Unlocked Asus 5770 bios for you

[trt740]

just downloaded it from my card last night. enjoy

[Riska]

How is it unlocked?

[ColonelCain]

I'd like to know as well...

EDIT: Unless it has something like 3870's did.

[gergregg]

Originally Posted by Riska

How is it unlocked?

Like most Asus cards it has higher core and memory clock limits, allowing you to overclock further.

[Riska]

U can just use the amd gpuclock tool it have unlimmited clocks

And i am waiting for the Msi unlocked bios it wil have something like 1800/2600mhz clocks limit in ccc

[trt740]

Well with this bios my card does ddr5 5780 and well over 1000 core and the voltage and bios settings work for after burner. However if you want to wait that up to you. Basically this bios allow for software voltage control and clock speeds well in access of what you can reach stable on a 5770.

[High.K]

Indeed.

ik can run my 2 Asus HD5770 @ 1050/1200 @ 1.27v( if i bump the memory higher then i'am getting lower score's on benchmarks)

But i think cause its the referance design everbody can get the clocks en voltage control by using Afterburner 1.3
If not flash the Asus bios

[trt740]

Originally Posted by High.K

Indeed.

ik can run my 2 Asus HD5770 @ 1050/1200 @ 1.27v( if i bump the memory higher then i'am getting lower score's on benchmarks)

But i think cause its the referance design everbody can get the clocks en voltage control by using Afterburner 1.3
If not flash the Asus bios

Nope you need a unlocked bios to use one tool, voltage you can control but unless you have this bios the clocks are locked on the core at 960 you can subvert that with amd gpu tool but it's a pain in the ass. Also the ram on your cards must be bad because these cards use better ram than the 5870/5850 and should go allot higher than 1200.

[Riska]

I can go to 1110/1475 on my master card at 1.35v with Afterburner and amdclocktool and my cards are saphire

[trt740]

Originally Posted by Riska

I can go to 1110/1475 on my master card at 1.35v with Afterburner and amdclocktool and my cards are saphire

Thats great but I can do it without using two different tools, and it loads automatically. If you don't want the bios don't use it no one said you had to. However, someone else might want to. Also at 1.35v that not a stable clock with the stock cooler so you must be on water? The clocks I posted are occt stress test stable. At those clocks with the stock cooler your gpu will error out the azz at a heavy load.

[Theorw]

I need a SURE answer.I am waiting my 5770 tomorrow morning and i am looking forward to flashing it with the asus bios posted above.So is it SURE i wont turn out with a dead card and having to force flash it with the original bios or using DOA RMA ??I mean it will be reference CONNECT3D card so it wont have any problems right?

[Theorw]

And another question!After having found the OC limits of my card,can i flash it with OCed clocks or is it not yet compatible with RBE???

[trt740]

Originally Posted by Theorw

I need a SURE answer.I am waiting my 5770 tomorrow morning and i am looking forward to flashing it with the asus bios posted above.So is it SURE i wont turn out with a dead card and having to force flash it with the original bios or using DOA RMA ??I mean it will be reference CONNECT3D card so it wont have any problems right?

Well all the 5770 cards are reference and that bios is from my reference asus card so since your new card and mine would be physically identical there should be no problem.

Originally Posted by Theorw

And another question!After having found the OC limits of my card,can i flash it with OCed clocks or is it not yet compatible with RBE???

On this I'm not sure but as of now I believe RBE is not compatible. Also there is no need to do anything with the clock speeds since afterburner will save and preload any over clocking clocks and voltage you use.

[Riska]

The 1.35v are with the stock cooler at 100% and vantage stable for many times occt is not at tool i use and with the asus bios i cant set the voltage with afterburner or smartdoctor on all 4 cards but i can do that with stock bios thats wy i am not using the asus bios.

[pvhk]

Somes screens of gpu temperature with this voltage & speeds would be interesting to see if it's on stock air cooling!

[Theorw]

Originally Posted by trt740

Well all the 5770 cards are reference and that bios is from my reference asus card so since your new card and mine would be physically identical there should be no problem.

On this I'm not sure but as of now I believe RBE is not compatible. Also there is no need to do anything with the clock speeds since afterburner will save and preload any over clocking clocks and voltage you use.

Thanks dude!
About my 2nd question i get that i ll be able to load the clocks each time i play a game but i think that having set the values to the bios would be the best way to go since u avoid any program bug or something...that might happen!
I hope RBE will support these soon!
When i get my card tomorrow i ll run some benches on stock cooler and then i put the musashi on and see what it can do!

[trt740]

Originally Posted by Riska

The 1.35v are with the stock cooler at 100% and vantage stable for many times occt is not at tool i use and with the asus bios i cant set the voltage with afterburner or smartdoctor on all 4 cards but i can do that with stock bios thats wy i am not using the asus bios.

Vantage stable means zero. Thats not a accurate tool to test stability. Most of the time vantage stability doesn't translate at all to in game stability. Still nice benching clock.

[Riska]

I dont have a singel game in my house or on my pc i only use this pc for benching and the barebone for inet and news and pics will come later i am not at home right now

[SonDa5]

So are 2 of these in Xfire going to beat a single HD5850? I'm talking about over clocked for both configurations of course.

[trt740]

Originally Posted by Riska

I dont have a singel game in my house or on my pc i only use this pc for benching and the barebone for inet and news and pics will come later i am not at home right now

Can I ask really what is the point of your posts. This thread is to allow people who want a unlocked 5770 bios the opportunity to download it . If you don't want the bios that fine but please stop with this debate it irrelevant to this topic. I was trying to be helpful and post a unlocked bios. What is your deal? Most people actually use their computer to play games with this card and would like to get the most out of their card and need this bios to help get them there. Bottom line if you don't want the bios don't use it. Take your debate to the 5xxx series card discussion thread where it belongs. Here is the thread you want http://www.xtremesystems.org/forums/...d.php?t=233621. However, this is a unlocked bios thread , where you guessed it!!!!! you can download the one and only unlocked 5770 series bios. I realize Msi is going to be releasing one soon but until then that is what this thread is for.

[bhavv]

Thanks. Just flashed mine and I now have 1200 Mhz as the upper GPU limit in CCC.

This method is better then using AMD GPU tool, as it doesnt deactivate powerplay when overclocking above the default CCC limit, and AMD GPU tool isnt even working yet on these cards either.

[SocketMan]

Originally Posted by bhavv

AMD GPU tool isnt even working yet on these cards either.

You need the newest version:
0.9.26.0

http://downloads.guru3d.com/AMD-GPU-...load-2383.html
********************************************
THX for posting the Asus BIOS

[Theorw]

Does atiflash 3,75 support flashing 5770?

[bhavv]

Originally Posted by Theorw

Does atiflash 3,75 support flashing 5770?

Whichever one I just used worked, dont know which version as I have a dedicated ATIflash USB stick that I just stuck in, copied the bios onto and flashed

I had to do each one seperately though, and am uninstalling / reinstalling the drivers now.

[Theorw]

Cool thanks!I know it exist somewhere but can u point me in the article about creating a bootable USB STICK?
Thanks!