Vapo XE modding

[Jort]

Yesterday and today i worked on a Vapo XE for someone, he is making a casemod with a LianLi V2100.

So he asked me i could lenghten the flextube and regass it and do some mods on it.

These pics will walk you trough the things i changed, i'll comment above each pic.
have a nice read:king:

I placed a desuperheater to cool the gasses before they enter the condensor.





Then unbrazed the piece of tube between the suction filter/drier and flex hose.



After that i sawed the piece of extra flex line at the right dimentions. it is 20 Cm
long.



Then i "widened" a copper piece of 1/4" so i could put the flex lines into it.





Brazed one side of it.



Made a new tube to put between the flex line and the suction filter/drier, where the capillair comes.



Wraped the capillair back around the suction F/D, and placed it where it belongs.



This means at the exit of the liquid line filter/drier.



Little overview.



Piece where the 2 flex line's come together.



Little bit of frost frost



The first boot.



Some pics of the unit.









Tested on my venice and this is what i got, max superpi 1M stable.



Temps never got higher then -27


greetz

Jort

[Marvin]

Nice Jort.
Have you changed the gas ?
Shouldnt have you change the filter/dryer ?
regards

[Moonman]

Looking nice, very clean work.
Which gas?

Can you tell more about "I placed a desuperheater to cool the gasses before they enter the condensor."
How much did you gain?

[Jort]

I charged it with R507, at 1bar

didn't test without desuperheater, R507 is stressing the compressor mor then 134a thats why


before i got it the display only said -20, but he said the tempsensor was doing wierd so i changed it too

[Nosfer@tu]

Nice pictures

[Alec]

is it just me or do the pics have dead referring URLs?

[n00b 0f l337]

Links are dead.

[Jort]

just wait a second

host went down and i just waited till someone would ask :p

have dedicated hosting now, no more free crap

[Alec]

*waits*

Can't wait to see em lol

[Alec]

Aha, they are back

Awesome work dude, really professional looking and looks like it holds the load well - what gas did ya use?
I have a vapo LE in a custom case - just redone all the insulation shizzle and removed a kink in the pipework, I shall take some piccies for ya


Are you making up a case for him aswell or what?

[Ssilencer]

Nice job Jort

Made a new tube to put between the flex line and the suction filter/drier, where the capillair comes
Wraped the capillair back around the suction F/D, and placed it where it belongs
This means at the exit of the liquid line filter/drier.

That's not a filter drier, it's just an acumulator.

[Jort]

i know but its an emty shell of a filter drier:p

tnx guys

[Jort]

Aha, they are back

Awesome work dude, really professional looking and looks like it holds the load well - what gas did ya use?
I have a vapo LE in a custom case - just redone all the insulation shizzle and removed a kink in the pipework, I shall take some piccies for ya


Are you making up a case for him aswell or what?

no i don't that for the owner, but i heared its on hold due study and some stuff

you wanne see some vapoXE in case stuff, i have one here.
its a nice one i think

http://www.belgium-coolingsolutions....apoXE_in_case/

spend some time on this one

[SustaiN]

Hmm did you charge it with R507 only? I think the compressor will suffer but I might be wrong. Really nice job anyway!

[Alec]

damn sweet job dude!
really making use of its compact design

[Jort]

Hmm did you charge it with R507 only? I think the compressor will suffer but I might be wrong. Really nice job anyway!

this is not the only BD35F compressor i charged with R507, no problems so far

[Nosfer@tu]

http://www.belgium-coolingsolutions....s_timtitanium/

Like your LS mod Do you know display temp at 200 Watt?

I just got a XE with BD35F. How long time do you invest in changing gas and so on?

Just so I know how much it would cost to geet done here in denmark

[Jort]

http://www.belgium-coolingsolutions....s_timtitanium/

Like your LS mod Do you know display temp at 200 Watt?

I just got a XE with BD35F. How long time do you invest in changing gas and so on?

Just so I know how much it would cost to geet done here in denmark

no id for the 200W heatload.

i'll might test it when where going to put some ln² on the 780 again.
so i can test the vapo for a moment.

mhh all the stuff i buyed was pritty expensive, regass a XE shouldn't cost more then 50-75 euro max

[Nosfer@tu]

That is an okay price

My m8 wants it for his 560J but I dont belive It will be abel to handel it. So Im going to recommend him to regass it

THX alot for you quick answer