Iandh Silver Coils

[NaeKuh]

I know you guys are jealous.



*need to find some tubing to stick this into for pictures*

i'll post it tomorrow.

But oh so sexy.

[AndrewZorn]

How much?

[NaeKuh]

How much?

dun know, iandh knows me fairly well, so my price is different from everyone's

i should write the words ario at the end.

[AndrewZorn]

Can I pay with my 1oz silver bar I bought during reading the thread in which this thing was later conceived?

[NaeKuh]

Can I pay with my 1oz silver bar I bought during reading the thread in which this thing was later conceived?

im sure its gonna be less then that. Its just a simple coil.

[septim]

hmm add in reference material for size estimate... is that designed to fit in an EK multi-option res?

[AndrewZorn]

It goes in the tubes.

[003]

It goes in the tubes.

Seems to me like that may impact flow.... it looks nice but I think the idea of sticking a thin silver wire in your res would have much less performance impact.

[MomijiTMO]

And if it moves . . . .

Corkscrew remover? Hey I just want to stick it up my nose and see what happens?

[xTKxhom3r]

if it moves it cant really go anywhere.... lol its not like its going to get into your block there is no way...

and i doubt it will impact performance

[MomijiTMO]

I'm sorry lol, I WANT IT TO TWIRL in the water you see. Now someone do it for me

[Serpentarius]

imo .......... it'll be a lot attractive if there is scribbling engraved on the coils itself ... dont you think so?

preferably cut-in scribblings ... more awesome

[AndrewZorn]

I don't think this one is meant for looks/bling. It should be CHEAP and a good way to safely run pure distilled only. If you think this will impact performance, I hope you don't have any bends in your tubing.

[YugenM]

imo .......... it'll be a lot attractive if there is scribbling engraved on the coils itself ... dont you think so?

preferably cut-in scribblings ... more awesome

As awesome as that may be, are you going to be staring at a silver coil in the watercooling loop in your computer, or are you going to be staring at the screen?

[NaeKuh]

I'm sorry lol, I WANT IT TO TWIRL in the water you see. Now someone do it for me

ROFLROFL.... i dont know if i can do that. Its ment to lock on the tubing or at the barb. But you can strech it out, its fairly maluable. <i think i butchered that spelling>

imo .......... it'll be a lot attractive if there is scribbling engraved on the coils itself ... dont you think so?

preferably cut-in scribblings ... more awesome

UV etch it so it looks like this?



hey that might be cool.

[Kibbler]

UV etch it so it looks like this?

hey that might be cool.

Oh hell yes that's the 1st thing that came to mind. One true loop indeed

[T_Flight]

I had an idea for what that could be used for, but I won't post that here.

Anyhow, how many of these things would be recommended? Like one at the inlet to the res and maybe one at the inlet to the rad or something or would one be sufficient?

Would PT Nuke react with the silver in any way? Remember there is a new forumla now.

[AndrewZorn]

The point is to eliminate the need for PT Nuke.

EDIT but I guess everyone is just looking for blingy curly things to spend money on.

[cobra_kai]

One ring to rule them all, one ring to find them, one ring to bring them all, and in the darkness bind them.

Got to love a good lord of the rings reference

[NaeKuh]

One ring to rule them all, one ring to find them, one ring to bring them all, and in the darkness bind them.

Got to love a good lord of the rings reference

one ring to kill it all

its anti microb.

Anyhow, how many of these things would be recommended? Like one at the inlet to the res and maybe one at the inlet to the rad or something or would one be sufficient?

i dont think you need much at all, that one loop should be enough cuz of how silver works.
The ions stay in solution, so that ring over time gets eatten. As your coolant ages, the concentration of silver increases, and hence it gets stronger.

Get it?

[T_Flight]

one ring to kill it all

its anti microb.



i dont think you need much at all, that one loop should be enough cuz of how silver works.
The ions stay in solution, so that ring over time gets eatten. As your coolant ages, the concentration of silver increases, and hence it gets stronger.

Get it?

Yep, I'm with 'ya. As long as that thing lasts 3 months it'll be enough for me. If it lasts longer great, but I'll be pulling my loops down every 3 months at least to make sure everything is good. It should be but I wanna keep a check on things just for that warm fuzzy feeling that everything is still shiny in there.

Aw, and to make sure I got that dang flux out. I've heard the HW Labs are a little easier to clean, but I'm new, and wanna make sure I really did get it all. I used alot of boiling distilled water and flushed it, but one can never be 100% certain. We'll see when I get it all running.

[Petra]

I used alot of boiling distilled water and flushed it, but one can never be 100% certain. We'll see when I get it all running.

I ended up getting pretty annoyed with my PA160 and just poured condenser cleaner into it... it's super clean in there now but probably wasn't the most intelligent thing to do (the scent of the stuff that Steve gave me is reminiscent of sulfuric acid).

[Serpentarius]

UV etch it so it looks like this?



hey that might be cool.

yeah .... it's possible!!! maybe something like this?

[Eddy.Jones]

yeah .... it's possible!!! maybe something like this?

wow what is that.. that is an impressive effect.

[hellcamino]

Pretty neat idea, are those trimmings from using a bench shear?