E6400 stock, 28 second HOW?

[Dennol]

my system:
E6400 stock.
DFI Infinity 975X
X1800GTO.
1 Giga Twinmos 667MHZ .

I work with 1 stick of giga.

I tried anything to make it lower to normal, but nothing.
Can it be becuase i work with 1 stick?
if I will add another one ,it will be lower?

Thanks.

[ocZZZ]

how about you just overclock it to 3.2ghz and have it at 16 seconds?

[perkam]

You run the ram at DDR2-667 5-5-5-15 and you STILL have to ask about the low superpi ?

>.<

Perkam

[Dennol]

I thought the clocks doesnt matter in conroe systems..
Am I worng?:S

[K.I.T.T.]

FYI, my E6300 at stock does 28.xxx with RAM @ 888 Mhz 4-4-4-9. Tighten those timings.

[perkam]

2 x 1 GB Team Xtreem PC2 5300 @ DDR1000 4-4-4-8

True...though KITT, the difference being you have D9s...he doesn't :p

At the very least hough...DDR2667 should be running at cas 4 IMO.

Perkam

[K.I.T.T.]

True...though KITT, the difference being you have D9s...he doesn't :p

At the very least hough...DDR2667 should be running at cas 4 IMO.

Perkam

I'm just saying that timings will make quite a bit of a difference I gained around 2 secs from changing to 4-4-4-8 from defaults of 5-6-6-18 as set by the mobo

[Falkentyne]

I thought the clocks doesnt matter in conroe systems..
Am I worng?:S

Clocks *DO* matter.
ESPECIALLY in Conroe systems, which are at LEAST twice as fast as a P4 clock for clock.

You might be thinking of RAM clocks (timings); they aren't AS important as they were before, but they still make a difference.

[Net_Devil]

I bet it`s because of the memory used in single channel.

[Kango]

I bet it`s because of the memory used in single channel.

Yes!

[lawrywild]

lol ddr2-667 cas 5 and single channel and you have to ask? rofl