Saw this over at OC Forums.
Crazy
Saw this over at OC Forums.
Crazy
OMFG the board I have been waiting ages for :O:O *counts pennies and waits for release*
OMFG!!!!!!!!!!!!
i am so gonna buy this, omfg!
anyone know when i can use 2x 6800gt/ultra for SLI?
Will be able to do when the mobo releases? omfg cant wait.-..
There are some eVGA 6800U PCI-E backordered...
So i'm pretty sure you can buy 2 of those when this board comes out.
My plan is to buy this crazymobo + Top-Of-The-Line 6800U,
Then after a month or 2 i'll add another one...
But, my 6800GT i have now, can i buy another 6800GT and mix them together with SLI?
Does the gfx not need the SLI connector stock?
Should be able to. I have a 6600 GT at home which is SLI compatible. I'm sure the SLI connector comes with the motherboard.
OMG!
*please dear mighty god, don't let it be more expensive then 150€ / 170US-$*
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
Yeah it is going to be a bad @ss board...but I wouldn't nowhere near have the money to buy the board Skt939 AMD64 and 2 GFXs cards. That is alot of money right there. I will stick with what I got and watch the results of how this board does.
is ur current GT agp or pci-e?Originally Posted by Troopah
if its the later u will be ok - if its AGP - pretty sure SLI is pci-e only?
it has to be PCIe.....SLI is PCIe-only
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
PCI-E only. Also you need a card that has approved by nvidia to work in SLI, you can't just get a 5900 PCI-E and run it SLI mod...
p4z1f1st:
Yeah that is my wish too...
ugp:
These days a 939 can be very value.
But if you want the best you need to spend some money on dual cards
Still you can get NF4 (You get nice performance boost and some new features) SLI mobo + one SLI card, when save some extra money you can add another one...
It's the best upgrade path... That's why a wated SO long!
wow thats feaking nuts! is it just me or did anybody else notice the 4 pin connector on the mobo?
Specs
Asus 780i Striker II Formula
Intel E8400 Wolfdale @ 4050Mhz
2x2GB OCZ Platinum @ 1200Mhz 5-4-3-18
MSI 5850 1000Mhz/5000Mhz
Wester Digital Black 2TB
Antec Quatro 850W
Cooling
Swiftech Apogee
Swiftech MCP-600
HardwareLabes Black Ice Extreme 2
Audio Setup
X-fi w/AD8066, Clock mod, & polymer caps > PPAV2 > Grado SR60 & Grado SR325i & Beyerdynamic DT770 Pro & Beyerdynamic DT990 & AKG K701 & Denon D2000
Yep I just figured my card is teh AGP ^_^
I'll just sell it.. man o man dfi nf4 with 2x 6800gt... makes me just wanna sleep for some months and buy it when i wake up :P
To cool you off a little bit, the DFI reps at dfi-street.com keep saying they have got no specific details about the upcoming DFI Socket939 boards. So the board pictured might as well be just a "show-off sample" never to be produced in count of more than one.
Here: http://www.dfi-street.com/forum/show...?threadid=2412
On the other hand, we can just keep continue dreaming, nothing wrong about that And I'm doing it as well - go DFI!
away & gone
don`t the 6800 cards need the SLI connectors on the outside edge of the card??
I haven`t seen any yet with it.
The world`s only triple phase-changer PC in one case.
just a question, anybody knows if is possible to run two x800xt pci-e in the SLI mode?
Did anyone notice the Molex connector ont he motherboard below the Skt? I assume that is for the GFX system...am I right?
i don't think, ATi is not interesting by the sli modeOriginally Posted by giorgioprimo
i even don't think, that NV will give the rights for SLI to ATIOriginally Posted by giorgioprimo
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
that's so bad for me...... I'm just waithing my x800xt pci-e and planned to buy another one..... I wouldn't lik to switch on nvidia....Originally Posted by krixoff
200$+/180€+Originally Posted by p4z1f1st
pfff....ok, so noway for me....that's just too expensive.....if it would be a DualBoard, ok....but i don't think, that the PCIe-slots are that expensive, that they raise the price of their first board (Lanparty-UT) from ~110€ to 180€+....
what's going on Oskar?! tell your boss, that he shall decrease the price
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
Originally Posted by Rukee
Yeah, that's what I've seen too.
SLI Connectors at the edge of the card, where else am I supposed to plug the SLI connector?
omg its gonna be awesome!
your my idol
8 s-ata ports, lol.
Looks like a very cool board.
Bookmarks