he he he, after some more tinkering, look at my load temps!!! i think am just gonna run this 24/7 because the temps are so low, doesnt even break 50C with a voltage of 1.57 Volts. idle is 23C, Ambient is 21C...he he he am happy now. if the Q6600 dies from running 1.57V 24/7, then it an excuse to get the Q9550!!
Nice. GPU on water too?
Dark Star IV i5 3570K | Asrock Z77 Extreme4 | 8GB Samsung 30nm | GTX 670 FTW 4GB + XSPC Razer 680 | 128GB Samsung 830 Apogee HD White | 140MM UT60/120MM UT45/120MM ST30 | XSPC D5 V2
It wont die
U are more temp limited then V limited
System: E8400 // P5Q-E // Ballistix // HD3850 // HX520 http://valid.x86-secret.com/show_oc.php?id=419486
Thermochill pa120.3 // D-tek FuZion bowed+ costum nozzle // MCW60 // EK150 // dcc1 18w w/top
Nice, whats ur speed? I get to 70C easily with 1,35V lol... even though I got the Apogee GTX
Some CPUs are just too hot to be cooled by water - that's why I'm getting a SS now
what do u use to get them cool temps?
very nice indeed
Gigabyte EP45-UD3P Bios f7
q9550 @ 4.1Ghz
Crucial Ballistix PC6400 4-4-4-12 2.2v @ 483mhz
Water Cooling
CPU Loop: DCC 3.2 + XSPC RES Top -> PA 120.3 -> apogee GT
GPU Loop: DCC 3.2 + XSPC top -> EK Full block 8800GT -> MCR320 ->Switch Reservoir Rev. 2
what you running it @?
Originally Posted by skinnee
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
u cant read his cpu-z?
445x9 = 4005.2mhz
Gigabyte EP45-UD3P Bios f7
q9550 @ 4.1Ghz
Crucial Ballistix PC6400 4-4-4-12 2.2v @ 483mhz
Water Cooling
CPU Loop: DCC 3.2 + XSPC RES Top -> PA 120.3 -> apogee GT
GPU Loop: DCC 3.2 + XSPC top -> EK Full block 8800GT -> MCR320 ->Switch Reservoir Rev. 2
kool what are you cooling this with?
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
he must running his 6600 @ -c place
inside the refrigerator? lol
Gigabyte EP45-UD3P Bios f7
q9550 @ 4.1Ghz
Crucial Ballistix PC6400 4-4-4-12 2.2v @ 483mhz
Water Cooling
CPU Loop: DCC 3.2 + XSPC RES Top -> PA 120.3 -> apogee GT
GPU Loop: DCC 3.2 + XSPC top -> EK Full block 8800GT -> MCR320 ->Switch Reservoir Rev. 2
21c ambient he rekons...
temps are very good for that ambient and them speeds....
how are you measuring ambient mate??
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
I see 1.57v reading on the CPU core in Everest. That means the Bios is set a wee bit higher.
What is your CPU's Voltage set to in the BIOS?
I am glad I found another member willing to go higher than I did, and CPU lived! I stopped at 1.55v BIOS. Your settings makes me think I could go higher if I wanted to...
So far With the Maximus and my Q6600 GO:
My CPU Voltage setting of 1.46250v (BIOS), will allow error free Priming with a FSB Frequency 414 giving me 3.7GHz with my 400 NB Strap.
My CPU Voltage setting of 1.506v (BIOS), will allow error free Priming with a FSB Frequency 424 giving me 3.81GHz with my 400 NB Strap.
My CPU Voltage setting of 1.51875v (BIOS), will allow error free Priming with a FSB Frequency 428 giving me 3.85GHz with my 400 NB Strap.
My CPU Voltage setting of 1.51875v (BIOS) starting taking errors 4 minutes into prime with a FSB Frequency 432 giving me 3.8888GHz with my 400 NB Strap.
I did successfully prime 3.9GHz with a FSB Frequency 435 for 45 minutes, but stopped the test.
For my system it requires me to set in the BIOS a CPU core voltage of 1.55000v's, and Everest reads 1.53v.
I also had to bump your CPU PLL to 1.60v's.
1.55 Core and only 1.56 PLL would not Prime 3.9GHz error free.
I think you have super temps, but I caution you, at only 20 minutes of prime, I believe they will still have some climbing yet to do.
I would like to see what your getting for temps at 4.0GHz, and 1 hour of Prime95 or God forbid 1.5 hours. That last 1/2 hour can add 5 more C to your Core temps I think...
Prime is a beast of a program, and no game will probably ever take your temps any higher than Prime does.
At 3.9GHz and 45 minutes of Prime, my high core was about 53C.
Last edited by Talonman; 02-08-2008 at 05:24 PM.
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
I loaded my 3.9GHz BIOS profile back in for a 20 some minute Prime95 run...
You inspired me, I think my temps are killer also.
Current room temp was 59.8F
My 3.9GHz temps on a 20 min Barn Burner Run! ....
System cooled on: WaterKegIII Xtreme, D-TEK FuZion CPU water block, D-TEK FuZion Nozzle Kit, D-TEK FuZion Pro Mount, EK-NB S-MAX Acetal Waterblock, Lapped CPU, SB heat sink Enzotech CNB-S1L, and MX-2 used for my TIM!
Last edited by Talonman; 02-07-2008 at 08:17 PM.
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
impressive both of you.
Thanks...
BTW - I love the idea of a Q6600 Water Cooled thread!
My normal old every day 3.8GHz temps, 1 full hour into Prime95:
Last edited by Talonman; 02-07-2008 at 08:17 PM.
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
4ghz talonman! you can do it! lol
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
I am afraid of the CPU voltage...
Is 1.56v or 1.57v really OK on a Q6600?
I promise last screen shot, but a bone stock 2.4GHz Q6600 for a sharp contrast, 40 min into Prime95!
Post some of your Q6600 temps up boys!
Last edited by Talonman; 02-07-2008 at 08:29 PM.
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
yes... i run mine @ 1.58v for 4ghz temps are no way near as good as yours.Your loads are my idles!!!! haha
you are only priming for 1 hour i can't see any harm done mate...
I'm sure you can run 24/7 w those temps
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Wow... I just might have to?
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
here ar my temps @ 4.2ghz. it appears that the limit of this CPU is 4.0ghz. no matter what i do it wont prime @ 4.2ghz, but i can play game and run prime 95. oh well.....temps are still low though, but vcore is suicide. backing back down to 3.6ghz for 24/7
While these temps and overclocks are all very good, is there any chance we can get pics of your setups.
Until we see the setups its difficult to guage what temps others might likely get.
i.e. do you have your mobos on a workbench in open air, or enclosed in case, or lots of high speed fans, out your back door or what?
lol
just thought i would post my temps running everything stock..... @ stock the highest core dont even break 21C!!!!! i love watercooling man!
Last edited by Motivman; 02-07-2008 at 09:50 PM.
Wow, that pretty sick! I can run 3.6@1.4v bios and load under 50c.
Rocketfish Full Tower Case
DFI UT P35-T2R
Q6600 G0 @ 3.0 (333x9); 1.21v bios
2x2gb G.SKill PC8000 @ 1000mhz; 2.0v
VisionTek 4870
400gb Seagate HDD 7200.10
Sound Blaster X-Fi XtremeMusic
Thermaltake Toughpower 750w PSU
Laing DDC-3.2 w/ Petra'sTech | D-TEK FuZion /w nozzles |Swiftech MCR-320 | Swiftech MCRES-MICRO | 7/16" ID (5/8" OD) Masterkleer
What kind of setup do you have? Ambient is 21C with your stock tests?
File Server:
Intel DG22TL, G.Skill F2-6400CL5D-2GBNQ, GameXStream 700w
Main rig:
Silverstone TJ07, Abit IP35 Pro, Intel Q6600, Corsair 620HX, Crucial Ballistix PC8500, eVGA 8800GTS 512, Auzentech X-Plosion
Water cooling parts: D-tek FuZion, MCW60, PA120.3 w/D12SM-12 (3x) @5v, DCC-3.2 w/Petras DCCT-01s
Does the 100C Tjunction core temp read the same temps?
C2D E6750 2.66GHz GO @ 3.6GHz / 450FSB X8 / 1.35Vs (air)
AC Freezer 7 Pro
DFI LP UT P35-T2R
Gskill DDR2 800 HZs / 1:1 4-4-4-12 / 900MHz
Corsair HX 620W
EVGA 7950GT KO (core:595mhz/mem:745mhz)
WD 250GB
2x WD My Book 500gb
Samsung 225BW
I just have to ask what is up since this is showing much slower clock speed here. Also please RESIZE your photos.
Crunchers up and running
Posting Permissions
Reply With Quote
Bookmarks