e6400 4040mhz on air benchable!

[Revv23]

Much more to come, just wanted to celebrate my milestone

CPU e6400 week 28? (will look up full stepping soon)
MOBO: P5b Deluxe full modded
Ram: Gskill 6400 HZ (far from optimized)
Cooling: Big Typhoon with sanyo 120.
Power: OCZ GXS 700w

Vcore: 1.65 bios 1.65 actual
Vdimm: 2.3-2.75
vmch: 1.6-1.8

[Revv23]

Ambient i would say is around 65f BTW

Picture of rig while running pi:

[Vikodemous]

Very Nice Rev.

[Revv23]

Very Nice Rev.

Thanks!

[Revv23]

Looks like 3d05 is a bit lower 3920mhz.

Stock 1900xt

This is at 1.7v:



Who dares me to go for 1.75v?

[The_Hardstylez]

wow,nice results

Sick for a E6400. Must be a 28B

[DAK1640]

Very nice chip...I was just looking at your sig & was thinking same CPU / RAM / and mobo...I am now convinced. Where did you buy the CPU from?

[Revv23]

Newegg.

Yes week 28 b1

full date L28B168

got like two weeks ago, was maxed out at 3.6ghz but a good lapping took care of that. (yeah it was that bad.)

[Revv23]

Here is a before and after shot of the CPU:

[Revv23]

And now to my real pride and joy, my g.skill ram.

This is the stuff i won in the Signature contest, its not cherry picked but i did get some amazing heatspreaders:





And to give you an idea of what it can do, i am still tweaking right now, these damn 32m runs take forever:



That was at 2.75v but i dont think it needs it for these timings, i just maxed it out and im lowering as we speak.



Thanks again G.Skill!

[Revv23]

And 32m

[BAR*B*Q]

Newegg.

Yes week 28 b1

full date L28B168

got like two weeks ago, was maxed out at 3.6ghz but a good lapping took care of that. (yeah it was that bad.)

wow... 400mhz from grinding the heatspreader ?
can you name the differences in temps - before and after ?

[Fr3ak]

Very nice rev!
Dont show any more pics of that ram, it could have been my ram :P
But I am very happy with my HZ too, though it has black heatspreaders

Cpu temps would be interesting at those volts on air.
Have you tried running 03? Thats the 3D Mark you can run with worst cpu clocks.

[[cTx]Philosophy]

Verry impressive, im kicking myself in the bawls now too for not getting a p5b and a 6400, but my budget at the time was ponly long enough for DS3 and 6300

I love the timings, what are gonna be your 24/7 timings and volte etc etc etc...

[Revv23]

wow... 400mhz from grinding the heatspreader ?
can you name the differences in temps - before and after ?

The thing was the cpu couldnt take the volts because the heat was so bad, i lost over 10c because of the lapping, it was concave so the wole center of the cpu wasnt making contact.

my loaded was reaching over 78 before with 1.55 now i think orthos gives me 77 with 1.706v(DMM reading) measured with core temp...pi temps are lower i dont watch so much, just my stability, so i cant tell exactly my numbers, but the point is its very worth it once the volts come into play, before that not so much imo.

[Revv23]

Verry impressive, im kicking myself in the bawls now too for not getting a p5b and a 6400, but my budget at the time was ponly long enough for DS3 and 6300

I love the timings, what are gonna be your 24/7 timings and volte etc etc etc...

You still have a very good combo!!

My 24/7 setup ive been running all last week, it will be like this:

8x450 = 3600mhz
1:1 Ram 3-4-3-4
1.5vcore
2.45vdimm
1.6vmch

Im still tightening my timings, at 490 ive shaved a full 20s off my 32m score so far. (i dropped the multi so nothing special, but every .001 counts eh?

[Revv23]

Very nice rev!
Dont show any more pics of that ram, it could have been my ram :P
But I am very happy with my HZ too, though it has black heatspreaders

Cpu temps would be interesting at those volts on air.
Have you tried running 03? Thats the 3D Mark you can run with worst cpu clocks.

Hmm i dont really like 03 much, cpu clocks dont seem to make much difference in it. thats why i like 05, i can watch my system improve, similar to super pi times.

Id feel the same about 01 but i dont know how to tweak it so its not really fun for me.

[hausner]

thats a nice cpu , great job man !

[Revv23]

thats a nice cpu , great job man !

Thanks, you have a nice cpu too it looks like!

[ANP !!!]

Superb Job.... This is Awesome

[theteamaqua]

hmm where do u live?? like not in the US?? cuz i heard u cant get those L628B in US..

whats ur 24/7 speed?? man i hope i can get a E6600 to 3.8GHz for 24/7

[Revv23]

hmm where do u live?? like not in the US?? cuz i heard u cant get those L628B in US..

whats ur 24/7 speed?? man i hope i can get a E6600 to 3.8GHz for 24/7

CPU is from newegg... i could do 3.8 24/7 with high voltage but i prefer to run 3.6 with safer volts i think.

[Revv23]

So im getting ready for overclocking this 1900, looks like its pretty weak on the core, but temps are high lets see if i can cool her down.




Thats right, its a big typhoon.

My VGA cooling>your VGA cooling

[sierra_bound]

Nice chip

[NO1B4ME]

Nice chip

Exactly what i was thinking.

COngrats man .......