XtremeSystems Forums

Go Back   XtremeSystems Forums > Hardware > Intel

Reply
 
Thread Tools Rate Thread Display Modes
Old 10-01-2008, 02:17 PM   #1
pmp
Xtreme Member
 
pmp's Avatar
 
Join Date: Aug 2006
Location: WAW,PL
Posts: 294
Smile ASUS P6T family - all about it.

Hence the design would not be changed anymore, i decided to create dedicated P6T-series thread. Next models to come:

-P6T Deluxe (without OC Palm)
-P6T WS Professional
-P6T WS Revolution

I bet specs are know, just to mention SLI solution is avaliable through licensed BIOS, SAS controller is a software one, but still it would be a nice base for upcoming i7 based PCs.

More P6T series are of course on the way, as soon as they would be ready - i would update the thread.

BIOS shots / performance shots p: - i will post them soon, now comparing to some other non ASUS branded X58 board... guess which

I will measure mounting holes for MCH/SB/FETs as this info maybe usefull in close future.

Some voyeurs below.







Within my free time i would post some performance shots with i7 920 and i7 965 Extreme.
__________________
skulltrail | quadsli | 15K.6 | 30" | desktops are baaad!

Last edited by pmp; 10-04-2008 at 05:17 AM.
pmp is offline   Reply With Quote
Old 10-01-2008, 02:38 PM   #2
vcp-cur
Xtreme Member
 
Join Date: Dec 2007
Posts: 304
i have that motherboard sitting here
vcp-cur is offline   Reply With Quote
Old 10-01-2008, 03:31 PM   #3
DonInKansas
Xtreme Member
 
DonInKansas's Avatar
 
Join Date: Sep 2008
Posts: 118
Send a message via AIM to DonInKansas Send a message via MSN to DonInKansas Send a message via Yahoo to DonInKansas
Just a cool looking NB. Do want!
DonInKansas is offline   Reply With Quote
Old 10-01-2008, 08:22 PM   #4
mikeyakame
Xtreme Addict
 
mikeyakame's Avatar
 
Join Date: May 2008
Location: Land of Koalas and Wombats
Posts: 1,055
Does the black 16x slot run off the ICH or the NB, if it runs off the NB does it support PCI-E 2.0?
__________________

DFI LT-X48-T2R UT CDC24 Bios | Q9550 E0 | G.Skill DDR2-1066 PK 2x2GB |
Geforce GTX 280 729/1566/2698 | Corsair HX1000 | Stacker 832 | Dell 3008WFP

mikeyakame is offline   Reply With Quote
Old 10-01-2008, 08:36 PM   #5
Nasgul
Xtreme Enthusiast
 
Nasgul's Avatar
 
Join Date: Mar 2005
Location: Strive for peace w/Acts of War
Posts: 870
Oh!! Geesush!.......

What's with ASUS putting VIA crap chips on their boards lately?

I mean, I was going to go quad and pair it with the Maximus II but when I saw a VIA chip in there? I ran for the hills..........oh well, I guess I'm gonna stay in the P5B-Deluxe (VIA crap free ) hills for a lot longer than I thought.

Nice board overall........9.5 out of 10, I'd be an 11 "IF" it didn't have that crap I just talked about.
__________________
ASUS P5B Deluxe P965 BIOS 1236 | Intel Core 2 Quad Q6600 G0 8MBL2 @ 3.15GHZ | G.Skill DDR2 800 F2-6400PHU2-2GBHZ & XTreem DDR 800 D9GMH - 4GB RAM Total | 4:5 Ratio @ 350fsbx9 | Tuniq Tower 120 | BFG GeForce 9800GTX | Seagate 2x 250GB Perpendicular HDDs RAID-0 | PC Power & Cooling Silencer 750W EPS12V | Samsung TOC T240 24" LCD Monitor |
Nasgul is offline   Reply With Quote
Old 10-02-2008, 06:30 AM   #6
Chri$ch
Xtreme Enthusiast
 
Chri$ch's Avatar
 
Join Date: Nov 2005
Location: Germany
Posts: 988
@ pmp

can you say something about the price?

Thanks
Chris
Chri$ch is offline   Reply With Quote
Old 10-02-2008, 06:48 AM   #7
Mats
Xtreme Enthusiast
 
Join Date: Aug 2004
Location: Sweden
Posts: 967
Nasgul: That VIA chip is a Firewire controller, what's wrong with it?
I never use FW anyway so I couldn't care less, just disable it in BIOS.
Mats is offline   Reply With Quote
Old 10-02-2008, 06:59 AM   #8
NBF
Xtreme 3D Team
 
NBF's Avatar
 
Join Date: Mar 2007
Location: Rio de Janeiro, Brazil
Posts: 403
Nice pictures pmp! Waiting for BIOS shots

Could you please send me one of those boards?
__________________
NBF is offline   Reply With Quote
Old 10-02-2008, 07:06 AM   #9
pmp
Xtreme Member
 
pmp's Avatar
 
Join Date: Aug 2006
Location: WAW,PL
Posts: 294
Quote:
Originally Posted by Chri$ch View Post
@ pmp
can you say something about the price?
Thanks
Chris
For today - unfortunately not. More to come around November.
__________________
skulltrail | quadsli | 15K.6 | 30" | desktops are baaad!
pmp is offline   Reply With Quote
Old 10-02-2008, 07:14 AM   #10
loc.o
Xtremely Addicted
 
loc.o's Avatar
 
Join Date: Dec 2004
Location: NL
Posts: 2,268
Send a message via MSN to loc.o
Thanks for sharing m8
__________________

loc.o is offline   Reply With Quote
Old 10-02-2008, 01:24 PM   #11
Skyline GT-R
Xtreme Member
 
Skyline GT-R's Avatar
 
Join Date: Apr 2005
Location: Belgium
Posts: 292
Send a message via MSN to Skyline GT-R
That'll be my next board for sure!
__________________
intel Core 2 Duo E6600 @ 8x400MHz
Asus P5E X38 bios 1201
Corsair TWIN2X2048-6400 x2 4GB in total
eVGA Geforece 9800GTX+ || Creative Audigy 2 ZS
Adaptec AAR1430SA 4port Raid card
Seagate Barracuda 7200.10 160GB 8MB SATA2 x2 (RAID0, OS drive) on Adaptec
Seagate Barracuda 7200.10 250GB 8MB SATA2 x2
Seagate Barracuda 7200.11 500GB 32MB SATA2
Seagate Barracuda 7200.11 1000GB 32MB SATA2
Seagate Barracuda 7200.11 1500GB 32MB SATA2 x4
Coolermaster CM 690 || Corsair CMPSU-520HX
Windows 7 Ultimate RTM x64
Philips 200WB7ES 20" WS 1680x1050

MacBook Pro 15" June 2009
iPhone 3GS 16GB
Skyline GT-R is offline   Reply With Quote
Old 10-04-2008, 03:09 AM   #12
pmp
Xtreme Member
 
pmp's Avatar
 
Join Date: Aug 2006
Location: WAW,PL
Posts: 294
BIOS shots:










OC Palm shots:




With extreme CPU both multipliers, voltages could be set via this device. Kinda convinient, usage is very simple.
Not sure if OC Palm software running in the OS background would have any impact on results though.

Some results WinXP SP3 clean install without _any_ single tweaks. Notice dual channel instead of triple, due to my lack of more DDR3 modules at this moment
Lavalys Everest memory performance (dual-channel)

SuperPI 1.5 XS without single tweak
/1989/everestwriteac3.th.png[/IMG][/url]
Cinebench R10
__________________
skulltrail | quadsli | 15K.6 | 30" | desktops are baaad!

Last edited by pmp; 10-04-2008 at 05:13 AM.
pmp is offline   Reply With Quote
Old 10-04-2008, 03:48 AM   #13
Monstru
Xtreme Addict
 
Monstru's Avatar
 
Join Date: Jan 2007
Location: Romania, lab501.ro
Posts: 1,151
Send a message via MSN to Monstru Send a message via Yahoo to Monstru
Great looking boards and very usefull info, thx pmp!
__________________
Weissbier - breakfast of champions

DDR3 2754 8-9-8-24

Monstru is online now   Reply With Quote
Old 10-04-2008, 04:25 AM   #14
Chri$ch
Xtreme Enthusiast
 
Chri$ch's Avatar
 
Join Date: Nov 2005
Location: Germany
Posts: 988
Thanks for the Pics pmp, but only 2 different memory multipliers and no qpi multiplier?
Chri$ch is offline   Reply With Quote
Old 10-04-2008, 06:14 AM   #15
pmp
Xtreme Member
 
pmp's Avatar
 
Join Date: Aug 2006
Location: WAW,PL
Posts: 294
So far... yes.
__________________
skulltrail | quadsli | 15K.6 | 30" | desktops are baaad!
pmp is offline   Reply With Quote
Old 10-04-2008, 06:19 AM   #16
mikeyakame
Xtreme Addict
 
mikeyakame's Avatar
 
Join Date: May 2008
Location: Land of Koalas and Wombats
Posts: 1,055
I thought Intel unlocked the QPI/DRAM multiplier on all chips now? Or was this an earlier ES chip?
__________________

DFI LT-X48-T2R UT CDC24 Bios | Q9550 E0 | G.Skill DDR2-1066 PK 2x2GB |
Geforce GTX 280 729/1566/2698 | Corsair HX1000 | Stacker 832 | Dell 3008WFP

mikeyakame is offline   Reply With Quote
Old 10-04-2008, 06:19 AM   #17
Chri$ch
Xtreme Enthusiast
 
Chri$ch's Avatar
 
Join Date: Nov 2005
Location: Germany
Posts: 988
i hope this will be fixed with the next bios or if the mainboard is available...
Chri$ch is offline   Reply With Quote
Old 10-04-2008, 06:33 AM   #18
mikeyakame
Xtreme Addict
 
mikeyakame's Avatar
 
Join Date: May 2008
Location: Land of Koalas and Wombats
Posts: 1,055
By the looks of the bios it seems the scope of voltage monitoring is limited to vCC and transformed PSU supply voltages? Seems like waiting for the RIIE board will probably be the way to go. The added adjustment of DIMM data/clock ref voltage per channel is a neat feature though! So many more memory timings to figure out as well! It's good to see there is finally an option to change tFAW which will surely come in handy with some ICs.

pmp, do you happen to know what DD stands for? Different Dimm perhaps? DR and SR are standard but never come across DD.
__________________

DFI LT-X48-T2R UT CDC24 Bios | Q9550 E0 | G.Skill DDR2-1066 PK 2x2GB |
Geforce GTX 280 729/1566/2698 | Corsair HX1000 | Stacker 832 | Dell 3008WFP


Last edited by mikeyakame; 10-04-2008 at 06:35 AM.
mikeyakame is offline   Reply With Quote
Old 10-04-2008, 06:46 AM   #19
zlojack
Xtreme Addict
 
zlojack's Avatar
 
Join Date: Nov 2007
Location: Toronto, Canada
Posts: 1,491
Wow...nice stuff!

That board is really packed.

Hardly any space left.
__________________
RIG 1 (in progress):
Core i7 920 @ 3GHz 1.17v (WIP) / EVGA X58 Classified 3X SLI / Crucial D9JNL 3x2GB @ 1430 7-7-7-20 1T 1.65v
Corsair HX1000 / EVGA GTX 295 SLI / X-FI Titanium FATAL1TY Pro / Samsung SyncMaster 245b 24" / MM H2GO
2x X25-M 80GB (RAID0) + Caviar 500 GB / Windows 7 Ultimate x64 RC1 Build 7100

RIG 2:
E4500 @ 3.0 / Asus P5Q / 4x1 GB DDR2-667
CoolerMaster Extreme Power / BFG 9800 GT OC / LG 22"
Antec Ninehundred / Onboard Sound / TRUE / Vista 32

Last edited by zlojack; 10-04-2008 at 06:49 AM.
zlojack is offline   Reply With Quote
Old 10-04-2008, 08:12 AM   #20
pmp
Xtreme Member
 
pmp's Avatar
 
Join Date: Aug 2006
Location: WAW,PL
Posts: 294
Quote:
Originally Posted by mikeyakame View Post
By the looks of the bios it seems the scope of voltage monitoring is limited to vCC and transformed PSU supply voltages?
Yes indeed. Basic information only, but TurboV shows more (under OS).
Quote:
Originally Posted by mikeyakame View Post
Seems like waiting for the RIIE board will probably be the way to go. The added adjustment of DIMM data/clock ref voltage per channel is a neat feature though! So many more memory timings to figure out as well! It's good to see there is finally an option to change tFAW which will surely come in handy with some ICs.
It should've been avaliable (or it was actually but not user-adjustable) alread y on older boards. IIRC it was for high-density modules mainly, though may impact the performacne/OCbility of RAM modules. Correct me if i'm wrong.
Quote:
Originally Posted by mikeyakame View Post
pmp, do you happen to know what DD stands for? Different Dimm perhaps? DR and SR are standard but never come across DD.
Not really, haven't figured it out yet.
Quote:
Originally Posted by mikeyakame View Post
I thought Intel unlocked the QPI/DRAM multiplier on all chips now? Or was this an earlier ES chip?
At least for i7 965 Extreme - yes, more multi's are available. But regular i7 ? We have to wait for anybody with C0+ stepping to see if all are available too.
__________________
skulltrail | quadsli | 15K.6 | 30" | desktops are baaad!

Last edited by pmp; 10-04-2008 at 08:17 AM.
pmp is offline   Reply With Quote
Old 10-04-2008, 11:39 AM   #21
pmp
Xtreme Member
 
pmp's Avatar
 
Join Date: Aug 2006
Location: WAW,PL
Posts: 294
Those are available _potential_ very _theoretical_ memory speeds when i7 965 Extreme CPU is being used.



Chinese fancy imagination :-)
And some better/bigger scores :-)



Wondering how far it can goes. The rally FTW begins

__________________
skulltrail | quadsli | 15K.6 | 30" | desktops are baaad!

Last edited by pmp; 10-04-2008 at 03:09 PM.
pmp is offline   Reply With Quote
Old 10-04-2008, 04:03 PM   #22
Booj
Xtreme Member
 
Booj's Avatar
 
Join Date: Aug 2006
Location: Adelaide, Australia
Posts: 241
Nice bus speed. over 200mhz looks good for the lower chips getting 4ghz+
__________________
Booj is offline   Reply With Quote
Old 10-04-2008, 04:09 PM   #23
mariniam
Registered User
 
mariniam's Avatar
 
Join Date: Sep 2006
Location: Athens, Greece
Posts: 62
Send a message via MSN to mariniam
The Core i7 920 on stock did 1m superpi in 15sec, this is good, right? my q6600 does 21 sec on stock! How fast does an e8400 do 1m?
mariniam is offline   Reply With Quote
Old 10-04-2008, 04:31 PM   #24
Bullet92
Xtreme Enthusiast
 
Bullet92's Avatar
 
Join Date: Dec 2007
Location: Croatia
Posts: 610
Send a message via MSN to Bullet92
Quote:
Originally Posted by mariniam View Post
The Core i7 920 on stock did 1m superpi in 15sec, this is good, right? my q6600 does 21 sec on stock! How fast does an e8400 do 1m?
About 15.500s. i7 is way faster even with 300MHz lower clocks
__________________


MBO Gigabyte MA790FXT-UD5P // CPU Phenom II 955 BE //
GPU 8800GT 512MB // PSU CoolerMaster Real Power 450W - fan moded //
RAM 2*1GB Ballistix 1800MHz // HDD 160GB Hitachi + Seagate 250GB (410AS)
Bullet92 is offline   Reply With Quote
Old 10-04-2008, 05:34 PM   #25
fornowagain
Xtreme Addict
 
fornowagain's Avatar
 
Join Date: Nov 2005
Location: UK
Posts: 1,064
Send a message via MSN to fornowagain
Quote:
Originally Posted by Chri$ch View Post
can you say something about the price?
Asus P6T Pre-order in the UK, £252. £282 for the Palm edition.

http://www.overclockers.co.uk/showpr...%20Motherboard
__________________

i7 940 | EX58-EXTREME | 6GB Corsair | SSD M225 | Radbox | 5870 CF
fornowagain is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 02:40 PM.


Powered by vBulletin® Version 3.7.6
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
XtremeSystems