Super Talent T800UX2GC4 D9GMH

bazi · 11-29-2006, 10:07 AM

Has anyone some screen how high goes that Super Talent but on GMH?

AzraelDarkangel · 11-29-2006, 10:13 AM

Same I think but 1gb kit
http://www.xtremesystems.org/forums/...d.php?t=122666

bazi · 11-29-2006, 10:17 AM

Quote:

Originally Posted by AzraelDarkangel

Same I think but 1gb kit
http://www.xtremesystems.org/forums/...d.php?t=122666

its ok but on GKX i'm asking about the GMH

krampak · 11-29-2006, 02:59 PM

I'll recive a pair of T800UX2GC4 tomorrow. Will tell you if I remember it xD

wtkprol · 11-29-2006, 07:34 PM

Ive got some but I am installing windows right now, so tommorow I might have results up.

bazi · 11-30-2006, 01:08 AM

Quote:

Originally Posted by wtkprol

Ive got some but I am installing windows right now, so tommorow I might have results up.

i'm rather interesting in MHZ and CL of ram

MusicIsMyLife · 11-30-2006, 01:50 AM

I testet one pair of this memory.

On Asus P5B Deluxe (bios 0714) I could run DDR2-964 with 4-4-3-8 and 2.25 volt (stable through superpi 32m).

On Foxconn C51XEM2AA I could run DDR2-1060 with 5-5-5-15 and 2.17 volt or DDR2-908 with 4-4-3-8 and 2.17 volt (stable through memtest).

On AM2-platform I can´t use 1t and/or could get better timings than 4-4-3-5 with 2.17 volt.

bazi · 11-30-2006, 03:11 AM

Quote:

Originally Posted by MusicIsMyLife

I testet one pair of this memory.

On Asus P5B Deluxe (bios 0714) I could run DDR2-964 with 4-4-3-8 and 2.25 volt (stable through superpi 32m).

On Foxconn C51XEM2AA I could run DDR2-1060 with 5-5-5-15 and 2.17 volt or DDR2-908 with 4-4-3-8 and 2.17 volt (stable through memtest).

On AM2-platform I can´t use 1t and/or could get better timings than 4-4-3-5 with 2.17 volt.

so itsn't rather possible to get over 1 k on CL4 on that GMH??

kemo · 11-30-2006, 03:20 AM

Quote:

Originally Posted by bazi

so itsn't rather possible to get over 1 k on CL4 on that GMH??

With D9GMH you can go above 1k Cas4 but voltage range from 2.3-2.5 depends on your module and what mobo your are using

MusicIsMyLife · 11-30-2006, 03:56 AM

Quote:

Originally Posted by bazi

so itsn't rather possible to get over 1 k on CL4 on that GMH??

I never tried higher voltages than 2.25 volt. Because it´s not my memory.

I think on c2d I can reach DDR2-1000 with 4-4-3-8 at 2.3-2.35 volt. Should be really easy with my kit.

bazi · 11-30-2006, 04:06 AM

Quote:

Originally Posted by MusicIsMyLife

I never tried higher voltages than 2.25 volt. Because it´s not my memory.

I think on c2d I can reach DDR2-1000 with 4-4-3-8 at 2.3-2.35 volt. Should be really easy with my kit.

ok so i still waiting for a screens with highest score

krampak · 11-30-2006, 04:18 PM

I got mine tested... I'm quite disapointed.

I get BSOD at any voltage higher than 2.2V

Timings doesn't care... I just have to keep 2.2V.

Mine can't do 4-3-3 at DDR2 800, so max agresive timings are the default ones, 4-4-3. At 4-4-3 it has rised to 460Mhz 2.2V, anything above 460Mhz needed Cas 5-5-5. I tried 2.3, 2.4, 2.5 adn 2.6V to try 270 at 4-4-3 but always got a BSOD (only with the supertalent, i have another kit of mushkin pc6400 D9GMH which likes 2.65V). And at cas 5-5-5 it even does 480Mhz... just about 475Mhz.

This is on a Abit AW9D-MAX, tried 4:5 and 2:3 dividir if it helps but nothing, same results.

As i have said, quite dissapointed...

PD: The mushkin does 440Mhz Cas 4-3-3 2.65V, 486Mhz Cas 4-4-3 2.45V and only 492Mhz at 5-5-5 2.4V. I may be doing something wrong

PD2: It's the blue heatsinks one and they are week 45 of 2006.

krampak · 12-01-2006, 05:45 AM

I've removed the heatsink and w00t... that's how it looks:

Rewrited chips ?

What are suposed to be ? D9GMH as well ?

shimmishim · 12-01-2006, 02:37 PM

interesting... anyone else know about these modules? are they d9's?

berk · 12-03-2006, 05:30 AM

My super talent didnt work that well on the AW9D-max either..on the P5B DELUXE i had 4-4-4-12 on 500mhz with the 4/5 divider.
I upped the volts to try and achieve that again but my RAM eventually borked(on the Abit).

krampak · 12-03-2006, 10:34 AM

I've just noticed that not all chips have the same "serial" written. There are chips with:

SY010403PEBPC (most of them)

But there are some others than have:

S0116802PEBPD

Written into it.

What is this suposed to be ? Is supertalent using different chips in the same stick ? And does someone have any information about those remarked chips ?

GrimReaper · 12-03-2006, 10:40 AM

could be D9GCT

shimmishim · 12-05-2006, 05:32 AM

just got my kit yesterday.

cpu-z shows them as pc5300... but run fine at 420 4-4-4-12. i haven't tweaked yet but they should hopefully get up to 500!

Anyone know if week 31 happens to be d9gkx still? i'm guessing not but just wanted to ask

CedricFP · 12-06-2006, 04:45 PM

Does anybody have an update on this RAM?

It's the only POTENTIAL D9GMH I can buy here in Hong Kong. G.Skill's are out of stock indefinitely. Corsairs are now Promos, and Patriot are now Elpida. Can't buy Crucial, Buffalo, OCZ or TeamGroup out here.

That leaves SuperTalent - THESE EXACT MODELS: T800UX2GC5/T800UX2GC4

EDIT: If someone would be willing to help a person like me in a rather unfortunate ram position, please drop a PM my way. If these Super Talent turn out to be Elpida chips or something, I'm in dire need of a middle man in the US who can pick me up some NewEgg rebated Crucial sticks then send em my way.

blade_pan2002 · 12-07-2006, 12:32 AM

Quote:

Originally Posted by MusicIsMyLife

I never tried higher voltages than 2.25 volt. Because it´s not my memory.

I think on c2d I can reach DDR2-1000 with 4-4-3-8 at 2.3-2.35 volt. Should be really easy with my kit.

Which mem do you have?the silver or the blue?

Can you tell me how much efficiency sandra shows?

MusicIsMyLife · 12-07-2006, 03:02 AM

Quote:

Originally Posted by blade_pan2002

Which mem do you have?the silver or the blue?

Can you tell me how much efficiency sandra shows?

I´m a reviewer of the german hardwaresite www.planet3dnow.de .

I tested 3 pairs of memory on am2 (Kingston, Corsair and Super Talent). From Super Talent I used the silver one. Sandra showed nearly 61 efficiency. More information and benchmarkresults you can see here.

blade_pan2002 · 12-07-2006, 05:24 AM

Quote:

Originally Posted by MusicIsMyLife

I´m a reviewer of the german hardwaresite www.planet3dnow.de .

I tested 3 pairs of memory on am2 (Kingston, Corsair and Super Talent). From Super Talent I used the silver one. Sandra showed nearly 61 efficiency. More information and benchmarkresults you can see here.

Thanks...a lot!

Sandra's efficiency isn't so good,is it?

how much is the average good score?

MusicIsMyLife · 12-07-2006, 06:57 AM

Quote:

Originally Posted by blade_pan2002

Thanks...a lot!

Sandra's efficiency isn't so good,is it?

how much is the average good score?

On am2 and ddr2-800 I would say it´s a normal score. Always could be better, but it´s ok.

Maxfly · 12-07-2006, 02:54 PM

Quote:

Originally Posted by CedricFP

Does anybody have an update on this RAM?

It's the only POTENTIAL D9GMH I can buy here in Hong Kong. G.Skill's are out of stock indefinitely. Corsairs are now Promos, and Patriot are now Elpida. Can't buy Crucial, Buffalo, OCZ or TeamGroup out here.

That leaves SuperTalent - THESE EXACT MODELS: T800UX2GC5/T800UX2GC4

EDIT: If someone would be willing to help a person like me in a rather unfortunate ram position, please drop a PM my way. If these Super Talent turn out to be Elpida chips or something, I'm in dire need of a middle man in the US who can pick me up some NewEgg rebated Crucial sticks then send em my way.

the c4 model is the d9gmh.the c5 i cant say.

CedricFP · 12-07-2006, 05:37 PM

I see. Thanks for the info Maxfly. I'll go check today if they have any C4 in stock.

By C4 I assume the product code means CAS4?