Conroe-L >>> a.k.a. Intel Celeron 460ES Socket 775 >>> AMD Killlaaaar >>> SS rotary

[dinos22]

Hardware Used:
Intel S775 Celeron460ES (single core) aka Conroe-L (thanks to wwwww for the CPU...still trying to kill it mate but not with much success )
Gigabyte 680i rev2 (FA bios stock)
Corsair PC10000 Dominator 2GB Kit
SS Blackbox Phase Change (finally blown off the cobwebs ) R290 from barbacue bottle
PCI MX400 Nvidia GFX card
60GB Maxtor IDE Drive
Corsair HX620 620W PSU

Ambients around 19-23C

I was too lazy to install the OS again so i just used the XFX 680i mobo install and it was a bit farked up and it kept freezing in windows so i booted safe mode and ran diagnostics windows setup and it worked sooooo here we go





.........

HAHAHAH THE TEMP SENSOR IS A JOKE HEHEHE -78C hahaha

DID YOU GUYS SEE THE ICE AROUND THE SOCKET AND AROUND EVAP EEK


SuperPi 1M














SuperPi 32M












wPrime 32M & 1024M







They better release AMD CPUs capable of beating at least these things

[Oliver]

Looking really good, that chip is sweet, going to try it on a p35 board? .

Keep pushing it.

[dinos22]

Looking really good, that chip is sweet, going to try it on a p35 board? .

Keep pushing it.

haha thanks

yeap i will put it on P35 mobo as well as for some reason there was a CPU MHz wall at that frequency regardless of vcore which i've used up to 1.9v

FSB at lower multi went to 410 or so

i reckon i could max it out just hoping P35 will like it a bit better

[noroger]

Nice dude, keep it up

[Solarfall]

hahah had a celeron440 a while back.. lol those conroe-L chips are guite funny little things aren't they .. btw good scores dinos

[dinos22]

i honestly hope AMD's gonna have some decent gear
even cheap ass Cellies are killing them in Spi easily

[hipro5]

Ha, ha, ha......They STILL produce Celeron CPUs?......

[dinos22]

i guess

[Johnny Bravo]

dinos22, totally OT but wow I didn't realize you were running 4-33 at nearly 600MHz! What kinda volts do you need on the dominator's to do that? Can you do that 1:1?

[dinos22]

dinos22, totally OT but wow I didn't realize you were running 4-33 at nearly 600MHz! What kinda volts do you need on the dominator's to do that? Can you do that 1:1?

nah man not OT at all
yeah these dominators are sweet as sweet
2.4vdimm basically

1:1 would be a problem with 680i...i've never heard of this chipset scaling to such FSB but i see no reason why it wouldn't go that high 1:1 if the chipset AND my CPU could do that lol

well this celeron has a FSB wall at around 410 but E6700 is around 550 with lots of cold

[Johnny Bravo]

gah totally missed the fact it was a 680i heads still in P35 land these days Still, nice sticks!!!!

[dinos22]

gah totally missed the fact it was a 680i heads still in P35 land these days Still, nice sticks!!!!

hahah thought you might have

yeah i've seen eva do 600 with his sticks at these timings too i think on 680i

P965/P35 this kit with do 595-600MHz 4-4-4
dominators don't like going above 2.45v

[Johnny Bravo]

good good that's much more in line with what I have here

[dinos22]

jumped on Gigabyte P35 board and look at the 32M time



took the No.1 spot on HWBOT



did a few more screamers but will wait for Josh in second place to respond to the challenge :heh:


here is my latest ghetto insulation ... what do you fellas reckon

[hipro5]

Hmmmm.........You're geting better and better every day on the insulation thing.....

[dinos22]

thanks hipro
she was pretty tight

[Solarfall]

very nice clocks.. almost 4.5ghz.. sweet

[over@locker886]

Congrats my friend

Try you close me, my Celeron 32M WR

[dinos22]

Congrats my friend

Try you close me, my Celeron 32M WR

what the hell

how did you get 12m there

something's not right

[massman]

over@locker886: your 32M is way too fast for those clocks :p

[dinos22]

i will play with my E6700 with the mobo but there is no way in hell i could be that bad efficiency wise....must be something to do with the chips as i just looked at other HWBOT submissions and they all look very fast for the Mhz, clocks and latencies on the Celeron 430 >> in fact i think that is more realistic than Celeron 460 as extra cache on conroe ONLY helps in 1M

have a look at this run

it's FAST lol.........but i will check "fast" with E6700 just to compare

something is very strange here that is for sure

[dinos22]

even the 1M times look a bit out on Celeron 460 WTF

i had a look at Celeron 430 entries and none of them were ES CPUs
maybe there is a bug with ES CPUs or higher multies

doubt it's a board issue as there are others in Celeron460 submissions including Asus Blitz which are slower than my runs

will have to investigate this

[over@locker886]

what the hell

how did you get 12m there

something's not right

1 : Abit-Quad-GT is really fast..
2 : I used tweaked Win2003

My Celeron time is about half-min slower than Conroe's.

[dinos22]

1 : Abit-Quad-GT is really fast..
2 : I used tweaked Win2003

sorry i don't think that is the reason

if you have a really fast board you could beat me by 10 seconds but not 5 minutes

must be some issue with these chips (Celeron460)

[over@locker886]

sorry i don't think that is the reason

if you have a really fast board you could beat me by 10 seconds but not 5 minutes

must be some issue with these chips (Celeron460)

Maybe ES chips slower than retail.. B2 vs B1ES..