This may not seem like much to some folks, but to the locals who know how much I've struggled with this over the last couple months ya gotta know how happy I am!

This gives me SO much more flexabilty, 320 is really all I wanted....

FWIW, here are my thoughts on this...
I get the feeling that the X6's really don't like high HTRef on low voltage memory kits.
My memory was fine all the way up to 1900Mhz (8-9-8-24) with only 1.525v, so I assumed I didn't need more mem V's to get higher HTRef clocks as long as I kept everything else in spec... WRONG!

After all this crazyness on my part (running 1 stick/dropping to 2T/loosening timings to rediculous leves etc), I checked Mushkins forums and found out that they warrantied the kit all the way up to 1.65v.
Knowing that, I cranked the Mem V's higher than I ever have in the past (Yes, I'm a voltage wuss )...
And Presto/Changeo 320 HtRef happened!

Special thanks to theoldtimer and Zeus for pointing me in the right direction!
You guys frikken rock!




BTW: CnQ is enabled on my rig, so that SS is actually @ 13x/4.16 CPU...