I don't often get prime hardware like this to fiddle with, but a friend wants me to do some volt mods and such, and lent me his hardware, and gave me the green light for some "Xtreme" testing
heres what I came up with today.
My Afternoon With The FX 51 And Some Dry Ice.
I don't often get prime hardware like this to fiddle with, but a friend wants me to do some volt mods and such, and lent me his hardware, and gave me the green light for some "Xtreme" testing
heres what I came up with today.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
nice! i wouldn't mind having 3158mhz in my rig
you going to give us any details?
A64 3200+ Newcastle 2.2ghz
Asus K8V SE Deluxe
2x512 Mushkin BH5
Tyan Tachyon G9800pro
NEC 8x DVDRW
Liteon 52x CDRW
2x160gb Maxtor 7200
Chaintech AV710
Lian Li v1000
this next shot is just a PCMark2002 shot.
the whole system.
I also have a benchmark with the CPU only, thats at 9988, I just for the life of me could not break 10,000 with this CPU, but this damn sure isn't anything to complain about huh?
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
don't worry max, I like to be thorough before posting some screenies.
theres lots to see in the next few minutes
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
congrats kunaak so your mobo prob is solved
When i'm being paid i always do my job through.
this is my best Super Pi shot.
this benchmark really drove me nuts, cause I can break 29 seconds at 2.9 ghz, but it took alot just to shave one more second off this bench.
but I had too, cause I had almost 3.1 ghz stable enough to atleast get one second off there
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
this particular benchmark is alot more resiliant then most.
it seems to pass at even the most unstable OC's, so it's pretty easy to keep pushing this benchmark when others fail.
I REALLY wanted to break 400 with this one, cause I was sooooo close. but alas, 395 is the best I can do with it.
on a side note, this benchmark doesn't seem to care one bit about FSB speed, just CPU speed.
anyone else notice that?
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
Is any of that 3d stable? Show some 2k1 benchies
Asus G60VX : Intel T9600@3.299GHZ : Nvidia GTX260M @ STOCK/ .9v
This Benchmark is very very finicky.
I can't seem to get a 100% reliable OC for it, cause sometimes it passes, sometimes it doesn't.
probably has more to do with temp flucuating though I'd think.
I was soooo close to 40 seconds, that I just kept doing this benchmark over and over and over....
when I hit 41.09- it was war.
I had to break 40 seconds.
and I did
I was really really happy about that, cause this is one of my favorite benchmarks.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
Like I said-I am trying to be Thorough, I know you guys want 3DMark, I would want to see it too.
so here it is.
just a unmodded R9800 Pro at 465-380.
link coming after I get through post these pics
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
And some MIPS action.
for the life of me, I couldn't break 13k no matter how much I tried.
at 3.1 ghz it freezes no matter what.
the board has no Vcore mod yet, just Vdd and Vdimm.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
you mean via? asus doesn't make a NF3Originally posted by MickeyMouse
also this still the asus nf3?? wiht the bios flashed correctly
A64 3200+ Newcastle 2.2ghz
Asus K8V SE Deluxe
2x512 Mushkin BH5
Tyan Tachyon G9800pro
NEC 8x DVDRW
Liteon 52x CDRW
2x160gb Maxtor 7200
Chaintech AV710
Lian Li v1000
nearly 13k mips! nice!
A64 3200+ Newcastle 2.2ghz
Asus K8V SE Deluxe
2x512 Mushkin BH5
Tyan Tachyon G9800pro
NEC 8x DVDRW
Liteon 52x CDRW
2x160gb Maxtor 7200
Chaintech AV710
Lian Li v1000
Give us a pic of ya system :P
this is my best bandwidth shot.
AMD64's scare me to death.
I have 2 $400 dollar key chains from running high Vdimm's so no more, not for me.
so this is only 3.2 volts.
I won't go any higher-especially with a $750 CPU that isn't even mine
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
and, this is nothing special, just the Temps.
-51c under 1.775 volts.
Next coming- Vcore mod, and try for more
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
R9800 Score-unmodded videocard running 465/380.
http://service.futuremark.com/compare?2k1=7477766
PCMark2002 Scores.
http://service.futuremark.com/compare?pcm=1685945
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
arg!!! 940.Originally posted by MickeyMouse
wrong!!! yes they do make an fx51 asus nf3
K> that cpu looks to be beter than Opp's and toms' they both need 2v+ for 3.1ghz
and pifast
i'm so in the 754 zone. i can't think straight!
/self
A64 3200+ Newcastle 2.2ghz
Asus K8V SE Deluxe
2x512 Mushkin BH5
Tyan Tachyon G9800pro
NEC 8x DVDRW
Liteon 52x CDRW
2x160gb Maxtor 7200
Chaintech AV710
Lian Li v1000
ASUS SK8N....Originally posted by Maxvla
you mean via? asus doesn't make a NF3
System
ASUS Z170-Pro
Skylake i7-6700K @ 4600 Mhz
MSI GTX 1070 Armor OC
32 GB G.Skill Ripjaws V
Samsung 850 EVO (2)
EVGA SuperNOVA 650 G2
Corsair Hydro H90
NZXT S340
MickeyMouse
yes, it's OCZ 3200-the 512 kit.
that PCmark2002 DDR score was done with a FX5200, cause I was scared at first that I might fry something and didn't wanna kill my good card.
so I used the cheap card to be safe.
yep, it's the Asus NF3 as well-the SK8N, I flashed the BIOS and fixed 9 out 10 problems this board has, but it's still alittle buggy.
for instance, when I reboot, the BIOS clock resets itself every time.
not really a big deal except it's really annoying cause Powerstrip pops up thinking my 30 day trial is up cause the clock is wrong by 2 years
well, if I remember right Toms using a R404 Prometeia, dry ice should be alittle tougher then a R404 prometiea right?
I am not going for world records.
it's hard enough to get 28 seconds.
I can't imagine trying to get the records for the benchmarks in the minutes catagory.
my heart nearly drops out of my chest just messing with 1M
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
He's got an R1150a cascade on his CPU. It looks like your friend has got a grand processor thereOriginally posted by Kunaak
well, if I remember right Toms using a R404 Prometeia, dry ice should be alittle tougher then a R404 prometiea right?
Nice benches man!
Tim Smalley @ bit-tech
Hot damn, impressive numbers my man.
Whoever's setup that is, you're a lucky person.
Nice job dude.
Yup great processor, looks to be about the same caliber as Tom's.
Now if you only had his cooling...
System
ASUS Z170-Pro
Skylake i7-6700K @ 4600 Mhz
MSI GTX 1070 Armor OC
32 GB G.Skill Ripjaws V
Samsung 850 EVO (2)
EVGA SuperNOVA 650 G2
Corsair Hydro H90
NZXT S340
is it possible that -100C isn't helping that much beyond a certain point and these CPU's have the same limit?
cause mine here is solid, almost too easy to get to 3.1 ghz.
but just past 3.1 ghz it's a downhill trip that falls real fast.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
Very nice Kunaak. I like your chip being able to bench at nice clocks and low volts maybe due to fact you run much colder than i did.
This unmodded Raddy is holding you back hard, if you could just move the core/mem slider a bit...
Keep pushing while you still can, don't waste your time posting
Posting Permissions
Reply With Quote
Bookmarks