heres a good website for both NVidia and ATI bios, mainly newer videocard like the X800 and 6800, but theres alot of FX bios there too.
and various flash utilities.
like always flashing your card is your risk, you screw it up and it's your fault, not the wesbite you download the file from or anything else, cause no one made you try it.
if you find your card is screwed up, you can do various little things to fix it.
I like using this way to fix screwed up Nvidia flashes.
"Nvflash 4.42" use the command "nvflash -e"
that command will erase the epprom and let you start clean, when the bios is clean, you need a PCI videocard, in you PC along with the AGP card...
use the PCI card as your videocard, not the AGP.
then get back into nvflash and flash your card back to its original bios before you messed it up.
other then that, theres a whole forum here full of people willing to help, so just post in here
Extracting your bios to back it up
"nvflash.exe -b backup.rom"
Lastly-Extremely Useful Post for anyone looking to mod a 6800 bios, to be a 16p or 6 vs bios, without the need of always using rivatuner.
this is some hardcore bios modding, so make sure you actually know what your doing before attempting it.
if you screw up, just make sure you have a PCI videocard around, then use the command...
NVFlash -E to erase the messed up bios, and flash to your backup bios and maybe retry again, and make sure you did it all right.
it all looks pretty easy, but could be easy to overlook a small step.
__________________
Quote:
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
if you wanna remove the throttle of a bios, all you have to do is edit the 2D speed, to be exactly the same as the 3D speed.
it would also help if you set the 2D voltage to be the same as the 3D voltage.
other then that, only Asus makes a bios with no throttling that I am aware of.
__________________
Quote:
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
if you wanna remove the throttle of a bios, all you have to do is edit the 2D speed, to be exactly the same as the 3D speed.
I tryed this on a e-VGA FX5900XT setting both 2D and 3D speeds to 509 core and 700 memory in windows, but it still performs less then on air...
...and I still get the power sentury on start-up saying the extra power cord is not plugged in.
__________________
The world`s only triple phase-changer PC in one case.
ok 2 questions:
First I have a 5900u that always comes up with the power indicator pop up and resets the clocks to like 250 or something, it is super annoying is there anyway to get rid of that?
Also what is the highest speeds stock for the 5900's?
Also I have a 9800xt is there anyway I could flash to the x800 bios? my overclock matches the 475 speeds, any performance increase to that?
the build of the 9800XT to X800 is far too different to be compatible. mostly likely, it would flash and turn on and look like some little kid that ate a whole box of fruity pebbles just threw up.
don't try that flash, it's not a good idea.
for your 5900 question-just flash it to a different brands 5900 bios.
__________________
Quote:
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
Can you help a noob who has searched.
How about some intstructions? I have 2 cards here that need to be flashed: Nvidia 5900 and a x800 pro to a xt, Can you help me on the steps for both? Windows xp pro if that matters.
I have nvflash 5.10 and the bios', but can only get that far.
Thanks so much
Bryan
Hi ! I've just reflashed my x300 se. All i did is that , i made a backup of its original BIOS , then i used RabIT to edit the BIOS. I've increased the default frequences from 325 Mhz Core to 425 Mhz , and the memory from 392(effective)
to 488. Now i wanna know if there's something else that i could do to increase the performance a little more. I was reading a few days ago , on another forum , about x800 , that can be modded to have from 8 pp to 12. Will my x300 support this? Now , it haves only 4 pp.
Thanks!
P.S When i tryed to flash it , i got an error , but i've solved it later.
Old mem setting :7040
New mem setting :7040
Old SSID: 2102
New SSID :2102
Flash type: M25PO5/C
ROM not erased!
Error 0FL01 : press '1' to continue
To fix this , use the following command : atiflash -p 0 xxx.rom -sst
IF this doesn't work to, use atiflash -f -p 0 xxx.rom -sst
I have a small issue that I would like some help with... Cant seem to fathom it out myself.
Ok, my test system is an ASUS A8N-SLI, using a pair of Gigabyte 6600GT 128MB PCIE Cards... Both REV 1.0 and both are 100% identical.
Now, I have been completely unable to gt them to SLI except with this one driver that I forget which version of the Detonators, but its the one and only one that allowed it... All others either ignored the fact that I had 2 cards, couldnt see any 6600GT at all, or said that the cards were not SLI compatible or not matching... Only one allowed me to run the cards in SLI.
God know what the version was, it recently did an update and I lost the SLI capability and so, I decided to try to flash the cards to be the same...
Now, I took one out and had a try.
I backed up the BIOS obviously, I did everythign from Floppy, but now the card simply wont display anything other than garbage.
I have tried to re-flash it back to its original BIOS, but no!
Nothing I do will sort it out.... NOTHING?
AS I said, I have a perfect card and this now seemingly dead one...
Can anyone offer me a walk-through on getting the BIOS back on the dead one??? - maybe by using the BIOS from the new one, or even the old one... The cards are both new by the way, or at least they are the same age.
Would it be possible for anyone to link me to a BIOS file that is actually the right one?
The BIOS files I have found are 6600, and 6600GT but also (VP) (D)... I think mine should be a (T)?
I cant find any with a (T) on them.
Anything will do to tryto cure this problem...
At this moment in time, I am using a basic PCI Card to help me boot, and the 6600GT is connected to a second monitor and the best I have had so far is a black screen, but Windows wont start up.... If I remove the PCI card then it will try to boot and display on the PCIE card, but alas, nothing.
Booting from Floppy and with the PCI as first, its letting me see the screen of course, but not the screen from the PCIE card.
what other place/s carry the latest 8800ultra bios ?
Euh, as far as I know http://www.mvktech.net is the only site that has those BIOS's and has a great download section... And if you don't find it there, just request it on their forums.
X300 Se
Linear Mode
