G.Skill DDR3-1600 CL7 GBHZ - broke 13.1K in EVEREST read....!!!
Looked around here but didn't find too much about this RAM.
For me the best sticks I ever owned - CAS 7, tRFC 60 & 1T is no problem even above 950Mhz speed in dual channel, this shot is done with 1.94 Vdimm(BIOS):
And they're much cheaper than many other brands................
So what's Your experience with it?
Last edited by camouflage; 06-17-2008 at 01:38 PM.
Keep pushing it... If the IC's are GTR on them (easy to remove and remount heatspreader, no danger in doing so as they use some thin thermaltape)
Then you can get 15GB/s without much trouble
I'll go for 16.5GB/s later this week
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
excellent touchits D9GTR or D9JNL?
nice score!
my new kit arrived today. i took a photo of chips on it. they are GTS!
Nice bench , what kind of cooling are u using for the 22c idle :-)
2600K working in 4.8 GHZ so far
2600k @(4600
Asus B2 mobo
4 GiG DDR 2400 MHZ
GTX 570 @ 1.063v ( 910/1820/2001 Mhz) .(under water).
1020 W PSU
Hobie's : Overclocking .... Overclocking .... Overclocking
Nice run!
I can't wait to see what my 2x2GB kit can do!
My benching has been put on hold until I get some D5 brackets, CPU is getting far too hot under air cooling for how I am pushing my benches.
Thx for sharing camouflage.
Great work as always
¨What is the text on the left side of them ?Originally Posted by jugeen
nice score!
my new kit arrived today. i took a photo of chips on it. they are GTS!
5KG5 or ?
excellent touchDidn't remove the spreader yet, but according to the Vdimm I guess it's D9JNL.
Just receaved mine from MemoryC.Com and they are 8AB12 D9GTSThx for sharing camouflage.
Great work as always
¨What is the text on the left side of them ?
5KG5 or ?
58ZR is the number on the side of the first BGA chip.
the other 7 have 5HG5 on them
Ahhh both of them are 8AB12 D9GTS and I got them for around 140 Euro while they cost about 350 Euro here in Denmark
EDIT: Heres a link if anybody wants some
http://www.memoryc.com/computermemor...0hzseries.html
I was told they where changing to D9JNL and and expected it because of the price. Now Im happy though
Last edited by Nosfer@tu; 06-18-2008 at 01:32 AM.
i am at work now, will check it at homeThx for sharing camouflage.
Great work as always
¨What is the text on the left side of them ?
5KG5 or ?
You propperly have the same
But would be nice to know.
so some are jnl some are gts hmmm is there no batch code to see which is which?
nice results camou, def nice! and the price of this gskill kit is quite low... sounds like a really nice deal
so some are jnl some are gts hmmm is there no batch code to see which is which?
nice results camou, def nice! and the price of this gskill kit is quite low... sounds like a really nice deal
yes...Gskill is cropping price with twice performance
yes...Gskill is cropping price with twice performance
as always
as always
Check ?
Takes you 2 min and only 1 sticker to move a bit with knife.
It can open like abread box
In advance, sorry for spelling and grama mistakes, its 3:18 AM, I've just had "dinner", and Im tired as hell!
Eventhough Im on vaccation, I had to check up on matters last morning...
The PC12800 HZ series are made with GTS atm, 2 and 4GB kit.
Please guy; no its not possible to know which IC is being used on G.Skill...
As for the thermal paste... 2GB is single sided, thats why its a bit harder to get one side off, but why doing so, what is there to gain...
Unless you apply pressure on top of ram (such as DICE cooling etc.) you can simply open the heatspreader by removing the two clips and one side will almost fall off..
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
please tell me the ram you are talking about is this one http://www.newegg.com/Product/Produc...82E16820231185 if it is im buying 4 gigs!!!
Nope, this is what they are talking about. When I bought it from the egg like a month ago, it was like $249. It did 1800 7-7-7-18 with 1.90 no sweat. I am waiting for the 4870 results to come out so that I can decide going blackops or dreadnought.
i7 Rigs
Mobo:EVGA Classified/Foxconn BR
CPU:W3540/i7 920(D0)
RAM: Dominator GT 2000 cl7/Patriot DDR3-2000 cl8
GPU:Sapphire 4870x2/XFX 4890/ GTX 260 tri-sli
Lappy:
Late 2008 "Unibody" MBP 2.4 GHZ(with OCZ Vertex 250GB)
aww those are expensive haha anyone know how the ones i posted perform?
:P :P :P
if there are cheaper and more expesive ones, then the cheaper ones are most likely jnl and the more expensive ones gts, easy as that
id go for jnl as i dont mind having trp and trcd 1 clock higher than with gtr/gts, its not worth the extra money imo... plus from what ive seen gskill seems to bin their jnl kits really well, they all seem to hit 1850 cas7 easily.
nice thanks for the info bro then ill get those cheaper ones i posted:P :P :P
if there are cheaper and more expesive ones, then the cheaper ones are most likely jnl and the more expensive ones gts, easy as that
id go for jnl as i dont mind having trp and trcd 1 clock higher than with gtr/gts, its not worth the extra money imo... plus from what ive seen gskill seems to bin their jnl kits really well, they all seem to hit 1850 cas7 easily.
Posting Permissions
Reply With Quote
Bookmarks