Got 4000+ San Diego , how about Cold Bug?

[Onepagebook]

hi guys, I got this 4000+ San Diego this morning.
Looks not bad at all.
After the some test results below, I try to get it under PCICE's cascade.
Too bad I can 100% confirm that San Diego still got COLD BUG
and even worse than venice does.
How, becuase it won't boot below -40 evap reading. I did observe
the temp at it get into windows, it's about -30 evap reading. Higher than that,
it just locked up and reboot itself.
Too bad, I don't have single change to try that. so I only do some serious Air cooling.[/color]

here is the -115c again...



Default Test:

CPU itself:



** I feel Bachus is right about not to only run the pi 1m, so I run the 3d 05 instead of it.**

all the default tests:











some little bit OC actions:










I am really in bad mood now. so did not get any further, but I will get some water cooling results
to see how it goes.

[D_o_S]

That's a real pain. A new cascade and you can't use it. I feel sad for you.

[chunkylover77]

Man OPB that sucks.

[Kunaak]

well that sucks...

[charlie]

This brings in some REAL dark clouds to the FX57 crowd... I may just go and buy DUMO's FX-55!!!!!!!!!!

C

[cpulloverclock]

OPB, I can boot at -45 evapo but I have some bugs
You have the same stepping than me

2.91GHz benchable stock cooling at 1.55v

[Onepagebook]

This brings in some REAL dark clouds to the FX57 crowd... I may just go and buy DUMO's FX-55!!!!!!!!!!

C

you right, I am like ..AMD you deserve---->

But OPB is OPB,
I got Sik's fx55 here tomorrow. So I now verified that Jedi master's point about " hold your fx55" is the da0n right choice. Absolutely NO WONDER.

Cpulovecolock, yes!
it's about that.

[charlie]

DUMO,

YHPM !!

[[XC] leviathan18]

OPB that is sad to hear if you try with peltier and wc???? maybe you can OC higher

[esdee]

that sucks, AMD really needs to solve this

[charlie]

you right, I am like ..AMD you deserve---->

But OPB is OPB,
I got Sik's fx55 here tomorrow. So I now verified that Jedi master's point about " hold your fx55" is the da0n right choice. Absolutely NO WONDER.

Cpulovecolock, yes!
it's about that.

yeah, I did say that, didn't I????



http://www.xtremesystems.org/forums/...ight=guys+hold

[Bennah]

So they dont work that well on Single Phase Change then cpulloverclock.

I still have no doubt that I wouldnt have a problem with my Venice even with Dry Ice. can go all the way as PC ICE as show. Just need it in my hands

[Onepagebook]

yeah, I did say that, didn't I????



http://www.xtremesystems.org/forums/...ight=guys+hold

So it never be too late to hunt your fx55 back, but make sure don't get the new one especially after 0515.

[bachus_anonym]

Man... That looks to me like ~$1700 just went down the drain

I hope I will swallow that the day FX-57 comes out, but I think it won't be cascade benchers first choice anymore

I'm telling you Kevin, there must be a way to get it to work... Like with my Winnie @ -47C evap. It will NOT boot WHATSOEVER at this temperature.
I always turn on the cooler and start my system. System does not boot but I let it running, to get hot. Then I turn off the cooler and wait until temp goes -10C on evap. Then I RESET and system boots to Windows. Once I'm there, I turn on the cooler and see how temperature drops to -44C on evap and -23C on CPU. I can do whatever I want at that point.
Problem is, that in 9 out of 10 cases, when I Restart the system it will not boot up again... BUT! Sometimes it does, when just before I RESTART it, I run just some of "Memtest for Windows" or "Prime95" to get it under load. Then I quickly restart it and it boots

Try those tricks if you haven't already. Or try to boot at different multis (like me, I can boot @ x10 but not @ x9... It freezes in Windows when I do that). Also, try to boot with divider on your memory...

Whatever it takes, Kevin

[charlie]

I smell a real nice combo:
VapoChill XE and an FX57!!!!
Or one of Chilly1 or PCICE's fancy new single stager's!!

C

[Bennah]

Ive got the same smell coming over here

[Onepagebook]

Man... That looks to me like ~$1700 just went down the drain

I hope I will swallow that the day FX-57 comes out, but I think it won't be cascade benchers first choice anymore

I'm telling you Kevin, there must be a way to get it to work... Like with my Winnie @ -47C evap. It will NOT boot WHATSOEVER at this temperature.
I always turn on the cooler and start my system. System does not boot but I let it running, to get hot. Then I turn off the cooler and wait until temp goes -10C on evap. Then I RESET and system boots to Windows. Once I'm there, I turn on the cooler and see how temperature drops to -44C on evap and -23C on CPU. I can do whatever I want at that point.
Problem is, that in 9 out of 10 cases, when I Restart the system it will not boot up again... BUT! Sometimes it does, when just before I RESTART it, I run just some of "Memtest for Windows" or "Prime95" to get it under load. Then I quickly restart it and it boots

Try those tricks if you haven't already. Or try to boot at different multis (like me, I can boot @ x10 but not @ x9... It freezes in Windows when I do that). Also, try to boot with divider on your memory...

Whatever it takes, Kevin

Ya Good idea. BUT think about my cooling is -115c...

[charlie]

The ONLY good thing about a cold bug, is that it put's benching back into the old days when everyone had approx the same CPU power, give or take a little from CPU luck...

For 3DMark racing, it's a leveling factor! EXCEPT that now FX55 130nM/cascade will rule for a while to come!!

[Onepagebook]

The ONLY good thing about a cold bug, is that it put's benching back into the old days when everyone had approx the same CPU power, give or take a little from CPU luck...

For 3DMark racing, it's a leveling factor! EXCEPT that now FX55 130nM/cascade will rule for a while to come!!

You 're right master.
And now..s7e9h3n said :"Jesus, that would be a very good reason to be pissed. I'll get on the phone with my amd guy in a sec and see what's goin on....."

[prc8]

In that thread above it says to weaken the drive strength.

did your try that opb?

[Onepagebook]

In that thread above it says to weaken the drive strength.

did your try that opb?

I don't quite get it, would you please explain more?

OPB

[cpulloverclock]

weird, it's doesnt boot at -40C evapo??

set the vcore at 1.7v and after try again

[NiCKE^]

Oh man that sux. Wonder if the 90nm semprons got a cold bug? Mind trying it out OPB

[Onepagebook]

weird, it's doesnt boot at -40C evapo??

set the vcore at 1.7v and after try again

nope..tried it already..

[cpulloverclock]

nope..tried it already..

at 1.4v I have -50 evapo and it boots

not normal