Please teach me the way of the 4850 bios mod

[drizzt5]

I've got a asus 4850 sitting at my front door. I want to flash the bios using this

I have modded sapphire Bios, GPU Core upper limit to 850MHz, memory upper limit to 1300MHz. You can download here. Try and Good luck!


I - HD4850 Bios (Modded by Leonarderman).

1. Sapphire HD4850 Hard Overclocked. DF Core 750MHz Mem 1100MHz Auto Cool Fan.
GPU Core upper Limit 850MHz
Memory Upper limit 1300MHz
Vcore Modded to 1.327V for higher Overclocking.

Sapphire HD4850 Hard Overclocked


2. Sapphire HD4850 Light Overclocked. DF Core 700MHz Mem 1000MHz Auto Cool Fan.
GPU Core upper Limit 850MHz
Memory Upper limit 1300MHz
Vcore DF 1.12V

Sapphire HD4850 light Overclocked



3. Asus HD4850 Light Overclocked. DF Core 700MHz Mem 1100MHz Auto Cool Fan.
GPU Core upper Limit 1200MHz
Memory Upper limit 1400MHz
Vcore DF 1.12V

Asus HD4850 Light Overclocked


4. Sapphire HD4850 Toxic. DF Core 675MHz Mem 1150MHz Auto Cool Fan.
GPU Core upper Limit 700MHz
Memory Upper limit 1200MHz
Vcore DF 1.12V

Sapphire HD4850 Toxic



Please note: Updating by ATIFlash 3.6 or newer (Dos), you can try to use ATI WinFlash, but I don't care!

I guess the Asus one.

But what do I do? And what do I need? I've never done this before, heh but I would like to get 800 core eventually! If not with the bios flash then with a pencil mod, but I don't have a DMM.

[leonarderman]

I've got a asus 4850 sitting at my front door. I want to flash the bios using this


I guess the Asus one.

But what do I do? And what do I need? I've never done this before, heh but I would like to get 800 core eventually! If not with the bios flash then with a pencil mod, but I don't have a DMM.

You should create an USB Bootable to Dos. You can make it from the guide here:

http://www.thepcspy.com/read/bootable_usb_flash_drive

Then you have to copy ATIFlash programs 3.6 (download below) or newer (Dos) and Bios file to USB Disk. Try it done!

http://www.techpowerup.com/downloads...lash_3.60.html

[drizzt5]

Cool, Thanks!

So after I make this USB boot disc, and boot from it, Is it just going to take over and do the work for me? And after I am done, should I use CCC to check it?

[drizzt5]

bump i'm trying it now...

Err, I'm stupid I set the USB boot priority to 1 after following that tutorial. Do I put the ati flash + bios and stuff in the dos folder too? Or do I have all this seperate stuff in one folder and then use that hp format tool?


NVM i got it, thanks alot for your hard work dude, your the man!

My problem was I needed to type this

atiflash -f -p pe.bin

^^ I changed the bios name to pe to make it easier for me, but my problem was i needed to force it I guess with -f.

THANKS ALOT!



<3

[vengance_01]

You will hit a wall around 710-730 on @1.21 vcore. For anything eles you must mod or pencil mod your card.