Post your X2 revision F3 OC and stepping

[LIKMARK]

Seeing there is a number of threads with nice Oc's, I thougt we could post our best clocks here.

Please post your stepping and type of cooling too!

Edit: Please post stabilitytest too if you can, so that we can see what is the max stable clock, wich is the really interesting part.

I'll start the show!

3575 Mhz on air (Zalman 9700LED)

ccb8f 0723spmw

http://valid.x86-secret.com/show_oc.php?id=217778

List:

MODEL | STEPPING | OC | VOLT | COOLING | NAME | STABLE @VOLT

X2 6400+ CCB8F 0722 TPMW 4222 1,55 H2O/pelt mAJORD ----3503 @1,5 Validation AMD CPU-Z WORLD RECORD!!
X2 6400+ CCB8F 0723 VPMW 4002 1,70 SS VictorWang Validation
X2 3800+ CCB8F 0736 GPMW 3993 1,7 SS dbloi
X2 6000+ CCB8F 0723 SPMW 3680 1,65 Air LIKMARK ---->3405 @1,456v Validation (1,35v)
X2 6000+ CCB8F 0721 UPMW 3654 1,575 Air Winterwind ---->3300 @1,425v Validation
X2 3800+ CCB8F 0715 MPMW 3600 1,6 Air eldera ---->3300 @1,40v EE Validation
X2 6000+ CCB8F 0720 XPMW 3550 1,58 Air gOtVoltage---->3550 @1,58v
X2 5600+ CCB8F 0720 XPMW 3548 1,55 H2O Serj_Over ---->3400 @1,425v
X2 6000+ CCB8F 0729 EPMW 3542 ?,?? H2O clon22
X2 6000+ CCB8F 0717 VPMW 3525 1,6 Air Psycho eddie ---->3250 @1,375v
X2 6000+ CCB8F 0731 FPMW 3510 1,56 Air Lightman ---->3510 @1,56v
X2 5600+ CCB8F 0711 WPMW 3505 1,53 Air msimax ---->3505 @ 1,53v
X2 3800+ CCB8F 0715 RPMW 3504 1,65 Air Sabuy-Sabuy EE
X2 6000+ CCB8F 0729 BPMW 3500 1,55 Air SOLDNER-MOFO64
X2 6400+ CCB8F 0731 FPMW 3433 1,45 h2o Cheffy
X2 5200+ CCB8F 0748 FPMW 3410 1,50 Air pablo NZ
X2 5600+ CCB8F 0711 TPMW 3400 1,61 Air gOtVoltage ---->3300 @1,56v Validation
X2 5200+ CCB8F 0721 TPMW 3400 1,39 Air Mad Man ---->3172 @1,39V EE
X2 5200+ CCB8F 0719 XPMW 3350 1,42 Air Quintero ---->3350 @1,42v EE Validation
X2 6000+ CCB8F 0718 XPMW 3300 1.38 Air Quintero ----> 3300 @1,38v
X2 6000+ CCB8F 0717 UPMW 3300 1.42 Air Quintero ----> 3300 @1,42v
X2 6000+ CCB8F 0719 RPMW 3300 1,425 Air cbjaust ----> 3204 @ 1,375 Validation
X2 5200+ CCB8F 0717 RPDW 3300 1,4 Air EniGmA1987 EE
????????? CCB8F 0717 UPMW 3290 ?,?? Air humeyboy
X2 6000+ CCB8F 0721 TPMW 3250 1,4 Air Optix ---->3250 @1,4v
X2 5600+ CCB8F 0711 WPMW 3240 1,425 Air uwackme
X2 3800+ CCB8F 0741 DPMW 3133 1,25 Air @meno

X2 6400+ ACB8F 0723 SPMW 4052 1,65 PHASE SuAsDu

X2 6000+ ACBVF 0651 VPMW 3705 ?,?? Phase Turrican ---->3625 @?,??v
X2 5200+ ACBVF 0651 WPMW 3532 1,8 Phase SuAsDu EE

SC 4000+ CCBVF 0703 MPMW 3532 1,55 ??? Ozzimark ---->3327 @1,55v Validation
X2 6000+ CCBVF 0704 TPMW 3405 1,55 H2O M411b ----> 3300 @1,55v
????????? CCBVF 0713 RPMW 3250 ?,?? Air humeyboye
X2 3800+ CCBVF 0706 VPMW 3200 1,49 Air lopri ----> 3000 @1,31v Validation

X2 5600+ CCBVF 0651 WPMW 3300 1,5 Air bernardmem
X2 3800+ CCBVF 0706 VPMW 3212 ?,?? Air en4cer
X2 3800+ CCBVF 0706 VPMW 3200 ?,?? H2O Jimmer411
SC 3800+ CCBVF 0705 TPMW 3200 1,45 Air p4spooky ---->3200 @1,45v

X2 3800+ CCB6F 0715 TPWM 3500 1,625 Air Neverine ----> 3100 @1,40v Validation
X2 6000+ CCB6F 0713 TPMW 3285 1,525 Air pslee ---->3285 @1,525
X2 5600+ CCB6F 0714 TPMW 3200 1,44 Air Lightman ---->3200 @1,44v
X2 5600+ CCB6F 0713 SPMW 3160 1,44 Air Quintero ---->3160 @1,44v Validation
X2 6000+ CCB6F 0713 TPMW 3300 1,52 Air ea6gka ---->3100 @1,42v


As of today, the CCB8F steppings is the ones you should hope for when you buy a revision F3 cpu

4 GB Ram 2 GB Ram

[m411b]

Stepping: CCBVF 0704RPMW

BEST: Ortho's stable for approx. 1.5hrs, and Boinc stable all night.
http://valid.x86-secret.com/show_oc?id=217867

Running now: 100% stable 1.55v.
http://valid.x86-secret.com/show_oc?id=217897

Not much but for the stepping and considering it wouldn't do 3.2ghz on the DFI, this is a feet.
SPECS ALL IN SIG: Fuzion, BIP II, 50Z
Load temp: 38*c on both cores
Idle temp: 29*c on both

[Stealthmang]

Stepping: CCBVF 0704RPMW

BEST: Ortho's stable for approx. 1.5hrs, and Boinc stable all night.
http://valid.x86-secret.com/show_oc?id=217867

Running now: 100% stable 1.55v.
http://valid.x86-secret.com/show_oc?id=217897

Not much but for the stepping and considering it wouldn't do 3.2ghz on the DFI, this is a feet.
SPECS ALL IN SIG: Fuzion, BIP II, 50Z
Load temp: 38*c on both cores
Idle temp: 29*c on both

Why is your HT Link so low...doesn't that affect your gaming?

[LIKMARK]

Don't think you'll notice the effect of low/high HT link in anything but benchmarks

[Stealthmang]

So I could lower mine from ~900 to ~600 and not see a difference in Gaming?

[LIKMARK]

Yes, but why would you? It's recommended to keep it as close to 1000 as possible as far as I know. (bandwidth related)


Edit: BTW post your oc and stepping!

[Stealthmang]

Because it would help stability?

[hstuehmeyer2000]

Because it would help stability?

if your board can't run 1000mhz ht, there is something wrong with it

[ozzimark]

can we extend this thread to include all F3's?

[m411b]

can we extend this thread to include all F3's?

Agreed!! Steppings and results, Steppings and results, Steppings and results.

[uwackme]

My 5600+ F3 is: CCB8F 0711WPMW

Basic HSF is keeping me below 3.5Ghz @ 100% stable. That will end the day the Ultra120 Extreme arrives. Ill use the JingTing on the chip with the 10K rpm fan on it too. Im going to move the X1900 to the lower PCIe slot as well to improve airflow. Adding sinks to the mosfets, PWN and Vdimm controller as well.

Going to be lapping the 5600/U120, as popping the IHS off is just too much hassle.

[LIKMARK]

can we extend this thread to include all F3's?

Of course! I'll even update my first post and make a list
And I'll snoop around the other threads for info.

[Lightman]

Ok! This is my A64 X2 5600+, CCB6F 0714TPMW, Zalman 9500LED, MSI K9N, for rest of info look @ my sig.

3200MHz@1.44V



This is 24/7 stable OC but for more I need better cooling, PSU and mobo. I'm pretty sure I can do 3.3GHz stable because this is freq I can boot into Windows without problems, but after short warm up, when one of cores is at 62C or above I'm getting restarts or Orthos errors. My vcore is fluctuating +/-0.07V!!

Otherwise I'm very happy

[pslee]

CCB6F 0713 TPMW (it's a b6f, sigh)
x6000
3.27GHZ 1.55v aircool with zalman 9500
m2n sli deluxe

2485 cpu score on 3dmark06.

what are your 3dmark06 cpu scores?

[spainis]

5600+ X2 (CCB6F) @ 3220 @ 1,35V @ Infinty
ASUS M2N32 WS PRO


MB is limiting.

[LIKMARK]

5600+ X2 @ 3220 @ 1,35V @ Infinty
ASUS M2N32 WS PRO

Do you know your stepping?

@pslee: I'm getting about 2550 3Dmark cpuscore

[TiTON]

I have an x5200+ X2 @ 3.532Ghz on Phase.

http://valid.x86-secret.com/show_oc.php?id=218320

I will get stepping info later tonight. I forgot what voltage it was.. I was so frustrated w/ the cold bug :P I was up to like 1.8v try to beat the cold bug, but no luck.. I need to tweak a little more to see what I can do.

SAD aka TiTON

[LIKMARK]

Thats a nice clock SuAsDu, bring on the stepping.

[JAWS]

*still testing*

AD038001AA5CZ
CCBVF 0706 VPMW
350 "N"

For the last few months it's been all Brisbane for me. lol I ordered the F3 last week and was hoping to receive it Friday, but as usual ups took it's time.

I've only had 9.5x to play with so 10x feels kinda weird. default vcore 1.2v


man this chip is going to be fun 1.375 in bios

need a new bios on TF570 Air stock cooler




edit update with better timings

[LIKMARK]

Great clocks folks. Bring'em on!!

[TiTON]

Here is the stepping from my chip above:

x2 5200+ ACBVF 0651 WPMW

SAD

[en4cer]

X2 3800+ 65W

CCBVF 0706 VPMW

So far so good

http://valid.x86-secret.com/show_oc.php?id=219317

[LowRun]

X2 3800+ 65W

CCBVF 0706 VPMW

So far so good

http://valid.x86-secret.com/show_oc.php?id=219317

Very sweet X2 3800+ you got there

[Lightman]

X2 3800+ 65W

CCBVF 0706 VPMW

So far so good

http://valid.x86-secret.com/show_oc.php?id=219317

WOW! A dream come true for every X2 3800+ owner .

Can we get more details of setup like voltages, temps, etc... is it bench stable?

[Reefa_Madness]

How about posting where the F3 processor was purchased, as well?

It would be helpful, to the rest of us, to know who's shipping what.