MMM
Page 1 of 9 1234 ... LastLast
Results 1 to 25 of 207

Thread: Japanese Racecar Radiator cooled SLI Setup

  1. 12-12-2005, 10:44 AM #1
    Zenjirou
    Zenjirou is offline
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Long Beach, CA
    Posts
    291
    Send a message via AIM to Zenjirou

    Japanese Racecar Radiator cooled SLI Setup

    I know some people use Car Radiators in passive setups. I bought this Koyo Race Car Radiator (US $75 Ebay) for passive cooling. I previously had a BIX, MCP350 and 3/8" Tubing. This revision inclues:

    7/16" Tubing
    Iwaki MD20-RZG2
    Koyo Radiator

    The Components:

    Asus A8N SLI Deluxe
    A64 Venice 3000+
    3X Samsung Spinpoint 200GB HD
    Ultra Wizard Case

    Watercooling:
    Polarflo CPU,GPU Blocks
    Maze 4 Chipset block








    I removed the 3.5" Bays thinking the Pump will fit in that spot, but I am not so sure it can once I put it in.
    Last edited by Zenjirou; 12-12-2005 at 05:37 PM.

    ------------------Pushing the delta between idle and load, to the limit------------------
    KoyoThread
    7900GT 705/2040, DFI Ultra D AE0, Opty 146 3.10 Ghz, MP01 +MP05 . CPU: 19/21 GPU:24/28 Fan/Shround in progress..
    Reply With Quote Reply With Quote
  2. 12-12-2005, 12:06 PM #2
    Disposibleteen
    Disposibleteen is offline
    Xtreme Mentor
    Join Date
    Oct 2004
    Location
    Cleveland OH USA Bored?: You Know It
    Posts
    2,892
    Send a message via AIM to Disposibleteen
    Hook it all up and give us some temps.
    Reply With Quote Reply With Quote
  3. 12-12-2005, 12:31 PM #3
    freecableguy
    freecableguy is offline
    Banned
    Join Date
    Jun 2003
    Location
    Broomfield, CO
    Posts
    3,882
    Send a message via Skype™ to freecableguy
    mount that baby outside and plumb it inside with copper piping and then use tygon to the system....
    Reply With Quote Reply With Quote
  4. 12-12-2005, 12:37 PM #4
    MAXIMILIAN
    MAXIMILIAN is offline
    Xtreme Member
    Join Date
    Dec 2005
    Posts
    100
    holy fuuck butter
    Reply With Quote Reply With Quote
  5. 12-12-2005, 12:48 PM #5
    mindwreck
    mindwreck is offline
    Xtreme Member
    Join Date
    Nov 2005
    Location
    Los Angeles, CA
    Posts
    376
    Send a message via AIM to mindwreck
    what are the dimensions on that thing? you could probably run that thing passive and still get good temps
    Reply With Quote Reply With Quote
  6. 12-12-2005, 12:59 PM #6
    Zenjirou
    Zenjirou is offline
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Long Beach, CA
    Posts
    291
    Send a message via AIM to Zenjirou

    Compaired with Black Ice Xtreme
    Next to Iwaki and 80mm and 92mm fan
    Last edited by Zenjirou; 12-13-2005 at 06:21 PM.

    ------------------Pushing the delta between idle and load, to the limit------------------
    KoyoThread
    7900GT 705/2040, DFI Ultra D AE0, Opty 146 3.10 Ghz, MP01 +MP05 . CPU: 19/21 GPU:24/28 Fan/Shround in progress..
    Reply With Quote Reply With Quote
  7. 12-12-2005, 01:21 PM #7
    Bloody_Sorcerer
    Bloody_Sorcerer is offline
    beefin' it up!
    Join Date
    Dec 2004
    Location
    WPI
    Posts
    2,457
    is that thing copper or alumi?
    Reply With Quote Reply With Quote
  8. 12-12-2005, 03:17 PM #8
    Zenjirou
    Zenjirou is offline
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Long Beach, CA
    Posts
    291
    Send a message via AIM to Zenjirou
    Everything in the setup is copper except the barbs.

    ------------------Pushing the delta between idle and load, to the limit------------------
    KoyoThread
    7900GT 705/2040, DFI Ultra D AE0, Opty 146 3.10 Ghz, MP01 +MP05 . CPU: 19/21 GPU:24/28 Fan/Shround in progress..
    Reply With Quote Reply With Quote
  9. 12-12-2005, 03:35 PM #9
    Aphex_Tom_9
    Aphex_Tom_9 is offline
    Xtreme Addict
    Join Date
    Aug 2004
    Location
    NYC
    Posts
    1,020
    Send a message via AIM to Aphex_Tom_9
    woooow, $75 for all that? gonna be sweet.
    "Monolith" - [ Xeon W3540 (4.22) - Rampage 2 Extreme - 12 GB Ripjaws 1600 - GTX 570 - 120 GB OCZ Vertex - Antec TruePower 750W - Corsair 700D - Apogee XT CPU Block - XSPC 360 Rad ]
    Old Box - [ E4600 2.4 @ 3.7ghz (11x335) - P5W-DH - 4gb Gskill @ 893mhz - Radeon 3850 ]
    Reply With Quote Reply With Quote
  10. 12-12-2005, 03:38 PM #10
    MAXIMILIAN
    MAXIMILIAN is offline
    Xtreme Member
    Join Date
    Dec 2005
    Posts
    100
    doood, I want one, would it perform btter than a thermochill?
    Reply With Quote Reply With Quote
  11. 12-12-2005, 04:49 PM #11
    Bloody_Sorcerer
    Bloody_Sorcerer is offline
    beefin' it up!
    Join Date
    Dec 2004
    Location
    WPI
    Posts
    2,457
    I hope that wasn't a serious question?
    there's no way possible that that couldn't perform better... soooooo much friggin surface area O_O
    Reply With Quote Reply With Quote
  12. 12-12-2005, 04:57 PM #12
    mnewxcv
    mnewxcv is offline
    Xtreme Addict
    Join Date
    Jul 2005
    Location
    Melrose, MA USA
    Posts
    1,047
    Send a message via AIM to mnewxcv Send a message via Yahoo to mnewxcv
    take off ur side panel, put that in its place, and hook up a window fan.
    Quote Originally Posted by Call me Ugly
    This lead to the unfortunate incident regarding the family dog spilling my beer.. rest in peace Lassie.. rest in peace.
    Reply With Quote Reply With Quote
  13. 12-12-2005, 06:11 PM #13
    Mr. Tinker
    Mr. Tinker is offline
    Xtreme Addict
    Join Date
    Sep 2004
    Location
    Fantasia
    Posts
    1,297
    what need is there for a fan? I bet the water would cool down to ambient by the time it reaches the other side of the rad if it were just sitting slightly above the ground horizontally.
    ebay under aws983s, heatware under Mr. Tinker.
    Reply With Quote Reply With Quote
  14. 12-12-2005, 06:46 PM #14
    Zenjirou
    Zenjirou is offline
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Long Beach, CA
    Posts
    291
    Send a message via AIM to Zenjirou
    3 Samsung Spinpoints 200gb



    Had to move Harddisks up in 5.25 Bays. No Air flow there, so Had to tie down a 92MM Fan. Hopefull it will be enough.
    Last edited by Zenjirou; 12-12-2005 at 06:49 PM.

    ------------------Pushing the delta between idle and load, to the limit------------------
    KoyoThread
    7900GT 705/2040, DFI Ultra D AE0, Opty 146 3.10 Ghz, MP01 +MP05 . CPU: 19/21 GPU:24/28 Fan/Shround in progress..
    Reply With Quote Reply With Quote
  15. 12-12-2005, 10:45 PM #15
    chinkgai
    chinkgai is offline
    Xtreme Enthusiast
    Join Date
    Jan 2005
    Posts
    551
    numbaaars!!!
    Reply With Quote Reply With Quote
  16. 12-12-2005, 11:29 PM #16
    KoukiFC3S
    KoukiFC3S is offline
    Xtreme Member
    Join Date
    Nov 2005
    Posts
    118
    haha nice
    I got a koyo in my car
    X2 2.7GHz - 2GB Patriot EP - Abit AN8 SLI
    Reply With Quote Reply With Quote
  17. 12-12-2005, 11:51 PM #17
    MaxxxRacer
    MaxxxRacer is offline
    Xtreme X.I.P. MaxxxRacer's Avatar
    Join Date
    Aug 2004
    Location
    Los Angeles, Ca USA
    Posts
    12,551
    Send a message via AIM to MaxxxRacer Send a message via MSN to MaxxxRacer
    chinkgai:

    Spellcheck!!!!!!
    Reply With Quote Reply With Quote
  18. 12-13-2005, 12:42 AM #18
    Zenjirou
    Zenjirou is offline
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Long Beach, CA
    Posts
    291
    Send a message via AIM to Zenjirou
    Hard Disk Fan Fits

    Figuring out Tubing Path

    Pump is not going to fit... I guess it must be mounted outside.
    7/16" Tubing on 1/2" Barbs tight fit
    Last edited by Zenjirou; 12-13-2005 at 12:56 AM.

    ------------------Pushing the delta between idle and load, to the limit------------------
    KoyoThread
    7900GT 705/2040, DFI Ultra D AE0, Opty 146 3.10 Ghz, MP01 +MP05 . CPU: 19/21 GPU:24/28 Fan/Shround in progress..
    Reply With Quote Reply With Quote
  19. 12-13-2005, 12:49 AM #19
    Dragoon42
    Dragoon42 is offline
    Xtreme Member
    Join Date
    Oct 2005
    Posts
    230
    holy cow that's insane. I can't wait for you to test that thing. I'm really interested to see how it'll do passive
    Reply With Quote Reply With Quote
  20. 12-13-2005, 07:28 AM #20
    187(V)URD@
    187(V)URD@ is offline
    Xtreme Member
    Join Date
    Mar 2005
    Location
    Belgium
    Posts
    292
    reminds me of my little tractor rad I bought 2 years ago .
    You don't need a reservoir for it but zenjirou stuff is way bigger.
    Attached Thumbnails Attached Thumbnails Click image for larger version.  Name: 128-2836_IMG.jpg  Views: 3669  Size: 142.1 KB  ID: 41068   Click image for larger version.  Name: 130-3071_IMG.jpg  Views: 3600  Size: 182.2 KB  ID: 41069  
    E6400@3.2GHZ | P5B deluxe |8800GTS 512MB | 2*250GB Hitachi + 500GB WD|
    Aerocool masstige | Seasonic 600W |
    MX510@450HZ | 24" LG 245WP
    Cooled by: Swiftech storm - MCP 655 - Maze4/EK vodni block - Nexxos Dual Extreme

    A64 3000+@2.9ghz // XP M 2500+@2.5ghz // XP M 2600+@2.6ghz benchable at 2.9ghz superpi 35s //
    AMD opteron 146@3GHZ CABYE APMW batch 0076
    Reply With Quote Reply With Quote
  21. 12-13-2005, 04:57 PM #21
    Zenjirou
    Zenjirou is offline
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Long Beach, CA
    Posts
    291
    Send a message via AIM to Zenjirou
    I could not find any reducer to Connect the Tubes to the Inlet/Outlet
    The Radiator Inlet and Outlet I measured to be 19/20 of an inch ~ 1 Inch. I am using 7/16" ID 5/8" OD Tubing. Any ideas appreciated. Thanks

    --Edit: The Reducers (1" to 1/2") are available at Mcmaster. Thanks ShadowingFx for the info.--

    Last edited by Zenjirou; 12-13-2005 at 06:09 PM.

    ------------------Pushing the delta between idle and load, to the limit------------------
    KoyoThread
    7900GT 705/2040, DFI Ultra D AE0, Opty 146 3.10 Ghz, MP01 +MP05 . CPU: 19/21 GPU:24/28 Fan/Shround in progress..
    Reply With Quote Reply With Quote
  22. 12-13-2005, 05:09 PM #22
    Okda
    Okda is offline
    Egyptian OverClocker
    Join Date
    Mar 2005
    Location
    Cairo, Egypt
    Posts
    3,356
    Send a message via ICQ to Okda Send a message via MSN to Okda
    the piece of metal u used to install the HDD in the 5" bays, have u made them or u bought them ?

    cause i can't find anything similar to it here in EGypt and i need to know the details of its dimension please
    Soon to be :
    ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410

    Used to be: SaFrOuT
    Reply With Quote Reply With Quote
  23. 12-13-2005, 06:07 PM #23
    Gimmpy224
    Gimmpy224 is offline
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    DFW
    Posts
    991
    omg 0.o i want one of those radiators...

    exscuse me now i have to go change my pants after seeing that thing 0.o

    Quote Originally Posted by freecableguy
    I'll come blow on your heatsink for a dollar. Thats pretty ghetto
    Quote Originally Posted by Xeon th MG Pony
    sorry to sound harsh but so would you if some one asked if nitroglycerin was a good coolant for his car!
    Check out my forum: http://www.anarchyst-it.com
    Reply With Quote Reply With Quote
  24. 12-13-2005, 06:13 PM #24
    Zenjirou
    Zenjirou is offline
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Long Beach, CA
    Posts
    291
    Send a message via AIM to Zenjirou
    Quote Originally Posted by SaFrOuT
    the piece of metal u used to install the HDD in the 5" bays, have u made them or u bought them ?

    cause i can't find anything similar to it here in EGypt and i need to know the details of its dimension please
    I purchased them. They seem very simple in design. If you plan on making one I will give you dimentions (pm). Though For the cost of making them it may be better to buy and ship to Egypt. I bought 3 of them. But I found a site which has them in Packs of 10.

    http://www.buy.com/retail/product.as...=0&dcaid=17379

    Power Supply , Seasonic S12 600Watt Arrived Today. Zerex Super Coolant is scheduled to arrive Fryday. I am ordering 1" to 1/2" Reducers tonight from Mcmastser to connect the Tubes to the Radiator Inlet and Outlet.

    (BTW, Heat shrink tubing is not Shrinking for some reason . I am sleaving PSu right now.) I guess I'll use electrical tape
    Last edited by Zenjirou; 12-13-2005 at 06:19 PM.

    ------------------Pushing the delta between idle and load, to the limit------------------
    KoyoThread
    7900GT 705/2040, DFI Ultra D AE0, Opty 146 3.10 Ghz, MP01 +MP05 . CPU: 19/21 GPU:24/28 Fan/Shround in progress..
    Reply With Quote Reply With Quote
  25. 12-13-2005, 07:06 PM #25
    Okda
    Okda is offline
    Egyptian OverClocker
    Join Date
    Mar 2005
    Location
    Cairo, Egypt
    Posts
    3,356
    Send a message via ICQ to Okda Send a message via MSN to Okda
    thanks for ur help but i think shipping them to egypt won't be a good idea since ti will cost me more than their original price to shi to EGypt plus adding the taxes and customs i will pay to take them

    between this site buy.com won't ship to Egypt anyway so i can't order from it :s
    Soon to be :
    ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410

    Used to be: SaFrOuT
    Reply With Quote Reply With Quote
Page 1 of 9 1234 ... LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules