Still testing....w00t. Oh and I forgot to post a shot of the ram volts....but believe me when I say this....this was done at 2.5V in the bios, no additional.
Still testing....w00t. Oh and I forgot to post a shot of the ram volts....but believe me when I say this....this was done at 2.5V in the bios, no additional.
YUP
YUP
Hey,
other then the vid card, and the fact that my opty is a CABYE 0535 XPMW,
we have almost identical hardware..........using a BT right now.
So you have no objections to me using your settings to try and get an OC out of my OPTY?
I may just flash to the same bios........woudl you mind sharign the settings, see if we can get similar gains?
I would really appreciate the help.
Thanks,
fermiNow Dave will see FERMI where ever I go
Originally Posted by jbartlett323
So please return to the "Darkside of the Moon" and check your "Pulse" while you wait for the "Animals" that will be "Obscured By Clouds". And watch me wave as I say "Wish You Were Here" in "A Momentary Lapse of Reason"
what is the 1st 4# of your s/n#?
lap told me they had about 4000 pairs with best week chip and about 1000 pairs already shipped out and mix inside the 0602
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
my buddy ordered a pair from newegg last week and they're 601, I guess 602 will hit the street in couple more weeks since the egg still has lots of them in stock.
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
heheheh everyday they order about 100 pairs for CA and another 100 for NJ!!
they already had 0602 for 2~3 weeks
and.... just wait for few days!
another discount in newegg again
Feel free to contact ustech@gskillusa.com or use our G.Skill Q&A Sub-Forum, if having any questions about G.Skill products
Check out our items on NewEgg
I have no idea....didn't even look at the numbers. I'll try to when I get a chance. I'll have some updated results soon.
YUP
got a set of 602 today from egg. i'll have to test them out now.
the RAM is at my GF's house with the rest of my computer.......I have yet to look at the RAM, not to mention open the box!
fermiNow Dave will see FERMI where ever I go
So please return to the "Darkside of the Moon" and check your "Pulse" while you wait for the "Animals" that will be "Obscured By Clouds". And watch me wave as I say "Wish You Were Here" in "A Momentary Lapse of Reason"
hmm my 602 would have been good if 1 stick wasn't DEAD. OH WELL RMA TIME
Every cpu is different guy. Just have to try it and see where you go. Just cause you get a similar or same cpu type as me, doesn't mean yours will go as high or lower. Just experiment.
YUP
Hit 2.6GHz with Ram installed, only thing I changed was the FSB 260X10, I will play with it more over the weekend!!!!!!
WOOOOOHOOOOOOOOOOOOOOOOOOOOOOOOOOOO
fermiNow Dave will see FERMI where ever I go
So please return to the "Darkside of the Moon" and check your "Pulse" while you wait for the "Animals" that will be "Obscured By Clouds". And watch me wave as I say "Wish You Were Here" in "A Momentary Lapse of Reason"
I order today the GSkill PC4000 HZ from the egg also. I hope I get the 602
I have this sticks:
And OC is poor, max 3d stable is 280MHz@8-4-4-3@2.75V
Ok, you right, but i expected 300Mhz...
280 is good, 300 is great but hard to come by, if you want to sell your HZ for cheap please pm me and I'll get them off of your hands
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
i sent my hz in for rma a few weeks ago due to a bad stick, and after just checking, both the new sticks are 0602, i didnt know a certain batch was doing better than the others, ill test them out soon and post back.
m3a79-t | 2 sets of 4gbpq | phenom II 720be cooled by TRUE | hd4850
corsair 550vx | 6400aaks raid 0 5000aaks raid 0 | Lian Li 1100B
Damn, Newegg has a $18 rebate starting today. Check it out http://www.newegg.com/Product/Produc...82E16820231021 If I waited for one more day...... oh well, I hope the new HZs are 602.
EVGA 680i
2 X 2GB GSkill DDR800
E8400 @ 4.2 Ghz (1.36 Vc)
ATI x1900xt
ToC 22" Samsung
Dude 300mhz isn't even guarenteed with TCCD..Ok, you right, but i expected 300Mhz...
250mhz is but anything above that is the grace of god and Samsaung...
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
My set is a 602, just checked, ordered last week from Newegg for 196$!
fermiNow Dave will see FERMI where ever I go
So please return to the "Darkside of the Moon" and check your "Pulse" while you wait for the "Animals" that will be "Obscured By Clouds". And watch me wave as I say "Wish You Were Here" in "A Momentary Lapse of Reason"
or the ballistix, even though they have the top 15 spots or so in the OC'ing database
Got a fan over those memory sticks? No? Well get to it before you kill them
Got them last week, borderline stable @ 250.
@ least the old stuff did 270 (in another computer)
So back they go to newegg, will see what come back....
yet if I remember correctly they also had a bad habit of dying in later batches..or the ballistix, even though they have the top 15 spots or so in the OC'ing database
Overclocking is doing more than is expected of the hardware...
Expect nothing, aim for everything
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
hehe, well said. though one has to draw the line of what to expect. i think 1mhz over stock is a reasonable limityet if I remember correctly they also had a bad habit of dying in later batches..
Overclocking is doing more than is expected of the hardware...
Expect nothing, aim for everything
Got a fan over those memory sticks? No? Well get to it before you kill them
hehe, well said. though one has to draw the line of what to expect. i think 1mhz over stock is a reasonable limit
DDR400 ram.. I always try to see if it will do DDR800
and take the Simple 2Ghz AMD and aim for 4Ghz
Fast computers breed slow, lazy programmers
The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
http://www.lighterra.com/papers/modernmicroprocessors/
Modern Ram, makes an old overclocker miss BH-5 and the fun it was
Posting Permissions
Reply With Quote
Bookmarks