Is micron D9GMH BURN IN ?

[vera]

Hi, I have a 2x1gb crucial ballistix pc6400 kit and my motherboard is Asus P5K-E / wifi ap , what is the most stable timings and mhz for this couple ? The rams are not stable at 4-4-4-12 1000mhz 2.2 v in memtest ? but stable at ddr 800 4-4-4-12 1.8v ? please help me

[cadaveca]

most likely 4-4-4-12 1.8v won't pass blend prime95 test. If it does, chances are you'll get 3-3-3-8 @ 800mhz, and 4-4-4-12 1000mhz is limited by your chipset.

[vera]

most likely 4-4-4-12 1.8v won't pass blend prime95 test. If it does, chances are you'll get 3-3-3-8 @ 800mhz, and 4-4-4-12 1000mhz is limited by your chipset.

no, my old team extreem ram is very stable at 4-4-4-12 @1000 mhz

[cadaveca]

Then, like i siad, proly wasn't completely stable. Crucial's got thier binning pretty good right now...got a fan on them rams?

[vera]

up.

[Kain665]

Im actually having the same problem. I was planning to run it overnight tomorrow at 5-5-5-15-9-42-7-7-7 1000mhz at 2.2v and see what happens.

[Cupcake]

my old Gskill HZ D9GMH ran 4-4-4-5 1T 1000Mhz at 2.2v

I am on the D9GKX Version now as the old ones died when I accidentally selected 2.5v ( oops ) but anyway they ran at that speed with no problems on my old Quad GT, 680i and P5K Premium

[h3x0r_1984]

I tried all my straps on my mobo,200,266,333,and 1000 at 4 4 4 12 wasn't in reach even at 2.3V.Memtest would give errors from the first passes.At about 888 i'm stable with 2.1V(maybe less...i haven't tested).Wtf is it about P5k and these rams?All the guys i see here have ballistix+ P5K.I'll test some more on infinity 965..

[cadaveca]

Don't use "auto" secondary timnigs. Try 3-42-6-3-5.

[vera]

Don't use "auto" secondary timnigs. Try 3-42-6-3-5.

No , it's not stable Why crucial is so bad ! it's not stable even 950 4-4-4-12 2.2v my mobo is Asus P5K-E wifi-ap which is the best settings for this mobo ?