MMM
Page 1 of 2 12 LastLast
Results 1 to 25 of 26

Thread: Opteron 144 @ 3.310ghz *UPDATE 2!* *1m 25 sec* AIR COOLED!

  1. #1
    Xtreme Member
    Join Date
    May 2004
    Location
    Finland
    Posts
    270

    Oppy144@3.330ghz update 3 *water run*

    Hello

    System
    Ocz 430w power
    DFI NF4 Ultra-d
    Opteron 144 0614 KAB1E EPCW
    Khx 3500 2x256mb
    40gb maxtor
    7600gt

    Cooled by Zalman 9500 led + Zalman tzg silver
    Ambient air temp is +9C' outside

    Vcore 1.525v+110%
    Vmem 3.8v
    Mems 200/150 divider

    First i have to say superpi times are very slow, and i dont have no idea why!

    MEM SETTINGS





    UPDATE 2 !!

    Superpi 1m



    Superpi 8m





    I did remove my pc to out and ambient temperature was +9C' same settings!





    UPDATE3! water bench!

    ok im having some problems, mystic boot problems bsod sometimes and no matter if i raise vcore up to 1.8
    water were +6c' and idle&load dropped 4 c* also times were slowening :
    so here they are

    SP1M (vcore around 1.8v)






    SP8M (vcore around 1.73v)



    and my mems are not holding back






    So in the end i have 4 possible problems: Power maybe its running out of juice
    OS it's probably messed up, Mobo maxed out ?! and last maybe water wasnt cool enought...

    we will see it later
    Last edited by KeZzZu; 04-05-2007 at 03:57 AM.
    A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
    9600 Pro LE with vgpu mod
    Good Job!

  2. #2
    Xtreme Enthusiast
    Join Date
    Jun 2006
    Posts
    835
    go 25s

  3. #3
    Xtreme Addict
    Join Date
    Apr 2006
    Location
    Cairo
    Posts
    2,366
    26 seconds on air with no tweaking at all that is a good time
    May be it is the language lol
    ________
    volcano review
    Last edited by kemo; 01-31-2011 at 11:00 AM.

  4. #4
    Xtreme Member
    Join Date
    Jul 2005
    Location
    Netherlands
    Posts
    230
    Maybe he thinks with al the conroe power 26seconds is slow xD
    Asus P5B-deluxe | E4300@3200mhz | 2x1024MB 400Mhz 4-4-4-12| Asus X1950Pro |

  5. #5
    Xtreme Addict
    Join Date
    Apr 2006
    Location
    Cairo
    Posts
    2,366
    Quote Originally Posted by Razor_Sniper
    Maybe he thinks with al the conroe power 26seconds is slow xD
    He is a member since may 2004 so he should know that AMD max was 21 seconds @ 4ghz
    ________
    Chang'an Ford Engine
    Last edited by kemo; 01-31-2011 at 11:01 AM.

  6. #6
    Xtreme Member
    Join Date
    May 2004
    Location
    Finland
    Posts
    270
    Quote Originally Posted by kemo6600
    26 seconds on air with no tweaking at all that is a good time
    May be it is the language lol
    thanx


    UPDATE 2 edited
    Last edited by KeZzZu; 10-13-2006 at 02:35 AM.
    A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
    9600 Pro LE with vgpu mod
    Good Job!

  7. #7
    Xtreme Member
    Join Date
    Jun 2004
    Posts
    115
    And my watercooled Opteron 146 CABYE won't top 2.75 ghz stable 24/7 at 1.55 volts...

    Nice work.
    MSI K8N Neo2 Platinum Edition, AMD Opteron 146 CABYE 0536GPMW - 2.815 ghz @ 1.65 Vcore (32C idle, 42 Load), 2 x 512 MB TwinMOS SP, BFG Geforce 6800 GT
    Completly custom external watercooling enclosure
    Sony Vaio FS760/W laptop - 1.86 ghz Pentium M, 1GB DDR2, 6400 Go with 128 MB

  8. #8
    Xtreme Addict
    Join Date
    Oct 2005
    Posts
    1,933
    That is crazy impressive, great work man!

  9. #9
    Xtreme Member
    Join Date
    May 2004
    Location
    Finland
    Posts
    270
    thanx , tomorrow some chilled water...
    A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
    9600 Pro LE with vgpu mod
    Good Job!

  10. #10
    Xtreme Member
    Join Date
    Jun 2006
    Location
    México
    Posts
    458
    Ok, youve got a good stepping right there.

    So, just Air cooling right? Very impressive. I can do that with my Opoteron 146 CABYE 0540 but using Water cooling (as long as processor doesnt go above 35ºC and using 1.5v or 1.525 v)

    Congratulations.

  11. #11
    Xtreme Enthusiast Celcius's Avatar
    Join Date
    Dec 2004
    Location
    Texas
    Posts
    618
    Nice, keep pushing it!

  12. #12
    Xtreme Mentor
    Join Date
    Feb 2004
    Location
    The Netherlands
    Posts
    2,984
    I'm convinced that a better aircooler could get you some extra megahurtz !! amazing chip dude

    Ryzen 9 3900X w/ NH-U14s on MSI X570 Unify
    32 GB Patriot Viper Steel 3733 CL14 (1.51v)
    RX 5700 XT w/ 2x 120mm fan mod (2 GHz)
    Tons of NVMe & SATA SSDs
    LG 27GL850 + Asus MG279Q
    Meshify C white

  13. #13
    Xtreme Member
    Join Date
    May 2005
    Location
    Oslo, Norway
    Posts
    436
    Nice clock dude, but hey, you playing Age Of Empires 2? Haha, nice SPI version btw, do you have a link to it? I want it.

  14. #14
    Xtreme Enthusiast
    Join Date
    Apr 2004
    Location
    Helsinki / Finland
    Posts
    965
    My old golden Opt 146 CABYE 0540FPBW did nice SuperPI times with TT BigTyphoon

    SP1M 24.953s
    SP8M 4m32s
    SP32M 22m06s

    Too sad I hade only 2x256mb BH-5

    KeZzZu, use some Finnish cold air, here is now only 7'C
    - Team Skootterit
    - SuperPi32M : 18m53.156s with FX-57 / LN2 (Ilkkahy's brazed container)
    - SuperPi8M : 3m55.703s with FX-57 / LN2 (Ilkkahy's brazed container)
    - SuperPi1M : 21.484s with FX-57 / LN2 (Ilkkahy's brazed container)


  15. #15
    Xtreme Member
    Join Date
    Jun 2006
    Posts
    113
    any closer...and you are there.

  16. #16
    Xtreme Member
    Join Date
    May 2004
    Location
    Finland
    Posts
    270
    i did put my pc to outside and oc results are better
    A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
    9600 Pro LE with vgpu mod
    Good Job!

  17. #17
    Xtreme Member
    Join Date
    May 2005
    Location
    Paris (France)
    Posts
    283
    Kezzzu: i think you can improve your spi time with some tweaks.

    however, week 0614 for opty are the best ever for air/water.

    here is my last 0614DPCW with normal air (~40°C idle)


  18. #18
    Xtreme Member
    Join Date
    May 2004
    Location
    Finland
    Posts
    270
    yes i know that i can tweak little bit tighter mems
    but i have some issues with cpu-z 1.36 , it will keep cpu under 100% load all the time , so icant open another cpu-z to show mem speed
    A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
    9600 Pro LE with vgpu mod
    Good Job!

  19. #19
    Xtreme Member
    Join Date
    May 2004
    Location
    Finland
    Posts
    270
    heh it has been while for OC so maybe at whis weekend ill play with water depends on outside temperature becose my chiller is broken atm
    A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
    9600 Pro LE with vgpu mod
    Good Job!

  20. #20
    Xtreme Member
    Join Date
    Oct 2006
    Location
    Argentina
    Posts
    108
    nice Chip there you have. I think that the KAB1E and KABYE are he bests overclockers ( FX Step )

  21. #21
    939
    Join Date
    May 2006
    Location
    Safe Switzerland
    Posts
    899
    i love all 0614chips... my best no opti, but 0614

  22. #22
    Xtreme Member
    Join Date
    May 2004
    Location
    Finland
    Posts
    270
    UPDATE

    ok same setup but bumbed voltages and got 7 mhz more for cpu but i didnt take screenie and still on air temp were around + 6c'

    So im against wall with air so i did do little research and found that my mem has still plenty of room in OC enjoy hopig that my mobo isnt limiting, quessing that zalman cant keep temps enought low to get better run. Next time with water


    A64 2800@ 9x279 # Abit kv8pro 3rd EYE (vtt and vmem modded) # 2x256 mb TwinMos memory( with old winbond ch-5 max:240@3.5v) # 2x256mb KHX 3000 memory (with old winbond bh-5 max:270@3.7v)
    9600 Pro LE with vgpu mod
    Good Job!

  23. #23
    Xtreme Member
    Join Date
    May 2005
    Posts
    103
    WoW, maybe I shouldn't have sold my opty 144 for 60 bucks shipped... lol

    A+ Black Pearl
    GIGABYTE GA-EX58-UD5
    Intel i7 920 @ 4.1ghz | Apogee GTZ | Swiftech MCR320 | Liang D5 Vario |
    6gb Corsair XMS 1600
    Visiontek HD 4870
    3x 640gb AAKS Raid-0 Short-stroked 300gb
    Corsair TX750
    Olevia 42" 242TFHD 1080p

  24. #24
    Xtreme X.I.P.
    Join Date
    Nov 2002
    Location
    Shipai
    Posts
    31,147
    ahhhh man... those pics are in awfull quality, my eyes hurt :P
    and most dont seem to load actually... maybe rehost them?

  25. #25
    Xtreme Member
    Join Date
    Jun 2006
    Location
    Russia
    Posts
    133
    Nice clock for air

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •