Asus P5B Dlx + E6300 air cooled =100% OC easy

[Rol-Co]

i try it with all voltages on max (real vdimm 2.4v / mch 1.7v!).

til here for now


only thing is .......can't use pci-e above 480fsb.......is that right pedro?
i see in the picture a pci-e graka

edit: bios 0507 solved this problem

[Chri$ch]

ok, i think its my GBHZ Kit! I try it with divider (4:5) and they do max. 490Mhz on P5B Dlx!

On DS3 they do with 2.15v 520Mhz!

[Pedro Rocha]

Can you post your settings??? Vcore, Vmch,Vdimm etc.

Thanks

Here they are :

[Extera]

Rol-co, just 300 Mhz away from an other 100% OC

[Rol-Co]

Thanks pedro, for helping here

notish when you push up the sb voltage it can get higher in fsb, strange becouse everything is disabled here , you got the same?

mij ram is holding me i think , need some others too try, , the 6300 chip is outstanding on this board , a 100% must be easy indeed

0507 solved the pci-e problem, 0505 it goes blank above 480

[SIOUX]

I´m at 530 benchstable, but performance drops a lot after 480 for some reason, and windows reads my clocks wrong like 425mhz after i pass the 480fsb.

spi is ok, but 3dmark is a lot slower, and expecialy bandwith get buged to like 360mb/s from 75xxmb/s in sandra and everest

[[LCN]Knowledge]

Nice OC there Pedro, 100%. This is like getting 2 Allendales for the price of one lol.

[perkam]

lol...The Tuniq imo doesn't belong in air cooling...anything larger than a video card (in both width and height ) should be called "cold" air cooling :p

Perkam

[[LCN]Knowledge]

lol...The Tuniq imo doesn't belong in air cooling...anything larger than a video card (in both width and height ) should be called "cold" air cooling :p

Perkam

lol, i was wondering if that tower could fit inside a case, let say ThermalTake Soprano?.. it looks big, i mean big. but i'll keep my Golden Orb for now.

[richnewman]

lol...The Tuniq imo doesn't belong in air cooling...anything larger than a video card (in both width and height ) should be called "cold" air cooling :p

Perkam

Has anybody compared it to Scythe Infinity? I'd like the Tuniq just because everybody uses/wants it, but I swear the Infinity would be better :P Plus I hate that the fan is right in the middle.. But hey, if I can't get the Tuniq, I'll get the Infinity.

[sladesurfer]

Here they are :

Thanks, I will be getting the same board

[fritzman]

Thanks Pedro Rocha... Legendary overclock man.

The screenies are really helpful. Hope to be ab le to transpose some of the settings to my P5W-DH board.

[MaSell]

Hey Pedro.... its only 98% OC

[dinos22]

Hey Pedro.... its only 98% OC

lol

[ent]

Hey Pedro.... its only 98% OC

"Micron D9 @ 1000MHz CL4-4-4-8 " in your sig are only 980MHz

Great clocks with air Pedro!

[dinos22]

"Micron D9 @ 1000MHz CL4-4-4-8 " in your sig are only 980MHz

Great clocks with air Pedro!

[AnacondAX]

I would like to thank Mr. Pedro Rocha for this post.

It really helped me with my Oc'ing, I was unable to hit the 100% OC but 95% I think is good for someone new

Setup
- ASUS P5B Deluxe WIFI-AP Edition no mods
- E6300 retail
- Custom Cooling
- Kingston HyperX KHX6400D2K2
- Truepower 480W

Used the same volts but was unstable clocked down just 9Mhz = Stable

http://valid.x86-secret.com/show_oc?id=130025

Thanks again Pedro!!

[Revv23]

mine wouldnt pass 520fsb

I was so close, the chip wouldnt take any more FSB though... didnt matter what multi.

Nice clocks.