Corsair XLPT pass DDR 680 cas 2.5 on DFI nf4 Ultra D.

**linhvndiy** · 03-11-2005, 07:08 PM

Corsair XLPT ver 1.2 pass DDR 680 on DFI nf4 Ultra D.
New Corsair PCB rock.
vram 3.0v.
Still continous.

SS low because CPU x8 only. Aircool with Hyper 6.

**iddqd** · 03-11-2005, 09:10 PM

Maye they just decided it's time to bin the damn chips?

**EnJoY** · 03-11-2005, 09:11 PM

Wow! Nice results, I think you have the record for highest Corsair XL OC, most of the high TCCD oc's come from G.Skill and OCZ.

**linhvndiy** · 03-11-2005, 09:24 PM

Thanks. But i think i can do more. Will update more result.

**$0m#0n#** · 03-11-2005, 10:27 PM

Originally Posted by EnJoY

Wow! Nice results, I think you have the record for highest Corsair XL OC, most of the high TCCD oc's come from G.Skill and OCZ.

Not most, me & HARDCORECLOCKER we have A-DATA TCCD & I am memtest stable @312 2.5-3-3-5 1T

his results r also very good

**dimasdw** · 03-12-2005, 12:01 AM

what revision ?

**AnAlYZeR** · 03-12-2005, 12:13 AM

great ram indeed

**Dissolved** · 03-12-2005, 12:51 AM

Originally Posted by linhvndiy

Corsair XLPT ver 1.2 pass DDR 680 on DFI nf4 Ultra D.
New Corsair PCB rock.
vram 3.0v.
Still continous.

SS low because CPU x8 only. Aircool with Hyper 6.

those the 300dollar ram with the lcd on the sticks?

**$0m#0n#** · 03-12-2005, 01:06 AM

Originally Posted by Dissolved

those the 300dollar ram with the lcd on the sticks?

rofl, I think yes

**Dissolved** · 03-12-2005, 01:08 AM

Originally Posted by $0m#0n#

rofl, I think yes

those looks cool, i wouldnt mind haveing some that did 270 2.5-3-3-7

**majkel84** · 03-12-2005, 02:19 AM

Maybe you should try to tighten RAS Precharge to 3 and loosen TRas respectively ?? You could gain some bandwidth making so i think...

And if you're only trying to reach max. freqency then Tras should go much higher, cause 6 is quite tight- especialy for rest timings loosen as much

**Dissolved** · 03-12-2005, 02:28 AM

wait is this really 340fsb 1:1 ?

**$0m#0n#** · 03-12-2005, 02:50 AM

Originally Posted by Dissolved

wait is this really 340fsb 1:1 ?

yep

**Dissolved** · 03-12-2005, 03:48 AM

Originally Posted by $0m#0n#

yep

holy.. whats the highest tccd clock then?

if this really is 340 1:1 how come its not getting more attention? ive only seen like 315 maybe 330fsb 1:1 (i dont pay much attention to highest fsb anymore)

**Spoo** · 03-12-2005, 04:31 AM

Originally Posted by Dissolved

those the 300dollar ram with the lcd on the sticks?

I don't think so

**linhvndiy** · 03-12-2005, 07:21 AM

It's a pair Corsair TwinX512-XLPT ver1.2 with new Corsair PCB. Not Xpert ram. Very hard to touch OPB.

**dimasdw** · 03-12-2005, 08:26 AM

can my corsair XLPT rev 1.1 reach HTT like that

?
now the highest HTT is 307...now i am still trying to OC again

**iddqd** · 03-12-2005, 12:29 PM

Originally Posted by $0m#0n#

rofl, I think yes

No. No LCD, no LEDs. XLPT is just a regular "platinum" (gray) heatspreader. The one with LEDs is XLPRO and the one with LCD is XLXPERT

**Djake** · 03-13-2005, 09:49 AM

I got a pair Corsair TwinX512-XLPT ver1.2 too.. How much voltage should I give them? Where’s the sweet spot?

**TEDY** · 03-13-2005, 11:07 AM

2.9-3.0

**pancake** · 03-13-2005, 11:44 AM

how come his smart guardian shows agp vaults? on a dfi ultra d nf4?

**Jamo** · 03-14-2005, 06:05 AM

i'll believe it when i see a cpu-z verified link, those timings at that speed seem a little too good to be true

**Napoleonic** · 03-14-2005, 06:11 AM

great!

how about more voltage? 2.5-4-4-8? can it hit 375? even magnificient 400 with cl3?

**Bennah** · 03-14-2005, 09:12 AM

lol, i think your teking it too far now

**linhvndiy** · 03-14-2005, 05:14 PM

New bench sisoft at 345 2.5 4 3 7 with 3,1v vram. I still not try relax timing.
Sweet spot i think is 2.9v to 3.1v to run 24/7. Max i tried 3.2. I will try more.

Thread: Corsair XLPT pass DDR 680 cas 2.5 on DFI nf4 Ultra D.

Thread Tools

Search Thread

Rate This Thread

Display

Corsair XLPT pass DDR 680 cas 2.5 on DFI nf4 Ultra D.

Bookmarks

Bookmarks

Posting Permissions