LET's get SERIUS now - ASUS 2900XT @ 1360MHz+

hipro5 · 01-20-2008, 07:54 AM

I have finished only FIVE Mods out of EIGHT on it and tested it today morning....

ASUS ATI HD2900XT NOT fully moded YET..... ....(Vince I'm coming for you ).....

Cold bug went from -137*C to -187*C (actually I had ALWAYS full of LN2 the Tek-9 V.3 k|ngp|n's pot)....
VERY EASY to bench like this....The ONLY thing I had to do, was to have it fully loaded with LN2.....

VGA's Mods (well some of them...)

Working temperature of it..... (Idle was -187*C and full load -182*C )

After that I've found its benching frequecny, I did some benches as well.....
UNFORTUNATELLY I couldn't hit the 1408MHz Core (for the time been - I have 3 more mods to do on it ).....
Max benchable frequency was 1377MHz Core and 1050MHz Rams....The below benchies were done at a bit lower frequency just to be OK...

Used:
DDR Maximizer for the Ram Modules > CellShock PC14400 DDR3 kit.
1200Watts PSU by hipro-tech
MANY DELTA fans....

2k1 SINGLE 2900XT..... I just run it - not very tweaked

http://service.futuremark.com/compare?2k1=9321890

2k3 SINGLE 2900XT.....

http://service.futuremark.com/compare?2k3=5698235

2k5 SINGLE 2900XT.....

http://service.futuremark.com/compare?3dm05=3925480

Aquamark3 at 5650MHz - SINGLE 2900XT

That's for now....I'll go for CrossFire next week....

.

gillll · 01-20-2008, 07:59 AM

wow! that's wr for gpu speed ?

damn fast ! thanks for sharing.

kemo · 01-20-2008, 08:02 AM

holy shi(f)t

EXPANDER · 01-20-2008, 08:08 AM

Good Good Super fantastic gpu clock

qballe · 01-20-2008, 08:19 AM

impressive

go to cross ... gooo

Dynasty · 01-20-2008, 08:20 AM

damn.......1370mhz on core........

full size tek-9's are sick.......

@ hipro is it 20 or 50ohm for vgpu mod with 2900xt

Oliver · 01-20-2008, 08:23 AM

Thats fast!, really impressive work George...

Looking forward to see what de a capable of when the last three mods is done...

Which mods have you do?.

Keep pushing it.

PPInDaHouse · 01-20-2008, 08:23 AM

With those frequencies Vince will need to re-bench

Brandybuck · 01-20-2008, 08:27 AM

wooow

1360mhz core speed

Dynasty · 01-20-2008, 08:29 AM

Quote:

Originally Posted by PPInDaHouse

With those frequencies Vince will need to re-bench

depends......

Hipro.....will there be any attempts with 3D 06 with qx9650 @ 5700mhz+..

hipro5 · 01-20-2008, 08:35 AM

Quote:

Originally Posted by Dynasty

depends......

Hipro.....will there be any attempts with 3D 06 with qx9650 @ 5700mhz+..

You shouldn't ask that.....Of course...

Quote:

Originally Posted by Oliver

Which mods have you do?.

Keep pushing it.

Some capacitors added on VCore/Vdimm and Vddq and VGPU, Vdimm, Vddq, secret, etc.....

Quote:

Originally Posted by Dynasty

@ hipro is it 20 or 50ohm for vgpu mod with 2900xt

It's a 50ohms...

K404 · 01-20-2008, 08:41 AM

I love that 05 score especially

34K to come I think

Can you share the capacitors parameters you chose? Is the power supply much cleaner now?

hipro5 · 01-20-2008, 08:45 AM

34k with the 7.12 drivers are a peace of cake......

390uF/6.3V

PPInDaHouse · 01-20-2008, 09:01 AM

Quote:

Originally Posted by hipro5

34k with the 7.12 drivers are a peace of cake......

390uF/6.3V

Aren't the 7.11 drivers better?

**k|ngp|n** · 01-20-2008, 09:08 AM

LOL that gpu clock is sick george

. Is this 2900xt the one I sent you that did 1290mhz 3D already?
Thanx for the headsup in letting me know your coming

....now I can work on those 5900mhz+ runs at 1020mhz cores

Dynasty · 01-20-2008, 09:09 AM

hipro what is the value of the cap. highlighted in this pic...

George_o/c · 01-20-2008, 09:12 AM

Well done hipro !

Sick gpu clock

! Looking forward to your Crossfire results

EXPANDER · 01-20-2008, 09:22 AM

@hipro5 TWO 2900XT CF Mode 1360 MHZ GPU clock 3dmark2006 when test?

hipro5 · 01-20-2008, 09:22 AM

Quote:

Originally Posted by PPInDaHouse

Aren't the 7.11 drivers better?

They STILL luck of Canyon Flight....

Quote:

Originally Posted by k|ngp|n

LOL that gpu clock is sick george

. Is this 2900xt the one I sent you that did 1290mhz 3D already?
Thanx for the headsup in letting me know your coming

....now I can work on those 5900mhz+ runs at 1020mhz cores

YES and thank you my friend....

I'll be READY next week....

Quote:

Originally Posted by Dynasty

hipro what is the value of the cap. highlighted in this pic...

....highlighted where?....I can't see anything....

K404 · 01-20-2008, 09:30 AM

The black one, in-between banks of GDDR

Its a thin blue outline , hard to make out

Thanks for the info :toast;

PPInDaHouse · 01-20-2008, 09:31 AM

He is talking about the black cap..

Dynasty · 01-20-2008, 09:38 AM

Quote:

Originally Posted by hipro5

They STILL luck of Canyon Flight....

YES and thank you my friend....

I'll be READY next week....

....highlighted where?....I can't see anything....

that thin blue line outlining black capacitor, to the left of hynix ram IC.
I have an extra 2900XT to abuse, so might be fun to try extra cap. mods
and see where we go from there....

C Stat B · 01-20-2008, 09:41 AM

Amazing work Hipro5 as always. Good Luck with the rest of the mods and benching at 1400MHz+ hopefully!

Oliver · 01-20-2008, 10:13 AM

Quote:

Originally Posted by hipro5

Some capacitors added on VCore/Vdimm and Vddq and VGPU, Vdimm, Vddq, secret, etc..... [/b]

Thank you for the information, really impressive mods... but that the way you play

.

Keep pushing it.

fuds · 01-20-2008, 10:27 AM

impressive!