Page 1 of 3 123 LastLast
Results 1 to 25 of 58

Thread: TeamGroup Kit 2X1GB pc4000 UCCC rev.D

  1. 01-23-2006, 01:51 AM #1
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781

    TeamGroup Kit 2X1GB PC4000 Samsung UCCC

    TEAMGROUP DDR500 2x1GB 3.4.4.8

    Ic Samsung UCCC





    System Configuration

    Fx57 (molti at 9x)
    Dfi nf4 sli-dr bios 623-3
    6800 GS by Club3d 425/1000
    Windows Xp Sp2
    Forceware 81.95 whql

    Settings all Motherboards DFI for BEST PERFOMANCES with this ram

    CPC = Enabled
    CAS Latency(CL) = 3
    RAS to CAS(Trcd) = 4
    Min RAS# Active time(Tras) = 8
    Row Precharge Time(Trp) = 4
    Row Cycle Time(Trc) = 7
    Row Refresh Cycle Time(Trfc) = 14
    Row to Row Delay(Trrd) = 2
    Write Recovery Time(Twr) = 2
    Write to Read Delay(Twtr) = 1
    Read to Write Delay(Trwt) = 3
    Refresh Period (Tref) = 3210
    Write CAS Latency(Twcl) = 1
    DRAM Bank Interleave = Enabled
    Skew = AUTO
    Skew Value = 0
    DRAM Drive Strength = auto
    DRAM Data Drive Strength = auto
    Max Async Latency = 8ns
    Read Preamble Time = 5ns
    Dram time = Fast
    Idle Cycle Limit =256
    Dynamic Counter = Enabled
    R/W Queue Bypass = 16x
    Bypass Max = 7x
    32 byte Granularity = Disable(4burst)
    Last edited by gigi77; 01-24-2006 at 01:30 AM.
    Reply With Quote Reply With Quote
  2. 01-23-2006, 01:52 AM #2
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    The new revision IC samsung like low voltages, 2.6-2.7v

    I Show SPi, 3dmark01, Memtests for Best Stability


    285mhz Show Pi 32mb 3.4.4.8

    Reply With Quote Reply With Quote
  3. 01-23-2006, 04:42 AM #3
    Revv23
    Revv23 is offline
    I am Xtreme
    Join Date
    Dec 2002
    Posts
    5,931
    Send a message via AIM to Revv23
    Not Bad.
    Reply With Quote Reply With Quote
  4. 01-23-2006, 05:18 AM #4
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    Not bad!

    GO UP....

    Luigi
    Reply With Quote Reply With Quote
  5. 01-23-2006, 05:34 AM #5
    Lestat
    Lestat is offline
    I am Xtreme
    Join Date
    Feb 2005
    Location
    SiliCORN Valley
    Posts
    5,543
    Send a message via AIM to Lestat Send a message via MSN to Lestat
    nice how much is that kit and where can it be purchased ?
    "These are the rules. Everybody fights, nobody quits. If you don't do your job I'll kill you myself.
    Welcome to the Roughnecks"

    "Anytime you think I'm being too rough, anytime you think I'm being too tough, anytime you miss-your-mommy, QUIT!
    You sign your 1248, you get your gear, and you take a stroll down washout lane. Do you get me?"

    Heat Ebay Feedback
    Reply With Quote Reply With Quote
  6. 01-23-2006, 09:51 AM #6
    Revv23
    Revv23 is offline
    I am Xtreme
    Join Date
    Dec 2002
    Posts
    5,931
    Send a message via AIM to Revv23
    Quote Originally Posted by gigi77
    Not bad!

    GO UP....

    Luigi
    Is something i said wrong?

    thats not bad, ive seen G.skill UCCC 2x1gb running at 300mhz, so yeah, 285 is not bad, but its not the greatest thing ever either.

    You got a good set of ram there, congrats.
    Reply With Quote Reply With Quote
  7. 01-23-2006, 11:36 PM #7
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    290mhz 3.4.4.8

    [/
    Reply With Quote Reply With Quote
  8. 01-23-2006, 11:39 PM #8
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    295mhz show 16mb Spi

    Reply With Quote Reply With Quote
  9. 01-23-2006, 11:51 PM #9
    Revv23
    Revv23 is offline
    I am Xtreme
    Join Date
    Dec 2002
    Posts
    5,931
    Send a message via AIM to Revv23
    Wow, now i am very impressed indeed.

    What got you up there? Or had you just not tried yet?
    Reply With Quote Reply With Quote
  10. 01-23-2006, 11:55 PM #10
    nn_step
    nn_step is offline
    YouTube Addict
    Join Date
    Aug 2005
    Location
    Klaatu barada nikto
    Posts
    17,574
    Very nice where can I pick up a set?
    Fast computers breed slow, lazy programmers
    The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
    http://www.lighterra.com/papers/modernmicroprocessors/
    Modern Ram, makes an old overclocker miss BH-5 and the fun it was
    Reply With Quote Reply With Quote
  11. 01-24-2006, 12:36 AM #11
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    Quote Originally Posted by nn_step
    Very nice where can I pick up a set?
    1 kit of 20 reached this perfomances!

    Reply With Quote Reply With Quote
  12. 01-24-2006, 12:39 AM #12
    nn_step
    nn_step is offline
    YouTube Addict
    Join Date
    Aug 2005
    Location
    Klaatu barada nikto
    Posts
    17,574
    ok but where Can I buy one.. So that I can compair it with a Known good set of sticks
    Fast computers breed slow, lazy programmers
    The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
    http://www.lighterra.com/papers/modernmicroprocessors/
    Modern Ram, makes an old overclocker miss BH-5 and the fun it was
    Reply With Quote Reply With Quote
  13. 01-24-2006, 12:44 AM #13
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    ok
    Reply With Quote Reply With Quote
  14. 01-24-2006, 12:46 AM #14
    high5
    high5 is offline
    Xtreme Enthusiast
    Join Date
    Jun 2005
    Posts
    632
    gigi, how about some pics of the RAM... preferably without the HS.

    the pic you posted here is old one, from here
    [SIGPIC][/SIGPIC]
    Reply With Quote Reply With Quote
  15. 01-24-2006, 12:49 AM #15
    nn_step
    nn_step is offline
    YouTube Addict
    Join Date
    Aug 2005
    Location
    Klaatu barada nikto
    Posts
    17,574
    How about a nice link to an online seller that ships this to the states
    Fast computers breed slow, lazy programmers
    The price of reliability is the pursuit of the utmost simplicity. It is a price which the very rich find most hard to pay.
    http://www.lighterra.com/papers/modernmicroprocessors/
    Modern Ram, makes an old overclocker miss BH-5 and the fun it was
    Reply With Quote Reply With Quote
  16. 01-24-2006, 12:59 AM #16
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    Quote Originally Posted by high5
    gigi, how about some pics of the RAM... preferably without the HS.

    the pic you posted here is old one, from here
    ok!

    the MAX Scores

    Reply With Quote Reply With Quote
  17. 01-24-2006, 01:02 AM #17
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    SHOW 3D perfomances....
    Reply With Quote Reply With Quote
  18. 01-24-2006, 01:29 AM #18
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    3D Perfomances :dup:





    Reply With Quote Reply With Quote
  19. 01-25-2006, 11:59 AM #19
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Great Gigi!!!
    I have buy my 2 kit of dual channel from 2GB... 1 Micron and 1 Samsung UCC...I will try soon
    Price are very good!!!
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  20. 01-25-2006, 10:09 PM #20
    Print
    Print is offline
    Registered User
    Join Date
    Jan 2006
    Posts
    6
    Is this UCCC rev.D or rev.C?

    rev.C http://www.xtremesystems.org/forums...&highlight=uccc

    rev.D http://www.xtremesystems.org/forums...ead.php?t=87294
    Reply With Quote Reply With Quote
  21. 01-25-2006, 10:17 PM #21
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    Quote Originally Posted by Print
    Is this UCCC rev.D or rev.C?

    rev.C http://www.xtremesystems.org/forums...&highlight=uccc

    rev.D http://www.xtremesystems.org/forums...ead.php?t=87294
    Rev.D is in mass production after chinese new Year.

    Sorry for my error

    Luigi
    Last edited by gigi77; 01-26-2006 at 12:16 AM.
    Reply With Quote Reply With Quote
  22. 01-26-2006, 12:26 AM #22
    high5
    high5 is offline
    Xtreme Enthusiast
    Join Date
    Jun 2005
    Posts
    632
    good job on drawing attention though...
    [SIGPIC][/SIGPIC]
    Reply With Quote Reply With Quote
  23. 01-26-2006, 08:33 AM #23
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Today I have make a fast run with my 2x1GB Teamgroup pc4000(Micron chip)

    It's very good ram: (Vga default)


    Spi 8M @ 255 with 2.7V and timings soft...possible to improve the settings...
    Last edited by nachthymnen; 01-26-2006 at 08:52 AM.
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  24. 01-27-2006, 11:00 AM #24
    gigi77
    gigi77 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Location
    italy
    Posts
    781
    Go Up Nachtyman!
    Reply With Quote Reply With Quote
  25. 01-27-2006, 04:00 PM #25
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    I'm testing the 2x1GB micron and it's very funny in OC...not the best settings but not a bad start...
    SPI 16M @ 250 1:1 3/3/3/7...2.9V just for test...close 16M also @ 2.7/2.8v.
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules