Page 1 of 2 12 LastLast
Results 1 to 25 of 29

Thread: My 3.4E S478 with the 14 multiplier

  1. 10-06-2004, 02:06 PM #1
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock

    My 3.4E S478 with the 14 multiplier

    So, cooled by a Vapochill PE modded
    An ASUS P4P800-SE PAT disabled

    There is a problem for the Bandwidth with the 14 multiplier


    Look at this :

    by default the offset 69 is 47 -> bad perf



    with a special prog I go to the MMR and I change that

    offset 69 at 53 is better, the best is 74 but the P4P800-SE doesnt like








    No condensation without isolation


    it's the world record with Intel and DDR?


    337.19*14 and 269.75 in dual 2-2-2-5 best timings (539.5MHz DDR)


    I can do a a Superpi 1M at 336.4*14 (538MHz DDR), it gives 28s but I think at 338*14 I'd get 27s, not bad without PAT

    On clockgen I saw 368.69*14, bad detection




    New world record but impossible to send this score because my IP was already detected....




    a good score for a Prescott

    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  2. 10-06-2004, 02:12 PM #2
    saaya
    saaya is offline
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147


    congrats man!
    Reply With Quote Reply With Quote
  3. 10-06-2004, 02:15 PM #3
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    Quote Originally Posted by saaya


    congrats man!


    I'll test with 2 P4C800-dlx
    in a few days or 2 weeks

    saturday I'll have a 3.6E and AA8 duramax but I'll be away until the 18
    Last edited by cpulloverclock; 10-06-2004 at 02:17 PM.
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  4. 10-06-2004, 03:01 PM #4
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    Quote Originally Posted by µnrealneo²
    Can PAT not be enabled on P4P800SE then?
    nope only at 200 and DDR500, 533 (3:4, 4:5 ratios) I believe, the NB is unstable around 220 1:1 with pat enabled
    so that's optimized
    Last edited by cpulloverclock; 10-06-2004 at 03:04 PM.
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  5. 10-06-2004, 03:45 PM #5
    saaya
    saaya is offline
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147
    ask george (eva2000) he knows about ALL the bios files and tricks about 875 boards

    there is a bios for the abit 865pe board that lets you enable pat on ALL fsb speeds i think, so it should be possible to get it on your board as well

    ask tictac or other people ,maybe they can mod a bios

    and your getting a 3.6E? gl!
    those 3.6E prescotts are like engineer examples! just 20 of them on the whole world
    Reply With Quote Reply With Quote
  6. 10-06-2004, 03:52 PM #6
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    Quote Originally Posted by saaya
    ask george (eva2000) he knows about ALL the bios files and tricks about 875 boards

    there is a bios for the abit 865pe board that lets you enable pat on ALL fsb speeds i think, so it should be possible to get it on your board as well

    ask tictac or other people ,maybe they can mod a bios

    and your getting a 3.6E? gl!
    those 3.6E prescotts are like engineer examples! just 20 of them on the whole world
    the pat is just enabled in 1:1
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  7. 10-06-2004, 04:02 PM #7
    saaya
    saaya is offline
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147
    ahhhhhhh ok. i didnt know that... hmmmm

    doesnt really matter ahhaha your score si high enough to stop pushing it
    Reply With Quote Reply With Quote
  8. 10-06-2004, 11:39 PM #8
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    Quote Originally Posted by saaya
    ahhhhhhh ok. i didnt know that... hmmmm

    doesnt really matter ahhaha your score si high enough to stop pushing it
    I want 7600/7600
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  9. 10-07-2004, 01:17 PM #9
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    New scores

    I hope a score at 4750MHz tomorrow


    Best time in 5:4 ratio, not bad at this frequency







    I received the AA8 duramax I'll have my 3.6E saturday but I wont be here.



    A little fight between my P4C800-DLX + 3.4E + BH-5 + and my AA8 + 3.6E + Corsair PC4300U
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  10. 10-07-2004, 01:28 PM #10
    FX Freak
    FX Freak is offline
    Xtreme Member
    Join Date
    Jul 2004
    Location
    Austria
    Posts
    201
    @saaya
    you got pm
    @cpulloverclock
    is the 3,6E an E0 or an D0??

    No Overlocking Today
    Reply With Quote Reply With Quote
  11. 10-07-2004, 01:45 PM #11
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    Quote Originally Posted by FX Freak
    @saaya
    you got pm
    @cpulloverclock
    is the 3,6E an E0 or an D0??
    dont know but I think 95% D0
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  12. 10-07-2004, 01:47 PM #12
    FX Freak
    FX Freak is offline
    Xtreme Member
    Join Date
    Jul 2004
    Location
    Austria
    Posts
    201
    can i buy your 3,4E d0????

    No Overlocking Today
    Reply With Quote Reply With Quote
  13. 10-07-2004, 02:06 PM #13
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    Quote Originally Posted by FX Freak
    can i buy your 3,4E d0????
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  14. 10-07-2004, 05:53 PM #14
    enroscado
    enroscado is offline
    Xtreme Member
    Join Date
    Dec 2003
    Location
    Argentina
    Posts
    173
    @ cpulloverclock: What's that Pmem program?
    http://www.losvagos.net
    Reply With Quote Reply With Quote
  15. 10-07-2004, 10:28 PM #15
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    Quote Originally Posted by enroscado
    @ cpulloverclock: What's that Pmem program?
    a program to go in the MMR, it works with all the chipset, created by Franck Delattre

    soon a new tweaker available
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  16. 10-08-2004, 01:45 AM #16
    |-jokker-|
    |-jokker-| is offline
    Xtreme Member
    Join Date
    Mar 2004
    Location
    Portugal
    Posts
    240
    Did You tested that chip only on air ?
    My 2.8 M0 is getting old for the job .
    I´m thinking to buy a new one to replace it .


    cumps
    Reply With Quote Reply With Quote
  17. 10-08-2004, 02:30 AM #17
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    Quote Originally Posted by |-jokker-|
    Did You tested that chip only on air ?
    My 2.8 M0 is getting old for the job .
    I´m thinking to buy a new one to replace it .


    cumps
    my chip is always cooled in air
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  18. 10-08-2004, 10:42 AM #18
    Iridium192_217
    Iridium192_217 is offline
    Banned
    Join Date
    Oct 2003
    Posts
    943
    wow, thats quite good.

    what memory are you using?
    Reply With Quote Reply With Quote
  19. 10-08-2004, 11:26 AM #19
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    Quote Originally Posted by Iridium192_217
    wow, thats quite good.

    what memory are you using?
    Kingston HyperX PC3200 BH-5 + Corsair PC3200LL BH-5

    I have my 3.6E (SL7J9, L430B921) 09/21/04

    36-37°C in the bios watercooled (I havent an installed windows) at 3.6GHz and 1.4v (default)
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  20. 10-08-2004, 02:35 PM #20
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    I'm testing a prim95 at 4300MHz at 1.6v in water cooling
    Last edited by cpulloverclock; 10-08-2004 at 07:45 PM.
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  21. 10-08-2004, 10:37 PM #21
    cpulloverclock
    cpulloverclock is offline
    Xtreme Addict
    Join Date
    Nov 2002
    Location
    North America
    Posts
    2,038
    Send a message via ICQ to cpulloverclock Send a message via MSN to cpulloverclock Send a message via Yahoo to cpulloverclock
    4032MHz 100% stable at 1.37-1.38v
    I love XS

    Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications

    I want a Penryn 3.33G 12MB & quad sli Nvidia G92
    Reply With Quote Reply With Quote
  22. 10-09-2004, 12:19 AM #22
    ctgilles
    ctgilles is offline
    Xtreme Addict
    Join Date
    Jun 2002
    Location
    Belgium
    Posts
    1,501
    Send a message via ICQ to ctgilles Send a message via MSN to ctgilles
    Bonjour cpulloverclock
    Bons résultats Hehe, je veux avoir ce processeur
    Reply With Quote Reply With Quote
  23. 10-09-2004, 02:53 AM #23
    FX Freak
    FX Freak is offline
    Xtreme Member
    Join Date
    Jul 2004
    Location
    Austria
    Posts
    201
    nice
    i hope you break 5,5ghz

    No Overlocking Today
    Reply With Quote Reply With Quote
  24. 10-09-2004, 04:18 AM #24
    PnoT
    PnoT is offline
    Xtreme Member
    Join Date
    Oct 2002
    Location
    Las Vegas aka Sin City!
    Posts
    319
    Quote Originally Posted by cpulloverclock
    Kingston HyperX PC3200 BH-5 + Corsair PC3200LL BH-5

    I have my 3.6E (SL7J9, L430B921) 09/21/04

    36-37°C in the bios watercooled (I havent an installed windows) at 3.6GHz and 1.4v (default)
    Heh that's pretty funny i have the same 3200LL corsair sticks AND i just ordered up some sticks of the 3200 hyperx that is bh5

    Nice scores!
    Reply With Quote Reply With Quote
  25. 10-09-2004, 04:30 AM #25
    bias_hjorth
    bias_hjorth is offline
    Xtreme Addict
    Join Date
    Mar 2003
    Location
    Denmark
    Posts
    2,055
    Send a message via MSN to bias_hjorth
    very nice results dude
    Amazing the PE can keep up the pace
    "M-I-A"
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules