I been trying to get 1T stable for quiet awhile now.
I found the secret this morning by accident really.
without wasting your time...
NB to 333 with bios 0404.
use the 5:6 or 5:8 dividers.
have good ram. lots of patience, and cooling.
push the voltage hard.
tweak.
you know the routine.
Heres some 10K Bandwidth at only 3.1 Ghz with a Allendale.
1T is about 3-4 hundred more in bandwidth.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
Nice....
Stable for SPI or 3DMark?
Wow, that is sick.
Formerly XIP, now just P.
I am done benchmarking for the day.Originally Posted by sobih25
Nice...
Stable for SPI or 3DMark?
all I focused on was breaking 10K.
maybe tommorow I will try, but tonight, I am just gonna relax, eat something good and be happy with such a good afternoon of tweaking.
these results on a scale of 1 to 10 for how hard they would be for anyone here to replicate, a 4.
so literally, anyone with a P5K Deluxe, bios 0404, some good D9 and some trial and error, could easily do this too.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
2.55. I was pushing everything the board could give me, without it being modded.
I really wish I had more voltage for it... I think this board can go much higher at 1T with more voltage.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
You sure you are at 1T?
Last edited by Charles Wirth; 06-27-2007 at 11:24 PM.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
your at MUCH higher MHz... and MHz directly effects the ram bandwidth.
do that same test, at 3 ghz... with a 2 meg cache.
plus, look at the command rate.
you cannot change the command rate, within windows.
try it. you cant.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
I was thinking you might be using the Maximizer, thats very cool for the boards stock 2.55v limit. Must try this out, thanks kunaak.
I would use the maximizer, but till I see someone else using it, without killing the board, or needing to mod it... I wont be using it.
I just dont know if the maximizer works on the P5K yet, and I dont have the cash to be the guini pig.
(how do you spell that anyways?)
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
guinea I think
All along the watchtower the watchmen watch the eternal return.
My bad, dropped around 400 points at the same speed. I could see the 2M chip doing worse as well.
This board doesnt have a 1T option yet but it would be nice to compare or try some fat body 3-2-2-x 1T. I have some sick Muskin fat bodies
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Yup spelt guinea
Yeah cpu mhz will effect everest bandwidth numbers here's 8x493FSB 1:1 @493mhz 4-4-4-9
But to achieve 10k bandwidth with just 3.1ghz is very nice
Guess there is some use to 0404 bios afterall
---
eva. come on,
do the 1T...
you know you want to.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
Mobo: P5K Deluxe
Bios: 0311 (official)
Memory: OCZ HPC Edition 1gb x 2 kit
Voltage: 2.5vdimm.
1T require more vdimm as compared to 2T on same memory settings
Last edited by memory; 06-28-2007 at 03:10 AM.
Nice ..but expect to see better bandwith - here is some 1T numbers 450Mhz 3-3-3-3..1T (1:1 of course) with 680i to compare
DFI 680i UT
X6800 Air Tuniq
Corsair 6400C3 2.5v
Superpi 1MB run
As Kunaak said earlier...try that at 3.1GHz with a 2MB L2 cache chip now.
That's really something...1T at such speeds. memory's 600MHz shot is very impressive too. P35 is looking more interesting by the day.
Yes it is ... one reason I'm liking ddr3
But to achieve 10k bandwidth with just 3.1ghz is very nice:
http://s90.photobucket.com/albums/k2...0C6Everest.jpg
2600K | Maximus IV Formula | 12G Corsair 1600 C8 | 2x 6950 | Coolermaster Scout
crazy...
my little 1080 mhz ram is nearly as fast as your 1440 mhz DDR3.
well... theoretically....
who knows about real life...
need someone with DDR2 and DDR3 + the P5K deluxe, and P5K3 Deluxe + lots of time on thier hands, and willing to test how 1T effects DDR2 and how it compares against DDR3...
if only someone at Asus felt like giving me some free hardware.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
Yeah I'd really like to see some comparison tests like that from you or one of the other expert memory tweakers around here.
2600K | Maximus IV Formula | 12G Corsair 1600 C8 | 2x 6950 | Coolermaster Scout
Just Curious...
but can anyone else do this...
3.1 ghz, and 10K bandwidth??
perferably with a 2 meg cache, since the 4 meg cache has a instant advantage with bandwidth too.
I know this was hard as hell for me to do...
I'd like to see how hard this was, if someone else might try it.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
Finally it can run DDR2-1170 4 4 4 4 1T but can not run any bench.
I dont know how much 4mb L2 cache makes a difference so I ran this at only 3000mhz.... I think at the end high mhz and tight timings still the best setting.... First try ... Rams are Ballistix Pc2 5300....
From an earlier test...@3600mhz...
Settings are 32M stable
kentsfield + striker extreme + 2x1gb crucial 10th ae. difference between 1t/2t.
cannot use 1t on p5kdlx and these sticks :|.
Man when I attempted 1T on my P5KD I couldn't get anywhere.
For 1T performance my Striker did a lot better.
Maybe I'll give another go for 1T.
CPU: Q6600 @ 3.6ghz G0 Week 37B
Mobo: Asus P5k Deluxe
Cooler: TRUE 120 (150cfm Delta)
2xHR-05
2xHR-09
Mem: G.Skill 4x1Gb 6400HZ
Vid: HIS 4850
HDD: 80Gb 16mb Cache Raptor
500Gb 7200.11 Seagate
PSU: Enermax Noisetaker 600w
Case: Thermaltake Armor (4x120mm 104CFM Panaflo)
3dmark06: 16k
Posting Permissions
Reply With Quote
Bookmarks