CPU:K8 939 0.09u 3000+ 0448SPMW
MEM:TCCD256MBx2
M/B:MSI NEO4 Ultra(MS-7125) BIOS:1.2B
VGA:MSI NX6600GT
H.D:Quantum AS 30G IDE ATA100
Cooler:VapoChill LightSpeed [AC]
PSU:Zippy500W
![]()
![]()
johnnyliu3377
CPU:K8 939 0.09u 3000+ 0448SPMW
MEM:TCCD256MBx2
M/B:MSI NEO4 Ultra(MS-7125) BIOS:1.2B
VGA:MSI NX6600GT
H.D:Quantum AS 30G IDE ATA100
Cooler:VapoChill LightSpeed [AC]
PSU:Zippy500W
![]()
![]()
johnnyliu3377
CPU:Socket 939 FX-53@2.6G 1.5V(260x10)
M/B:MSI K8N NEO2 Platinum
MEM:A-data DDR600 TCCD 512MBx2(5-3-3-2.5 1T)
VGA:ATi X800XT Platinum Edition
3D01:30425(540/600) 3D03:15377(633/633)
![]()
Nice mobo from MSI too.
Regards.
Opteron 170 @ 2.2Ghz - Zalman 9700
OCZ Pc3200 2x512Mb VX @ 220Mhz
DFI nF4 SLI-DR ( 3.29 BIOS )
Leadtek 6800GT@415-1120
Seagate Barracuda 2x120Gb Raid0
This is the rule :P
0448 is the best week
2.96GHz ok at 1.65v on air
I love XS
![]()
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
That must be some fantastic ram too.
Awesome
retired computer enthusiast
Very nice indeed
AMD Phenom II 720 @ 3.8ghz
DFI Lanparty DK 790FXB-M2RS
2x2GB Corsair XMS2 PC8500
Gainward HD4870 1GB @ 860/1130
Thermaltake TP 750w
Custom Water
Very very nice. What ram are you using?
I use Apacer TCCD DDR500 ram
CPU v-core no mod,because MS-7125 BIOS 1.2B may adjust 1.375v to add on 23% voltage,explains the voltage method is furnishing 1.375V may add 23% then software to have with clockgen 1.375V furnishing 1.45V V-core on 1.76V.....![]()
More......
PWM IC ISL6566 pin9 connects a VR50K to GND mod v-core, but I attempt by no means, friend of mine had has experimented and has succeeded![]()
Last edited by johnnyliu3377; 01-23-2005 at 06:37 PM.
CPU:Socket 939 FX-53@2.6G 1.5V(260x10)
M/B:MSI K8N NEO2 Platinum
MEM:A-data DDR600 TCCD 512MBx2(5-3-3-2.5 1T)
VGA:ATi X800XT Platinum Edition
3D01:30425(540/600) 3D03:15377(633/633)
whoa fantastic... got to get one of those winnies to play with!!![]()
Me likey..![]()
Does the neo4 use another vcore chip than the diamond series ... i thougt these board maxed out a 1.65 and cannot be modded due tue the chip that was used.Originally Posted by johnnyliu3377
Can someones explain this :S :P
Cpu: Core i7 930 @ 4.5 Ghz 1.4V (24/7)
Mainboard: Classified E760 @ B3 X58 + EK Waterblock
Memory: 6GB Kingston Hyper @ 2150Mhz 8-8-8-28 -> 1.72V
Graphics Card: HD5870 + EK-Waterblock
Soundcard: Auzentech X-Fi Forte
Boot HDD: WD Velociraptor 300 GB
Stuff HDD: 4x 1TB Samsung HD103UJ @ Raid5 (Perc 5i + 512MB)
PSU: Corsair 1000Watt Modulair
Water Cooling Setup: WC Setup --> Swiftech Apogee XT / Black Ice 360 GTX / 3x Triebwerk TK-122 / 2x DDC 355 Plus + XSPC Dual Top / EK-Spin Bay Reservoir
All build in a Corsair Obsidian 800D
very nice clocks.![]()
real nice clocks![]()
System #1:
i7 975 for bench, W3540 @ 4,4 Ghz HT On, Asus P6X58 Premium, 3x2048 Corsair Dominator 2000CL7, Sapphire 5970 @ stock, Corsair HX1000, 1xOCZ Vertex2 120GB, 3x1TB WD Green
Cooled by:
Loop 1: Watercool HK rev 3.0, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 2: EK 5970 Nickle, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 3: EK Asus NB/SB, Mips Asus Mosfet 1 + 2, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.2 /w Phobya Fans @ 5V Pull
4,6Ghz (21x220) 1,42Vcore with Single Stage (HT enabled)
http://img402.imageshack.us/img402/1251/83962063.jpg
AMD @ testing
X4 955, Asus Crosshair III, same Rams as on Intel Setup, Sapphire 4870X2 @ Stock, PC Power&Cooling 910W
can it run 3d
that rams only 512
are these winnys getting better or is this just a gem
0448 are gems indeed.
when are these available may have to get one and vmod it.
Abit KN9-SLI
X2 3800+
1gb corsair pc5400
2 evga 7900gt
200gb maxtor sata
ocz 520w
heatware:althes
ebay althes
Nice will mod the SLI Platinum when i get it tomorrowOriginally Posted by µnrealneo²
![]()
![]()
Cpu: Core i7 930 @ 4.5 Ghz 1.4V (24/7)
Mainboard: Classified E760 @ B3 X58 + EK Waterblock
Memory: 6GB Kingston Hyper @ 2150Mhz 8-8-8-28 -> 1.72V
Graphics Card: HD5870 + EK-Waterblock
Soundcard: Auzentech X-Fi Forte
Boot HDD: WD Velociraptor 300 GB
Stuff HDD: 4x 1TB Samsung HD103UJ @ Raid5 (Perc 5i + 512MB)
PSU: Corsair 1000Watt Modulair
Water Cooling Setup: WC Setup --> Swiftech Apogee XT / Black Ice 360 GTX / 3x Triebwerk TK-122 / 2x DDC 355 Plus + XSPC Dual Top / EK-Spin Bay Reservoir
All build in a Corsair Obsidian 800D
@johnnyliu3377 ( sorry :| ) :Originally Posted by cpulloverclock
.. Temp ?
@cpulloverclock0450....on MSI Neo2 , cooler = ultra voltex...
Last edited by Zanr Zij; 01-24-2005 at 02:59 PM.
nice speed!
vapochill LS is what I wanna get![]()
this week I am getting winny 3000+ or 3200+![]()
...
nice nice , congrats
AMD 3500 WINNIE-DFI NF4 ULTRA-2X512 OCZ PC4000 VX-SAPPHIRE X850XT-CREATIVE GIGAWORKS 7:1(700WATT RMS)-COOLERMASTER STACKER+CROSSFLOWFAN+WINDOW PLEXI-200 GB SEAGATE-AEROCOOL GATEWATCH-LOGITECH MX 1000-ENERMAX 470(MODDED BY HIPRO SOON)-NEON LIGHTS-LED FANS X5
When are these available may have to get one.![]()
Nice Nice
Link please bios 1.2b
thanks
luigi
Originally Posted by johnnyliu3377
Congrats man - fantastic speed for a WINNIE - AFAIK best I've ever seen so far, but how did You trick the SUBZERO problem ???
![]()
Previous system:
DFI NF4 ULTRA 0453A3 KOREA CHIPSET / BIOS 510-2FIX / FX-57 0516WPMW@3.62GHZ / 2x256 CORSAIR 3200LLPT BH-5@13x278MHZ 2-2-2-5@3.69VDIMM / MACH II GT@MOD BY BERKUT / ACTIVE COOLING FOR RAM - MOSFETS - GPU RAM / CHIPSET & GPU CORE WATERCOOLED / OCZ POWERSTEAM 600W / BUILT BY ATI X850XT@660/651 - VGPU@1.73-VDD@2.26-VDDQ@2.21 PENCIL MOD / WIN XP 2x80GB SAMSUNG SPINPOINT SP80 SATA - RAID 0 & WIN 2K 40GB SAMSUNG SPINPOINT SP40 IDE BENCH DRIVE / PIC
![]()
----------------><------------------
Please link download bios beta 1.2 for k8n sli platinum
thanks
luigi
HereOriginally Posted by gigi77
Bookmarks