Supertalent-Superclock

[andL64]

here latest tests with supertalent DDR800 Cl4 (2x1024mb)

520(1040)-4-4-3-4


528(1056)-4-4-3-4


560(1080)-4-4-4-12


everest-560(1080)-4-4-4-12


1M-1120-4-4-4-12

[andL64]

highest everst shot:

2,68V - 2,76V max.

[Exedy]

nice results man

[Deathspawner]

Nice results

Is 560 4-4-4 3D stable at all?

[andL64]

didnt try till now, i ll check 4 sure.

also i want to check how tight and how high i can go, eg with CL.3

[andL64]

now we can test seriously

[andL64]

here we go:

[sdkevin]

do you have the one with GKX chips or GCT chips?

[andL64]

do you have the one with GKX chips or GCT chips?

the HS is silver so i guess

SUPER TALENT DDR2 1024/2X1024 - 6400 800@4-4-3-8???V D9DQT - Micron BT-3 chips HS=Silver ---> D9GKX

heres direct link:
http://www.supertalent.com/products/...?PN=T800UX2GC4

but who cares?

[andL64]

Nice results

Is 560 4-4-4 3D stable at all?

lol, sry forgot also this time.

i ll test tomorrow *promised* but i think i can get through

[day187]

yeah very good sticks i have them also, they work well on low volts to still testing myself check sig

[sdkevin]

very nice results! do they perform better than G.Skill HZ?

[LordofDoom]

I'd bet not.

[nooh]

Yippppppppeeeeeeeeeeeeeeeeeeeeeeee , I have the same ones

[nooh]

Also can you run them at day in day out , all day type of thing at 1200mhz?

[MusicIsMyLife]

yeah very good sticks i have them also, they work well on low volts to still testing myself check sig

What voltage do you need for 500 4-4-3-8 and 5-5-5-15?

I also have these sticks but I´m currently limited by my mainboard.

[berk]

Great results!!!..i wanna know the voltage too

[day187]

Nice results

Is 560 4-4-4 3D stable at all?

What voltage do you need for 500 4-4-3-8 and 5-5-5-15?

I also have these sticks but I´m currently limited by my mainboard.

Great results!!!..i wanna know the voltage too

I did not do any prime testing @ 560mhz but if was superPI stable

Voltage for 500mhz 4-4-3-8 is 2.25v 24/7

5-5-5-15@2.35v .

they seem to work for me at low voltage never given then more than 2.45v ever and thats for testing.

[nooh]

3.0 volts? DDr2's , man that is mad , running them over 2.4volts

[day187]

3.0 volts? DDr2's , man that is mad , running them over 2.4volts

Sorry mate my bad type error i dont even have 3.0v on my motherboard 2.45v max

must remember to wake up before i post :P

[camouflage]

3.0 volts? DDr2's , man that is mad , running them over 2.4volts

Are You sure?

[andL64]

Are You sure?

lets start prime

yes up to 3,0V isnt a problem this ram is stable @ 2,95V so i ve to find out how high they let me go without getting errors

do you get some nice numbers with 3,15V? wanna share?

[camouflage]

Not my pic - You'll find it if You are clever........

[gregorisvas]

Can anyone tell me why my ram (supertalent pc8500 1066mhz) wont do 1000mhz+ on my gigabyte g1975x?? :S Even if i set 1000mhz/5-5-5-15 with 2,4 vdimm the system wont start..Any ideas?:S

[MusicIsMyLife]

I did not do any prime testing @ 560mhz but if was superPI stable

Voltage for 500mhz 4-4-3-8 is 2.25v 24/7

5-5-5-15@2.35v .

they seem to work for me at low voltage never given then more than 2.45v ever and thats for testing.

Thx 4 ur answer.

But is this right? 500 4-4-3-8 with 2.25 and 500 5-5-5-15 with 2.35? Typo? Or did I miss something?