Everest 5.00 released!

[saaya]

http://www.lavalys.com/products.php?lang=en&page=37

This looks like a mayor update, check out all the new features :o

* Improved Hardware Monitoring module with Alerting feature
* Support for Intel Core i7, Intel Atom and AMD Phenom II processors
* Support for OpenGL 3.0 with OpenGL version compliancy test
* Support for Windows 7 and a new auto-load feature under Windows Vista
* Extended audio information: OpenAL and High Definition Audio pages
* New information page for installed Windows Vista Sidebar Gadgets
* GPGPU devices information for ATI Stream and nVIDIA CUDA

Keep up the great work fiery and everybody else at lavalys!

[redrumy3]

woohoo, it detects my ud3p board now too

[dinos22]

interesting

this should now report true i7 bandwidth

let's see it rip boys

[SNiiPE_DoGG]

sick, DLing now

[largon]

I like, love those Volterra VRM amperage readings.
Wish VRM manufacturers other than Volterra would provide current data...

[safan80]

seems no different than the beta build 4.60.1641 except for the new splash screen.... I wish it supported my motherboard better....

well it does load faster so that is a plus.

[D749]

I love this program. However, where was my email notification of this release!?!? I'm glad they fixed the latency issues that plagued the earlier betas.

[soundood]

wahey this is great news, and also my key for version 4.60 works on this version

thanks lavalyst

[BenchZowner]

Mmmmm nice.
Hope my current key works fine with the new version, because I'm bored to death and can't bother e-mailing Lavalys

[<<HANNIBAL>>]

will this version have a different numbers in Read Write Copy?
like it was with 4.2v and older ones

[naokaji]

and also my key for version 4.60 works on this version

WOOOT, I feared it woudn't work, but thats great news.

[Fiery]

I wish it supported my motherboard better

What kind of support are you looking for?

[Fiery]

will this version have a different numbers in Read Write Copy?
like it was with 4.2v and older ones

Benchmark results should only be compared with results obtained with the same EVEREST version. EVEREST itself warns you about that each time you run a benchmark.

[safan80]

What kind of support are you looking for?

I'd like to see the 12V and the 3.3V rails... it helps me with overclocking. I know software monitors are not accurate etc, but I like seeing when things are dipping. right now all I have is the 5V in everest. my Areca 1280ML raid controller can see the 12V and 3.3V rails, but it's kinda hard to use that in games.


I'm referring to the Gigabyte EX58-UD5 motherboard. The Evga X58 has this support in everest.

[SimonD]

Fiery, I just upgraded my license today due to the release of 5.00, I had been happy with 4.60 but my years upgrades ran out a few months ago. All I can say is Köszönöm

[Gunslinger]

Do we upgrade for free if say we have full version of 4.6?

edit: Yes, registration code for 4.6 validated version 5.0

[Z3R0-CooL]

what the helll?? that aint right......

[zanzabar]

What kind of support are you looking for?

since u asked, i would like the VTT voltage and fan RPM for fan1/2 for my blackops. that way i wouldent need agies panel for monitoring affter bios changes and i could just have everest to get a ball park voltage

[Loque]

what the helll?? that aint right......

something wrong there.. I'm getting 9333MB/s on that test, I only beat i7 on two tests

[Fiery]

I'd like to see the 12V and the 3.3V rails... it helps me with overclocking. I know software monitors are not accurate etc, but I like seeing when things are dipping. right now all I have is the 5V in everest. my Areca 1280ML raid controller can see the 12V and 3.3V rails, but it's kinda hard to use that in games.


I'm referring to the Gigabyte EX58-UD5 motherboard. The Evga X58 has this support in everest.

Your motherboard doesn't monitor +12V and +3.3V rails. You can verify that in the BIOS Setup (PC Health Status page).

[Fiery]

Fiery, I just upgraded my license today due to the release of 5.00, I had been happy with 4.60 but my years upgrades ran out a few months ago. All I can say is Köszönöm

Thank you for your support

[Fiery]

since u asked, i would like the VTT voltage and fan RPM for fan1/2 for my blackops. that way i wouldent need agies panel for monitoring affter bios changes and i could just have everest to get a ball park voltage

Can you see those readings in the BIOS Setup? If yes, then please submit a report to us in EVEREST / main menu / Report / Submit Report To Lavalys. Based on the submitted report and Sensor Dump we can tweak the sensor support for BlackOps.

BTW, in the case you're wondering, submitted reports do not contain any personal or software information, and they are only used for EVEREST development purposes.

[zanzabar]

ill get on that when i get home

[Z3R0-CooL]

there is seriously something wrong with it.. the higher the BLCK the less memory bandwidth ? wtf? at 200 BLCK i get only 9300MB/s read .. at 205 i get 9000MB/s....

[Don_Dan]

woohoo, it detects my ud3p board now too

The older 4.60 betas did that for over a month...

will this version have a different numbers in Read Write Copy?
like it was with 4.2v and older ones

That something that interested me too, I checked with my system some minutes ago and for me they are the same with 5.00 and the last 4.60 betas.



Thanks for releasing the new version of this great program!