Finally had time early Sat. morning to sit down and get the basic mods done to the Badaxe, including:
1. Debug mod using jumper
2. Vdimm mod
3. Vmch mod
4. Extreme Vcore mod
2 & 4 are probably not needed for an aircooled rig, but are done to allow fine tuning voltages in between bios settings.
See attached picture for the modded board. Hopefully I'll have the time to put the system together this weekend and do a little ocing.
DDTUNG
Last edited by DDTUNG; 11-03-2006 at 09:10 PM.
XtremeSystems - we overclock and crunch you to the ground
I left the optimized files on three 3GHz P4 HTs. Ban me.
Very nice Victor!!! Cant wait to see how it does..
looking nice!!!!
CPU: Intel Core i7 3930K @ 4.5GHz
Mobo: Asus Rampage IV Extreme
RAM: 32GB (8x4GB) Patriot Viper EX @ 1866mhz
GPU: EVGA GTX Titan (1087Boost/6700Mem)
Physx: Evga GTX 560 2GB
Sound: Creative XFI Titanium
Case: Modded 700D
PSU: Corsair 1200AX (Fully Sleeved)
Storage: 2x120GB OCZ Vertex 3's in RAID 0 + WD 600GB V-Raptor + Seagate 1TB
Cooling: XSPC Raystorm, 2x MCP 655's, FrozenQ Warp Drive, EX360+MCR240+EX120 Rad's
Excellent..can't wait to see the results!
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Originally Posted by Frisch
Here's a good woodpecker pic for you
Don't worry Victor! NJKID is just worried that we'll be kicking his butt on the dual AMD's with the woodcrests!Here's a good woodpecker pic for you
These posts of his are just nervous energy because he is just plain scared!
The gauntlet has been tossed down!
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
You better duck Dave... Sorry for messing up your thread Victor!
Ok, last shot and then I'll get out of the thread also:You better duck Dave... Sorry for messing up your thread Victor!
Eric: I'm not nervous. I'm just concerned where I'll get the cash to come out and help you set that up properly so that DDT won't feel he wasted his money on it. Promise, I won't tell anyone I fixed your mistakes.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Nice mods!
All crunching 24/7, both cores 100% loaded
e6600es @ 3.8 (423) / p5W64WSPro / Noctua120 / Gskill 6400 / NV 7950 / 3 x Rptr150 Raid 0 / OCZ GmStr 700 / X-Fi
e6700 @ 3.6 (400) / p5b Dlx / Big Typhoon / Corsair 6400 / PCP&C Silencer 750
e6300 @ 3.465 (495) / p5B Dlx / Scythe Infinity / GSkill 8500 / Mushkin 550 PSU
e6400 @ 3.2 (400) / p5b Dlx / ThermalRight SI-128 / GSkill 6400hz / SunBeamTech 550 PSU
e6300 @ 3.08 (440) / gb S3 / Intel Stock Cooler / Gskill 6400hz
Like all the xtreme HELP you find at XtremeSystems?
Please HELP Xtreme Systems HELP fight Aids and Cancer on the World Community Grid!
Join the XtremeSystems WCG Team
yes...the moderators at xs are indeed quite nice
Perkam
Exactly what I meant, especially njkid32.
All crunching 24/7, both cores 100% loaded
e6600es @ 3.8 (423) / p5W64WSPro / Noctua120 / Gskill 6400 / NV 7950 / 3 x Rptr150 Raid 0 / OCZ GmStr 700 / X-Fi
e6700 @ 3.6 (400) / p5b Dlx / Big Typhoon / Corsair 6400 / PCP&C Silencer 750
e6300 @ 3.465 (495) / p5B Dlx / Scythe Infinity / GSkill 8500 / Mushkin 550 PSU
e6400 @ 3.2 (400) / p5b Dlx / ThermalRight SI-128 / GSkill 6400hz / SunBeamTech 550 PSU
e6300 @ 3.08 (440) / gb S3 / Intel Stock Cooler / Gskill 6400hz
Like all the xtreme HELP you find at XtremeSystems?
Please HELP Xtreme Systems HELP fight Aids and Cancer on the World Community Grid!
Join the XtremeSystems WCG Team
Looking very good so far.
Now show us some numbers
Id thst the first C2D you are playing around with?
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
WOW, very nice mods, when you start to run it?
Nice work there DDT. Can't wait to see your touch on these C2Ds. Enjoy the weekend.....
Watch how hot these get. If you cant hold a finger to them, they're too hot in my opinion..
All along the watchtower the watchmen watch the eternal return.
Well it's up and running burning in with two instances of WCG in XP Pro SP1 at 3.7G with the stock HSF. For some strange reason the Vdimm mod is not working. I'll redo the mod when I shut down to switch HSFs and PSUs.
DDTUNG
XtremeSystems - we overclock and crunch you to the ground
I left the optimized files on three 3GHz P4 HTs. Ban me.
3.7 isn't bad..and I noticed 92 now on your account?Well it's up and running burning in with two instances of WCG in XP Pro SP1 at 3.7G with the stock HSF. For some strange reason the Vdimm mod is not working. I'll redo the mod when I shut down to switch HSFs and PSUs.
DDTUNG
You borg the Mrs. laptop when she wasn't looking?
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
What's your FSB and RAM at, Victor?Well it's up and running burning in with two instances of WCG in XP Pro SP1 at 3.7G with the stock HSF. For some strange reason the Vdimm mod is not working. I'll redo the mod when I shut down to switch HSFs and PSUs.
DDTUNG
What are the temps at at 3.7 with the stock HSF? Which PSU are you moving to?
Crunching to Crush Cancer
Somebody, Stop Me!
Eric??? Are you this is a woodpecker or is it just a stubborn bird???Here's a good woodpecker pic for you
2x Harpers 5492, 8GB DDR2-800 FBDIMM, SuperMicro X7DWA-N, Raptors in Raid0, 1TB Storage, Dual Watercooling loop, U2UFO, Enermax 1000W
Some nice LianLi case, i7 965 Extreme, FoxConn BloodRage, 3x2GB OCZ Blade 2000, Zotac GTX260, Enermax 700W
Awesome, looking very good there.
I get mid 60Cs in bios. Don't know what it is in XP under load, since I am having a lot of trouble getting monitor software to work on this board. I am using a 400W Silverstone and will swap it for a SPI 550 from the office on Monday.
3.7 was at 1333 + 11% with ram set at 667(FSB:RAM 4:5). It is now at 1333 +14% or 3.8.
DDTUNG
XtremeSystems - we overclock and crunch you to the ground
I left the optimized files on three 3GHz P4 HTs. Ban me.
That board will do 30% + 1333, confirmed. You still have room to go up.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
The reported RAM ratio in speedfan is screwed. It seems to use the CPUs default strap to calculate RAM divider and therefore frequency. IE with the 1067 strap set in BIOS (with the FSB override set to 0%) and the 667 divider selected, the FSB:RAM ratio is 4:5. If the chipset strap is changed to 1333 then the FSB:RAM ratio is 1:1. However CPU-Z will show the FSB:RAM ratio as 4:5 in both cases.
Asus P9X79 Pro | i7 3820 @ 4.875GHz | 4x4GB Corsair DDR3-1600| 3x 6970 Lightnings watercooled| Corsair 1200W PSU | Mountain Mods Ascension case |
Victor use Core Temp for monitoring temps.
attached below.
Donate to XtremeSystems!
Workstation: Intel Core i7 4770, Asus Maximus VI Gene, 32GB Corsair Dominator Platinum DDR3-1866, eVGA SC GTX Titan, 256GB Crucial M4, Corsair HX850, Corsair H100i. Corsair Carbide 350D
Fileserver: 2x AMD Opteron 2425HE, Supermicro H8DME-2, 24GB DDR2-667, Supermicro 846TQ 24bay Chassis, Redundant 920w, 256 Crucial M4 boot, 20TB Storage
Notebook Asus Zenbook UX32VD-DH71, Intel Core i7 3517u, 10GB DDR3-1600, 256GB Crucial M4, Geforce GT 620M
core temp ftw, when I am doing my OS overclocking I have an instance of that open to make sure I'm not cooking my cores. You doing this on an E66 or E67? Put that sucker under some monster aircooling/water and break 4 GHz
Posting Permissions
Reply With Quote
Bookmarks