SS + i965 Extreme + GA-EX58-UD5

[yotomeczek]

After hours in PCLab.pl ... two guys (yotomeczek and xoqolatl) tried to OC Nehalem CPU

Specs :
- MB: Gigabyte GA-EX58-UD5 (ASUS Rampage II Extreme didn't run properly )
- CPU: Core i7-965 Extreme Edition ES
- Mem: OCZ OCZ3P18002GK DDR3-1800MHz (3 x 1 GB), Corsair TR3X6G1600C8D DDR3-1600MHz (3 x 2 GB), Corsair TWIN4X2048-1800C7DF (2x 1 GB), and one OCZ DDR3 1800 (to match triple channel with two Corsairs)
- SS: evap IDLE -66 degrees and -56 when LOAD with Pi (wPrime was to hard to keep temp below -40 )
- PSU: Tagan 1300W

You know the Gigabyte GA-EX58-UD5, socket area is unpossible to insulation. So xoqolatl took off part of the LGA1366 socket




Now it's much better

Our SS

Temp in SuperPi action

Workplace


CPU we get in hands wasn't briliant when we talk about OC
But it wasn't so bad.
Max screen:

And ... max SuperPi

Best 1M in Poland (I suppose)

16M (with higher clock time was worse )

32M Nice performace/clock

32M max


Of course we have a few problems but Nehalem OC is very exciting
BTW we tested in PCLab.pl 7 motherboard LGA1366 (Intel X58) - You can see the charts at least

[StrangerS]

Wow Nice result

[giorgos th.]

what did you use for insulation of the socket?use some rubber and it`s piece of cake...

[yotomeczek]

Wow Nice result

THx
Some charts from 7 x Intel X58 test:

Max BCLK - OCCT tested 10 minutes (5MHz step, 1.45V Vcore and 1.45V Vtt, 1.75V Vmem):


And max CPU (1,45V Vcore set in BIOS and 1.45V Vtt, 1.75V Vmem)


Vcore set and real (set 1.45V in BIOS, taken from CPU-Z, pink is load, blue is IDLE):


More info here

[yotomeczek]

what did you use for insulation of the socket?use some rubber and it`s piece of cake...

Nice
Is it easy to remove ?
We used to use a sheet of armaflex (about 9mm thick)

[StrangerS]

Push it up @ 5Ghz. Yotomeczek

[yotomeczek]

Push it up @ 5Ghz. Yotomeczek

Maybe net time with another CPU and another mobo
It's strange (after some E8x00 and other Intel CPU OC experience) that with Nehalem it's not big different between 1M stable and 32M stable ... SS screen is about the same as Pi stability.

[Oldscarface]

Maybe net time with another CPU and another mobo
It's strange (after some E8x00 and other Intel CPU OC experience) that with Nehalem it's not big different between 1M stable and 32M stable ... SS screen is about the same as Pi stability.

Nice results there , I had the same conclusion.
Or there is more in the cpu or the diffences between Superpi 1m and 32m is almost nothing. Difference here is only about 50Mhz.

[FatAlbert]

very nice yoto

did think about ln2 session ?

[giorgos th.]

Nice
Is it easy to remove ?
We used to use a sheet of armaflex (about 9mm thick)

very easy to apply,easier to remove and it doesn`t leave any "evidence"...

[Crazystang01]

giorgos th. Where can some one fine this rubber at for insulation got a name link? by chance?

[yotomeczek]

very nice yoto

did think about ln2 session ?

Yeeeeeeeeesssssss ...
Maybe first we try DI

[FatAlbert]

guys think about 3d too

[bedlamite]

We thought about that, but 3rd GTX 280 died
2 weeks left till Deneb samples

[yotomeczek]

Insulation - after party photos
xoqolatl did profi job

[bartx]

Nice results man, but I want to see some LN2 action or at least DI

[crustytheclown]

You definately have to bench @ln2.This cpu is screaming for some 5Ghz action.Great results man

Crazystang01 here is your link http://www.amazon.com/Focus-Large-Kn.../dp/B001BYK7PC

[hicookie]

Nice work,buddy
here is my UD5, also i tookoff the ILM

[G.Foyle]

Nice idea with capacitors on the back side. Did you add the 3 caps, or just moved them from the front to the back?

[Crazystang01]

Thanks for the link for the insulation.

[phobosq]

Nice job, yoto, I missed your pclab review, makes me wanna go to llok for it

[Pitbull]

Nice indeed. good Job. Wish i could hangout and see you guys in action next time i visit homeland

[dinos22]

ive done this to mine as well
its perfect