Asus P5K3 Deluxe Mods

[4Qman]

Asus P5K3 Deluxe Mods

Details By T_M - vCORE


Mod Done

+ Read Points


vMCH Mod Details

Mod Done

[|SiLA|]

how about the pencil mod?vmch and vdimm

[toddm27]

I don't think you can pencil either of those mods

[metro.cl]

I don't think you can pencil either of those mods

i've heard there is a pencil mod Shamino knows how but i havent been able to find pics or get the info from Him (he is really busy now)

[Shark-357]

I see the layout is the same as on mine P5K-E/wi-fi so the voltmods should work ok?

[Nordling]

4Qman or T_M
Plz Vdroop mod need ((((

[T_M]

Sorry mate never done one on it and dont run one anymore

[Achill3uS]

any ideas for the pll mod?

[Nordling]

any ideas for the pll mod?

+1

[Achill3uS]

+1

i've found something...

pll vmod
pll read

i will try it soon, and report

[eva2000]

Hi is there a vdimm and vMCH pencil mod for this board ?

[robz]

Nuts!

[Achill3uS]

i've found something...

pll vmod
pll read

i will try it soon, and report

yep, that vpll mod working 100% on the P5K3 Deluxe

[STEvil]

Anyone know what SMD's should be placed on the back of the board behind the CPU?

[T_M]

Steve, why exactly do you want to do that?
Pretty open ended question, so here's an open ended answer:
All SMD that you possibly can to make the backside look hardcore :P

[STEvil]

SMD capacitors is what I would think, but I was wondering if anyone might know what value would be best or if they are connected to vcc or vfsb or vpll or what.... dont just want to toss any old ones on there and cause fire or something lol.

[luihed]

Does this board have OVP protection or whatever its called? Not sure what asus board it was that cant get over 1.93v vcore.... also will smd grabbers work for the vmch mod?

[Achill3uS]

Does this board have OVP protection or whatever its called? Not sure what asus board it was that cant get over 1.93v vcore.... also will smd grabbers work for the vmch mod?

as i know, it has no ovp, like rog mobo's (blitz, maximus...)
mod: but okay, every mobo has ovp, you can't just coil up 2.0v++ vcore
i think the grabber will work fine, but don't tried...

[trans am]

Can anyone confirm there is a working pencil vdroop mod for the P5k3?

[BenchZowner]

Does this board have OVP protection or whatever its called? Not sure what asus board it was that cant get over 1.93v vcore.... also will smd grabbers work for the vmch mod?

I've run up to 2.31Vcore with this board, so the OVP is definitely above 2.31V

If you can get some thin SMD grabbers, yeah they'll work

[ I know it's been 2 months since this post, but whatever...since I'm going to post something, I said "hit it" ]

as i know, it has no ovp, like rog mobo's (blitz, maximus...)
mod: but okay, every mobo has ovp, you can't just coil up 2.0v++ vcore
i think the grabber will work fine, but don't tried...

Like posted above... OVP is definitely above 2.31V

Can anyone confirm there is a working pencil vdroop mod for the P5k3?

I think it's possible, didn't look for it ( since I prefer hard mods ) but there's just a tiny tiny almost in-existent Vdroop on this mobo with LoadLine Calibration enabled.

-------------Vmch mod now---------------
The Vmch mod shown above is correct, but I have something that bothers me a bit, and I'd like to hear from anyone with a Vmch modded P5K3 Deluxe if he had any issues when running the board with a Vmch of 1.8V-1.85V.
Because I think that the SB PCI-E controller is using the same PWM as a feed ( def. SB PCI-E voltage is 1.50V for ICH9R AFAIR ).

[mrlobber]

-------------Vmch mod now---------------
The Vmch mod shown above is correct, but I have something that bothers me a bit, and I'd like to hear from anyone with a Vmch modded P5K3 Deluxe if he had any issues when running the board with a Vmch of 1.8V-1.85V.
Because I think that the SB PCI-E controller is using the same PWM as a feed ( def. SB PCI-E voltage is 1.50V for ICH9R AFAIR ).

Whoa, that smells deadly

I've run 1.96Vmch for testing maximum 32M stability on this board... haven't had any visible problems so far. But which kind of problems are you referring to? SATA / USB instability? Heat related crashes? Or something else?

[xt0m]

Gonna mod mine soon, stuck at 1.68 vcore "#&!%