the Belgian Master.

Excellent clock, that poor chip is screaming for mercy by now!

[GVCryan]

So nice my friend So nice

[bias_hjorth]

wow I must say.. thats really Xtreme

Btw. I cant wait to see your 3dmark scores.. Especially 2001

[M@tt]

Sorry if you have said in other threads, but I was wondering if you have moded your Prometeia in anyway?

[Royal Oaks]

Why not make a run for the world's highest GF2MX score Seriously though why not just try a few loops to see which speed you can bench at then when you get a better card you won't need to waste as much time?? Not really trying to give you any hints or anything, I'm sure you know lot's more about 3DMARK than me, but I am just kinda curious how high you can go with that thing in 3DMARK....

[JCviggen]

Originally posted by M@tt
Sorry if you have said in other threads, but I was wondering if you have moded your Prometeia in anyway?

yes, its warranty is thoroughly voided and has gained me several degrees lower under load

Royal : the system hardly matters when you're benching a GF2, and this card sucks But i'll give 3D a run!

[Royal Oaks]

Push that sucka!!! haha, the highest I got my old GF2MX at was like 240/210 or so on air but it's been awhile so I can't remember. I'm just sayin why not, clock her till she blows