ABIT Fatal1ty AA8XE volt mod request

[rav286k1]

Hi! guys,
someone can help me? I would like to voltmod my Fatal1ty AA8XE (vdroop, FSB etc..)
Someone can help me?
Thanks in advance.
Bye, Andrea.

[CaTalyst.X]

Pot a picture of the board

-CaT

[rav286k1]

Pot a picture of the board

-CaT

Thanks CaTalyst.

I post a link from a pictures by HardOCP.

http://img136.exs.cx/my.php?loc=img1...7rln17l5xo.jpg

Please tell me if you need specified pictures.

[rav286k1]

Thanks CaTalyst.

I post a link from a pictures by HardOCP.

http://img136.exs.cx/my.php?loc=img1...7rln17l5xo.jpg

Please tell me if you need specified pictures.

up

[CaTalyst.X]

Whats written on the ICs i circled, and can u take closer pics of the areas those ICs are in. Also mayhave to remove the otes.

-CaT

[persivore]

Can you get photos of the areas I've circled. I don't know if you want a Vdimm mod as well, but I've circled a possible area for it anyway. I can't see any Vcore regulator on that picture, but it might be one of the chips I have marked.

Edit: oops, CaT got there first!

[skuliaxe]

Hi, saw CaTalyst.X referring to this post over at extremeoverclocking, well this or another Vold mod post.
Anyway, I have the Fatal1ty AA8XE and didn´t have much to do so I took some pictures I couldn´t reach 2 places due to huge HS and GPU coolers

Here´s what I got so far:

[rav286k1]

Hi, saw CaTalyst.X referring to this post over at extremeoverclocking, well this or another Vold mod post.
Anyway, I have the Fatal1ty AA8XE and didn´t have much to do so I took some pictures I couldn´t reach 2 places due to huge HS and GPU coolers

Here´s what I got so far:

Many thanks skuliaxe, well done.
You save me from take my old camera and get photos
Hope CaTalyst.X could be help me.....

[persivore]

Can you tell me what is written on the chips I have circled. These will probably be controlling the Vdd.
Also, can someone try to get a picture of the area under the 16x PCIe slot please.

[skuliaxe]

I´ll get into the following tomorrow;
1) More pics of the circeled areas, with better resolutions.
2) Take my Gfx card out and get a good pic there...

I can´t get a pic of the CPU area though My HS has a H metal bracket that covert that whole area!

[bh2k]

Hi, saw CaTalyst.X referring to this post over at extremeoverclocking, well this or another Vold mod post.
Anyway, I have the Fatal1ty AA8XE and didn´t have much to do so I took some pictures I couldn´t reach 2 places due to huge HS and GPU coolers

Here´s what I got so far:

heh, could have taken the pics with the IC Markings up so I could read them

[rav286k1]

I´ll get into the following tomorrow;
1) More pics of the circeled areas, with better resolutions.

Me too
This afternoon I post my images.
Come on guys, let's voltmod this motherboard!

[skuliaxe]

heh, could have taken the pics with the IC Markings up so I could read them

IC markings? Don´t understand...hehe

Anyway, got a few more pics here.
..::Warning to 56K modem speeds, each pic is about 1.6Mb::..
I uploaded the stock photos to a host so I don´t have to reduce the size/quality...

Pic "mr.big" shows why I can´t get a good pic of the cpu area...

[rav286k1]

Great skuliaxe!

And great "Mr.Big"

[bh2k]

IC markings? Don´t understand...hehe

Anyway, got a few more pics here.
..::Warning to 56K modem speeds, each pic is about 1.6Mb::..
I uploaded the stock photos to a host so I don´t have to reduce the size/quality...

Pic "mr.big" shows why I can´t get a good pic of the cpu area...

The writing on the chips, those are called IC markings. They tell you what the chip is, who made it, and what it does.

[persivore]

I think the Vdimm and either the Vagp (or VPCIe or whatever it is now), Vdd or Vfsb are controlled by W3302s's. I can't find any datasheet for this chip, and without the datasheet its very hard to find out which pin is the one you need to do the mod on.
I think the Vcore regulator is a HIP6302, but I can't see that chip on the picures anywhere, so its probably under MOSFET cooling thing.

[rav286k1]

I think the Vdimm and either the Vagp (or VPCIe or whatever it is now), Vdd or Vfsb are controlled by W3302s's. I can't find any datasheet for this chip, and without the datasheet its very hard to find out which pin is the one you need to do the mod on.
I think the Vcore regulator is a HIP6302, but I can't see that chip on the picures anywhere, so its probably under MOSFET cooling thing.

[persivore]

If I can get the datasheet for the regulators there shouldn't be any problem with finding the mods, but I've emailed winbond twice to try to get the data sheets and I haven't got any response yet . If someone can find the HIP6302 Vcore regulator I will find the droop and Vcore mods.

[ukveld]

droop mod for both AA8XE and AA8XE Fatality would be awesome

[CrazyXP1700]

indeed it would...
would this mod be the same for the AA8 duramax aswell? or should is start writing down some IC's for you guys...
my cpu cant go farther with out a droop mod...
and my cpu isnt' down for high FSB with a 20X multi... (anyone got a cascade for this thing? )

[rav286k1]

If I can get the datasheet for the regulators there shouldn't be any problem with finding the mods, but I've emailed winbond twice to try to get the data sheets and I haven't got any response yet . If someone can find the HIP6302 Vcore regulator I will find the droop and Vcore mods.

I Hope Winbond will reply to you....
By now I thank you very much for your efforts

[rav286k1]

Could you help you?

http://www.alldatasheet.com/datashee...L/HIP6302.html
http://www.alldatasheet.com/datashee...IP6602BCB.html

P.S. AA8 does have W83302s's. Peraphs mod is the same.... (sorry for my poor English).

Bye, Andrea.

[rav286k1]

any news????

[persivore]

I've emailed Winbond 3 times now, and I've had no reply. If you can find a mod which uses the same chip I should be able to adapt the mod to work with this board tho

[rav286k1]

Many thanks persivore for your kind collaboration.
I've emailed to Winbond too. No reply
I'm searching.....