Project finished and presented at the 1st Modding and cooling Show from ColdZero / PCdiga
Some specs:
- compressor Danfoss SC10CL
- Pump Laing D5 - Ecocirc
- Evap temp controller
- HX tube inside tube
- Reservoir Termometer
- Condenser fan controller
- Liquid pressure sensor
- Aluminium box - 2 coat paint
Special Thanks to Dima (PCDiga) and Frio Valadares !
very cool, but al that work for a chiller, why dont people just go direct die?
Originally Posted by sin0822
the 1st use for it will be to cool 2 GTX's 512 Mbs in SLI
just wanted something easy to adapt to them
Nice job and excellent pics!
Wow amazing job, is that a kink though?
q6600 @ 2.6
EVGA 680i
OCZ fatal1ty ddr2 800
8800gt SLI
watercooled
yeah, i noticed the kink too....LOL! have to say, though, that's wicked impressive.
dave
Heat: 50 - 0 - 0 under "Argus333"
Can't speak for everyone but in my case extreme air was replaced with watercooling kit from corsair, it was replaced with top of the line DangerDen setup. Now the next step for me is learning the next phase of cooling. For me thats researching and studying about phase cooling and I choose to start with a chiller, I have no doubts that with the help of Chilly1 and runmc, and others who came before me that I will learn much and build a kick ars chiller. A very knowlegable man named Gary Lloyd talked about the potential of chillers and there awesome capabilities. With the right setup a chiller unit is not much bigger then a single stage DD. And all that work is the foundation for moving onto more Xtreme cooling. when I get ready to move onto DD I will have the knowledge and experience required for that type of system. So thats why I choose to put all the time and effort into building my chiller, I hope it looks a nice as Blaster and performs as well or better.
By the way great work Blaster
Last edited by catkicker; 12-19-2005 at 11:06 PM.
DFI LP UT P35T2R || X6800 Conroe|| XFX GTX280 || GSkill 2GB PC8500 DFI LP SLIDR || AMD 170 opteron || GSkill 2GB PC4000 HZ || XFX 8800GTS (G92) || OCZ GameXStream 700W.
PC Power & Cooling 750 Quad
EVGA780i || E6750 GO || 2xEVGA 8800GTX || Crucial Ballistix PC2-8500 D9 ||Seventeam Hurricane 1200W
HEAT
very nice chiller there
Thnx guys !
... but whats a kink ?
lol
when tubing is bent.Thnx guys !
... but whats a kink ?
lol
q6600 @ 2.6
EVGA 680i
OCZ fatal1ty ddr2 800
8800gt SLI
watercooled
Can't speak for everyone but in my case extreme air was replaced with watercooling kit from corsair, it was replaced with top of the line DangerDen setup. Now the next step for me is learning the next phase of cooling. For me thats researching and studying about phase cooling and I choose to start with a chiller, I have no doubts that with the help of Chilly1 and runmc, and others who came before me that I will learn much and build a kick ars chiller. A very knowlegable man named Gary Lloyd talked about the potential of chillers and there awesome capabilities. With the right setup a chiller unit is not much bigger then a single stage DD. And all that work is the foundation for moving onto more Xtreme cooling. when I get ready to move onto DD I will have the knowledge and experience required for that type of system. So thats why I choose to put all the time and effort into building my chiller, I hope it looks a nice as Blaster and performs as well or better.
By the way great work Blaster
i second that, awsome chiller too!
Nice,
Very nice, your to be comended. I hope mine will be that nice one day.
RussC
Very good job.
0.0 beautiful *tear*
Check out my forum: http://www.anarchyst-it.com
How much money did you spend on all of that?
Impressive though, looks so clean and neat.
I would have put that kink IN the box though
I think the kink is simply a piece of tubing used to cover the in/out of the unit
It wont be used when system is running
lol finnaly I figured out whats the kink lol
yeah, that tube is just there to cover the in and out of the cooling liquid, better for transportation heheh
now its replaced by tygon r3603 that lead to a MCW50 thats cooling the gcard, im still waiting for another MCW55 to make an "Y" junction so i can cool both gcards in parallel
take care guys
nice and clean job! Well done
At the end it came out very nice and clean , well done .
What CPEV is that? Whats the capacity and orafice size. Im looking at using one.
RussC
Great chiller, love the finish!
G
i do know its a 00 orifice but dont know the capacity, it was a used valve from ice cream machine
Thnx guys !
... but whats a kink ?
lol
a REALLY fun girl
Specs
Asus 780i Striker II Formula
Intel E8400 Wolfdale @ 4050Mhz
2x2GB OCZ Platinum @ 1200Mhz 5-4-3-18
MSI 5850 1000Mhz/5000Mhz
Wester Digital Black 2TB
Antec Quatro 850W
Cooling
Swiftech Apogee
Swiftech MCP-600
HardwareLabes Black Ice Extreme 2
Audio Setup
X-fi w/AD8066, Clock mod, & polymer caps > PPAV2 > Grado SR60 & Grado SR325i & Beyerdynamic DT770 Pro & Beyerdynamic DT990 & AKG K701 & Denon D2000
Posting Permissions
Reply With Quote
Bookmarks