Specs:
Originally Posted by Sampsa
The more impressive part is:
Just amazing. Congrats to the masters, and we hope to see more
Now that the NDA on rd580 has lifted, top 5 has already been dominated by ATI.
(more info @ http://www.xtremesystems.org/forums/...40#post1308440)
My watercooling experience
Water
Scythe Gentle Typhoons 120mm 1850RPM
Thermochill PA120.3 Radiator
Enzotech Sapphire Rev.A CPU Block
Laing DDC 3.2
XSPC Dual Pump Reservoir
Primochill Pro LRT Red 1/2"
Bitspower fittings + water temp sensor
Rig
E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB
I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.
kinpin is on nvidia tho
well done macci and sampsa
I said dominated by ATI, I didn't say owned by ATI
My watercooling experience
Water
Scythe Gentle Typhoons 120mm 1850RPM
Thermochill PA120.3 Radiator
Enzotech Sapphire Rev.A CPU Block
Laing DDC 3.2
XSPC Dual Pump Reservoir
Primochill Pro LRT Red 1/2"
Bitspower fittings + water temp sensor
Rig
E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB
I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.
they are cleaning up
wonder how much longer knipin is gonna stay on Nv he did say he has some in reserve just incase he gets beaten
7900 should be out soon
...
i still dont think macci scores count as before, he now works for ati.
Still a great score
Yeah I doubt someone as trusted as Macci would skew results.
Good stuff guys.
YUP
Won't be enough.7900 should be out soon
oh yes it wil be enough
the ati raping wil be soon enough there..
G71 clocks up to 710mhz on stock air,thats not bad
Yeah, i'm afraid you're right. G71 should OC like a beast.
So, when's ATI's next refresh?
This is an expensive hobby.
Not bad yes, but it needs 750MHz to match/beat the x1900xt. 60MHz increase is not very impressive too, considering the x1900xt can go up to 700-750MHz on air which is 100-125MHz extra.oh yes it wil be enough
the ati raping wil be soon enough there..
G71 clocks up to 710mhz on stock air,thats not bad
Anyways, we shall see.
My watercooling experience
Water
Scythe Gentle Typhoons 120mm 1850RPM
Thermochill PA120.3 Radiator
Enzotech Sapphire Rev.A CPU Block
Laing DDC 3.2
XSPC Dual Pump Reservoir
Primochill Pro LRT Red 1/2"
Bitspower fittings + water temp sensor
Rig
E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB
I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.
Just squeezed by Kinc!
"There's no chance that the iPhone is going to get any significant market share. No chance." -- Microsoft CEO Steve Ballmer
How about a gentleman's agreement to run an additional set of benchmarks at 1600x1200 with 4xaa and 8xaf among all the top scorers and post those results along with your default settings results so we can actually see there's a difference between two card types.. because 5% difference makes no difference as far as I'm concerned.
Just a thought!
Congrats as always to top ORB benchmarkers!
I had the fastest 32M Opteron time for about 1/2 day, and I'm damn proud of it
If it's only a 230 point difference, then it'll EASILY be enough to take back the 05 crown. It's not going to need much more to take that down with ease!Won't be enough.
Pretty low. They aren't done yet i bet.Radeon X1900 CF running at pretty low frequencies: 800/843 MHz
Anyway, i bet G71 will rock the house, but i think i'll keep my X1900.
It's nice to see the extremes slug it out though.
Imagine 3 solid containers
Then imagine ln2.
Or just conroe. lmao
If you have a cooling question or concern feel free to contact me.
The thing is if you do that, nvidia gets beaten by a large margin. This much is well known.
My watercooling experience
Water
Scythe Gentle Typhoons 120mm 1850RPM
Thermochill PA120.3 Radiator
Enzotech Sapphire Rev.A CPU Block
Laing DDC 3.2
XSPC Dual Pump Reservoir
Primochill Pro LRT Red 1/2"
Bitspower fittings + water temp sensor
Rig
E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB
I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.
wow. i bet that was the best 7 3DMarks ever squeezed out of hardware..
"Roses are FF0000, Violets are 0000FF, All my base are belong to you."
Asus P6X58D-E
I7 930 @ 3.9
Asus 660ti DirectCU OC
Antec Twelve-Hundred
I'll take a better IQ over a few fps that the eye cant recognize anyway, anyday, expecially since im running on 1600+ res
x1900xt
they are second one 2001 ...
http://service.futuremark.com/orb/projectsearch.jsp
Willis I think your misunderstanding that the amount of points that seperate those two scores isn't really that much. Those who benchmark know this as well. First and second place mean nothing on their skill, knowledge, talent, whatver. They are simply the best OC'ers around and both uncomparable to each other. Plain and simple, nice work guys. Very impressive!
In addition to what BSill said, there somethings you are missing. Here are both scores:
Both macci and hipro are masters in the art, no one can deny that. But everyone also knows that 3dmark01 is more a CPU than a GPU bench, but the GPU still plays a role. On top of that, everyone knows that dothans dominate any A64 clock for clock.
With these things taken into account, hipro was running at 41xxMHz on the dothan, and macci only at 34xxMHz on the FX-60. On top of that, the cards macci used were watercooled vs what hipro used (@ -25c? I know it was below zero).
I am sure that an fx-60 at 3.7Ghz in macci's hands will go above and beyond 55k.
My watercooling experience
Water
Scythe Gentle Typhoons 120mm 1850RPM
Thermochill PA120.3 Radiator
Enzotech Sapphire Rev.A CPU Block
Laing DDC 3.2
XSPC Dual Pump Reservoir
Primochill Pro LRT Red 1/2"
Bitspower fittings + water temp sensor
Rig
E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB
I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.
fx-60 is dual core i believe that is something dothan dont have.
Iam not an intel fan but the new DUO core yonah cores could be dangerous.
i7 6700K @4.8 ghz
XSPC RayStorm (very nice block)
Z170 Sabertooh ,, 32GB- Gskill (15-15-15-36 @3600 mhz) 1:1
XFX-7970 with Swiftech Komodo nickel block
Water Cooling - MO-RA3 Pro with 4 Silverstone 180mm @ 700 rpm, Twin Vario mcp-655 pumps
Samsung 850-1TB SSD,, OCZ ZX-1250W (powerfull and silent)
Crossfire 30" decent monitor for IPS too bad SED tech died
Docsis2.0
Docsis3.0
-- People who reject the idea that "government has a responsibility to reduce income inequality" give an average of four times more than people who accept that proposition.
macci was not water cooled, he was dice on both gpus: http://www.techpowerup.com/reviews/ATI/RD580OC/
THos pics are acutally ours, well tpus
Last edited by sin0822; 03-02-2006 at 08:40 PM.
and Hipro5 is only with ONE CARD, not two...
BTW, this score won't last too long... MickeyMouse, now has a dual core that bench @ 3.7ghz
Posting Permissions
Reply With Quote
Bookmarks