Page 1 of 4 1234 LastLast
Results 1 to 25 of 89

Thread: Monster QX6850 on Vapo LS

  1. #1
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,654

    Monster QX6850 on Vapo LS

    Specs:

    Intel QX6850 ES
    Abit IP35 Pro B04 bios
    Corsair PC2-10000 Domaintor
    Enermax Galaxay 1000
    Nvidia 8800 Ultra
    Vapochill LS R507 Chilly1 modded
    4x Raptor 150's RAID 0
    2x Gigabyte I-Ram Raid 0

    Sub cooling:

    8K BTU portable ac unit blasting side of case and front of Vapo.

    Notes:

    All benches the memory was running 1:1 3-4-3-9-1T @ 2.4v
    CPU voltage

    1.575v reaches 4.5Ghz
    1.65v reaches 4.6Ghz
    1.7v reaches 4.7Ghz
    1.8v + didnt help with the exception of the top speed screen shot.

    Benching with more than 1.7v on the vapo brings it down, even with the extra sub cooling, short runs like pi, 2k1, and AM3 were possible at 4.7Ghz

    Pretty much everything else is 4.6Ghz

    I did have a blow out of the raid drives where I lost a few good 3D scores but some I did upload and landed #3 in hall of fame and I used a backup drive for 2K1 and AM3.

    The maximum I have taken a screen shot is 10x495FSB but I cannot upload that score. Here is the next best at 10x485FSB screen shot stable.


    http://valid.x86-secret.com/show_oc?id=216637

    First up, Aquamark 3 at 4.75Ghz, 700/1180


    This took a while to get done and took 1.78v at this speed. At this speed only single threaded applications bound to the first core are stable.

    http://service.futuremark.com/compare?2k1=9229412


    Backing off to 4.6Ghz I am able to get off quad core benches like Cinebench.



    Not sure how I did not get a super pi screen cap above 4.7Ghz but here is one at 4.65Ghz, I was climbing up and got distracted with 2K1.



    One of the last things I was working on before the raid bit it was PCMark on the I-Rams in RAID 0. I uploaded an image that was fairly impressive at 485FSB...



    One of the small problems was getting the single drive to boot with raid enabled in bios. I will replicate the benches lost and kick a little more ass in the process. I lost a few 3D runs with single card.

    Right now I plan to rerun 3D with SLI on the 680i and currerntly reloaded on Vista again to play World in Conflict and finish DX 10 stuff now that I have more horsepower.

    I was able to boot to 4.75Ghz and I did get into windows at 4.8Ghz a few times. Here is a screen shot of the general tag in control panels.



    -----------------------------------------------------------------
    680i and SLI results

    Current #1 on the ORB "Vista"
    http://service.futuremark.com/compare?3dm06=2651999


    http://service.futuremark.com/compare?3dm05=3316849


    http://service.futuremark.com/compare?2k3=5468938


    -----------------------------------------------------------------------

    P5K3-D results



    4.7Ghz 760/1250




    Last edited by Charles Wirth; 08-04-2007 at 08:20 PM.
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  2. #2
    Xtreme Member
    Join Date
    May 2005
    Posts
    226
    VERY IMPRESSIVE! i cant wait to see what some of these chips do on dice and LN2


    i no longer use a laptop.



    Do You Owe Me Heatware??

  3. #3
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Good lord Fugger, seems like you were hiding something in your back pocket all along. Those clocks are just nonsensically high.

  4. #4
    Xtreme Enthusiast
    Join Date
    Jun 2006
    Posts
    835
    24/7 gaming with this "monster" must be something unreal

  5. #5
    Xtreme Addict
    Join Date
    Dec 2004
    Location
    Southern California
    Posts
    1,218
    how did the raid blowout happen? scares me a little
    i9-10900k@5.3ghz//MSI MEG z490 Unify//32GB Gskill TridentZ b.die@DDR4666//RTX 2080ti(+150/+700) kingpin bios//Samsung 970 Pro//Corsair AX1200i
    Custom Loop: Dual DDCs->Dual EK XE360 w/GT's -> HK IV CPU -> HK IV GPU ->EK X3 Res controlled by Aquaero 6

  6. #6
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,654
    Yeah, I held back. The 4850 should have been a clue.

    I do have a 4950 that I cannot upload
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  7. #7
    I am Xtreme
    Join Date
    Aug 2003
    Posts
    7,825
    475*10 1t on a quad for 01... good god! nvm was thinking this was on the evga board. The abit P35 does look very fast though.
    Last edited by afireinside; 07-16-2007 at 08:06 PM.
    Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
    3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250

  8. #8
    Xtreme Member
    Join Date
    Jun 2006
    Posts
    428
    ^Sham ran his at 5ghz for '06. Not that hasn't been done with QX6700s, but I imagine it's easier to control temps.

    Nice benches Fugger, that Vapo's holding up well.

  9. #9
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,654
    Blowing out the OS usually happens when you take the ram too far out of spec. I believe I tried to boot at 495FSB 1:1 3-4-3-9 1T @ 2.5v
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  10. #10
    Diablo 3! Who's Excited?
    Join Date
    May 2005
    Location
    Boulder, Colorado
    Posts
    9,412
    Wow nice benchies especially for a modded vapo LS, bet the evap temps were dipping into the positives. Nice chip, plan on putting it under something a bit stronger?

  11. #11
    Xtreme Cruncher
    Join Date
    Dec 2006
    Location
    Texas
    Posts
    784
    Nice on a vapo.

  12. #12
    Champion
    Join Date
    Jun 2002
    Location
    lab501.ro
    Posts
    1,072
    Very nice chip, what week ?

  13. #13
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,654
    SLI next, I have a pair of Ultras begging for attention. I have some GPU cooling inbound as well.

    Micutzu, not sure. Its an ES under the evap atm.
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  14. #14
    Xtreme n00berclocker
    Join Date
    Mar 2006
    Location
    San Jose, CA
    Posts
    1,445
    WWhens it going under ln2?
    Quote Originally Posted by 3oh6
    damn you guys...am i in a three way and didn't know it again
    Quote Originally Posted by Brian y.
    Im exclusively benching ECS from this point forward

  15. #15
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,654
    Cascade next, should hit/bench at 5Ghz I hope. Id even be happy with 5.1Ghz.
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  16. #16
    Hiding from the cops and people I ripped off
    Join Date
    Jun 2005
    Location
    In Bed
    Posts
    6,714
    Prolly not under LN2 but I'm sure we'll see some triple stage cascade runs

    Great clocks FUGGER

  17. #17
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by FUGGER View Post
    Blowing out the OS usually happens when you take the ram too far out of spec. I believe I tried to boot at 495FSB 1:1 3-4-3-9 1T @ 2.5v
    could have saved yourself a bit of time and checked it quickly with a quick loop#5 memtest
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  18. #18
    Hiding from the cops and people I ripped off
    Join Date
    Jun 2005
    Location
    In Bed
    Posts
    6,714
    lol, FUGGER has a stack of hd's with installed OS's so all he's got to do is switch hd's and he'll be up and running in no time

  19. #19
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by njkid32 View Post
    lol, FUGGER has a stack of hd's with installed OS's so all he's got to do is switch hd's and he'll be up and running in no time
    my method's still quicker

    too envious right now to congratulate you charges............these clocks are bloody insane
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  20. #20
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,654
    No it kinda sucked, I was benching on my RAID.

    I switched back to Vista, new drivers and stuff released so I am giving that a try again.
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  21. #21
    Xtreme n00berclocker
    Join Date
    Mar 2006
    Location
    San Jose, CA
    Posts
    1,445
    You see shaminos on the EVGA 680i with P30 bios running 500FSB with the QX6850 and 5ghz 3d stable with ln2
    Quote Originally Posted by 3oh6
    damn you guys...am i in a three way and didn't know it again
    Quote Originally Posted by Brian y.
    Im exclusively benching ECS from this point forward

  22. #22
    Xtreme Cruncher
    Join Date
    Apr 2006
    Location
    Tampa
    Posts
    1,056
    Wow congrats on the results Fugger, is that the same chip in your sig? Man G0 is beastlike.
    Workstation :
    Q6600 @ 3.2ghz/Scythe Infinity (Screw mount mod)
    GA-P35-DS3L (F7)
    4GB G.Skill @ 400mhz 4-4-4-12
    BFG Nvidia 7600gt
    WD 250GB SATAII 16MB (OS/Programs)
    Seagate 250GB SATAII 16MB (Storage)
    NEC DVD+/-RW
    Antec NeoHE 550W
    X-Fi Xtreme Music
    Razer Copperhead
    MS Natural Ergonomic 4000 (Best KB ever!)
    Windows 2008 Enterprise Server x64

    Laptop:
    Dell Latitude D610 - Pentium M 750 1.86Ghz / 1GB RAM

  23. #23
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,654
    Fredyama-san pointed out Kaz-n testing here;

    http://blue.ap.teacup.com/kaz622/38.html



    I didnt kick down in cores yet, I will see what gives.

    I was setting up in the 680i and P30 bios and I may have broke the CPU socket with pressure. Never got any benches done on the 680i, it was mounted under the cascade.
    Last edited by Charles Wirth; 07-16-2007 at 11:02 PM.
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  24. #24
    Xtreme Member
    Join Date
    Aug 2006
    Location
    WAW,PL
    Posts
    292
    Just for comparison (Cascade unit built by piotres, ~ -98oC):

    http://valid.x86-secret.com/show_oc.php?id=217826

    Above was done on VCore=1.70V (MB without any mods).
    For sure it's not my last step on this Next try on LN2 coming soon... probably
    Last edited by pmp; 07-17-2007 at 12:51 AM.

  25. #25
    Xtreme Addict
    Join Date
    Apr 2006
    Location
    Cairo
    Posts
    2,366
    Quote Originally Posted by FUGGER View Post
    Fredyama-san pointed out Kaz-n testing here;

    http://blue.ap.teacup.com/kaz622/38.html



    I didnt kick down in cores yet, I will see what gives.

    I was setting up in the 680i and P30 bios and I may have broke the CPU socket with pressure. Never got any benches done on the 680i, it was mounted under the cascade.
    That screen own anything we have ever seen

Page 1 of 4 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •