NewConcept? DDR2 512m*4>1G*2? 2GB DDR-1252 C4 on Asus 975x

[VictorWang]

platform:
QX6700es
Asus P5W64 WS Pro, bios=0022, vcore/drop/dimm/mch mod
GSKill PC6400HZ 1GB Kit*2 ( 512m*4 ) cooled on Air with 8cm 2000rpm fan
Zippy 850w
-----------------------------------------------------------------------

dont know if it's the first time break DDR-1250 C4 on Asus 975x platform
I never achieve this with my 1G*2 sticks, normally max at DDR-1170 pi_1m with all the same setup


2.8v DDR-1252 4-4-4-8 pi_1m
CPUZ Validate: http://valid.x86-secret.com/show_oc?id=143152





================================================== ==
and stability test:
2.35v DDR-1100 4-4-4-8 pi_32m

[TaPaKaH]

I seem to get a nice RAM in few days

[VictorWang]

I seem to get a nice RAM in few days

just make sure u want one pair or 2 pairs

[TaPaKaH]

I`m not sure that I can afford even 1 pair of these
Noone wants to buy my handpicked 8000UL

[VictorWang]

I`m not sure that I can afford even 1 pair of these
Noone wants to buy my handpicked 8000UL

I have a good pair of 5400ul in hand also
now fat D9 is gonna retire

[fhpchris]

Nice 1m, but the 32m looks kinda slow?

I do not understand "the death of fatbody" when you are running slower 32m times than I did on fatbody or GMH.

[afireinside]

Could you post 2*512 times for comparison?

[MACMAC]

Now it's time for some 4x1GB

[chester]

wooooooooooooooooooot wow G.J.

[Johnny Bravo]

Could you post 2*512 times for comparison?

I second this, am curious if there's much difference in Spi times for 2x512MB and 2x1GB as it's obvious the smaller sized sticks can clock higher.

[VictorWang]

Nice 1m, but the 32m looks kinda slow?

I do not understand "the death of fatbody" when you are running slower 32m times than I did on fatbody or GMH.

no tweaks at all and run spi with 2*cpuz
how fast would you expect

fatbody can never run 4-4-4-8 @ ddr-1256 with 512m*4 on P5W64 or other asus' 975x platform.

to others.
these 2*1GB Kits,
one max=1260 4-4-4-8 pi_1m @ 2.8v / 1100 4-4-4-8 pi_32m @ 2.35v
another on max= 1252 4-4-4-8 pi_1m / 1120 4-4-4-8 pi_32m @ 2.35v
so... put them together, max= 1252 4-4-4-8 pi_1m/ 1100 4-4-4-8 pi_32m
much better than 1G*2 or 1G*4 or 2G*2

[over@locker886]

no tweaks at all and run spi with 2*cpuz
how fast would you expect

fatbody can never run 4-4-4-8 @ ddr-1256 with 512m*4 on P5W64 or other asus' 975x platform.

to others.
these 2*1GB Kits,
one max=1260 4-4-4-8 pi_1m @ 2.8v / 1100 4-4-4-8 pi_32m @ 2.35v
another on max= 1252 4-4-4-8 pi_1m / 1120 4-4-4-8 pi_32m @ 2.35v
so... put them together, max= 1252 4-4-4-8 pi_1m/ 1100 4-4-4-8 pi_32m
much better than 1G*2 or 1G*4 or 2G*2

Nice results from this ram..

[fhpchris]

no tweaks at all and run spi with 2*cpuz
how fast would you expect

fatbody can never run 4-4-4-8 @ ddr-1256 with 512m*4 on P5W64 or other asus' 975x platform.

to others.
these 2*1GB Kits,
one max=1260 4-4-4-8 pi_1m @ 2.8v / 1100 4-4-4-8 pi_32m @ 2.35v
another on max= 1252 4-4-4-8 pi_1m / 1120 4-4-4-8 pi_32m @ 2.35v
so... put them together, max= 1252 4-4-4-8 pi_1m/ 1100 4-4-4-8 pi_32m
much better than 1G*2 or 1G*4 or 2G*2

No, I am only saying the time is slow! Those are VERY NICE clocks on i975!

I had faster times @ 4-3-2-x,3-2-2-x,and 3-3-3-x on GMH

[VictorWang]

thx 886

to fhp,
pi_32m is slow 'coz of no tweak at all.
I can make it 1min faster or more ^_^