sealed box insulation dry-ice run

[s e t h]

Conroe – E6600 2.4ghz
Asus P5B Deluxe Wi-fi
2 x 1Gb TeamXtreem ddr2 800
1 x 7900GT 512mb @ 700/800 – 1.55v (just in case)
36Gb WD Raptor
Aopen 700w
30kg DryIce









base and air temps
(air usually at -14' due to fan blowing over a tray of dry-ice inside the box)
cpu reported -58 in the bios and motherboard -10



3 hours later
notice 0 condensation on the board
not even under the block around the cpu



some results

[G H Z]

Thats a good idea, mix of V-Teks DI air box with CPU tube and no insulation

[Dumo]

Nice run there Flytek

Just make sure no liquid touch the bare board

[blind_ripper]

euhu very good thinking there .
great work and nice benches

[Trouffman]

nice work flytek

Have some pics about your DI Block ?

Do you use alcohol with DI Pellets ?

thanks!

[knob]

are u sponsered by isogenix?

[s e t h]

Trouffman - soz no designs for the block but the square base is hollow to the same diameter as the pipe and to about 15mm away from the cpu core.
and yes we just used two capfulls of acetone with the pellets.

knob - no we're not sponsered but they will enjoy that picture i'm sure

[Trouffman]

Ok thanks for those info