P5W-DH Limit FSB test(NB Water Cooling)

[OC_Windforce]

Test System

M'd : ASUS P5W-DH (Vcore,Vdimm,VNB,Vfsb MOD)
Bios : 0903
CPU : Retail E6600
RAM : F2-6400PHU2-2GBHZ (Micron D9GMH)
VGA : 7900GT (GPU,GRAM MOD)
Duel PSU : [Main]Antec NEO 480W(3.3V Rail MOD) / [Sub] Antec True 550W
CPU Cooler : NINJA
RAM Cooler : Delta FAN 70mm 25T * 2EA 3000rpm
HDD : Samsung 250G * 2EA (RAID0)
O/S : 2003
NB Cooling : ZALMAN ZM-NWB1 Water Jaket (temperature 24℃)
With Hope Freezer(MOD)



'Max FSB' is SuperPI 1M run-complete limit

NB Cooling : Air
Vmch : Max FSB
1.95V : 466
2.12V : 477

NB Cooling : Water
1.95V : 480
2.12V : 498










NB Cooling : Air


NB Cooling : Water (temperature 24℃)

NB Cooling : Water (temperature 24℃)

[mion]

For the air northbridge cooler did you use stock cooler that comes with mobo.

[OC_Windforce]

For the air northbridge cooler did you use stock cooler that comes with mobo.

stock cooler on the 60mm FAN

[eva2000]

nice water cooling MCH/NB helps http://www.xtremesystems.org/forums/...d.php?t=110938 just don't have the mch volts to get that high heh

Hope Freezer Mod.. what did you do ?

High high can you clock the fsb with tRD = 6 and 7 settings and say 2.3v vdimm ?

[OC_Windforce]

nice water cooling MCH/NB helps http://www.xtremesystems.org/forums/...d.php?t=110938 just don't have the mch volts to get that high heh

Hope Freezer Mod.. what did you do ?

High high can you clock the fsb with tRD = 6 and 7 settings and say 2.3v vdimm ?

-> NB Water Cooling
-> About 460FSB

[eva2000]

thanks.. tRD = 6 with 9x460fsb sounds better heh

[catscit]

My p5w dh has hooks around the northbridge cooler?
How did you fix that?

[OC_Windforce]

My p5w dh has hooks around the northbridge cooler?
How did you fix that?

NB cooler install ->
http://www.zalman.co.kr/usa/product/...x=171&code=021

[linflas]

My p5w dh has hooks around the northbridge cooler?
How did you fix that?

I have the Asus p5wdg2 ws pro board, I used this zalman block as I had it laying around on the pcie chip, just took the hook clip off the heatsink asus had on their and just manhandled it onto the clip brackets over the block, as I lost the hooks for it.

Will have pics early next week, as my e6600 retail arrives today, but I work 12.5 hour shifts, and work all weekend, so no time yet to get it all together, just have to wait.

Watered the whole thing but the southbridge, did not have a third block for it, so just put a 40mm fan on the top of the heatsink.

[nicepun]

I see your multi for your e6600 is set at 7, how in the check did you do that on the P5W DH mobo? I mean, by the cpuz screenshot your chip is not an ES version. thanks.

[OBR]

I see your multi for your e6600 is set at 7, how in the check did you do that on the P5W DH mobo? I mean, by the cpuz screenshot your chip is not an ES version. thanks.

Crystal CPUID 5.x.x.x man ...

[OC_Windforce]

I see your multi for your e6600 is set at 7, how in the check did you do that on the P5W DH mobo? I mean, by the cpuz screenshot your chip is not an ES version. thanks.

My cpu retail

multi set CrystalCPUID

CrystalCPUID -> Funtion -> Intel Enhanced Speedstep
<img src="http://i.blog.empas.com/freeman2580/25770536_1000x800.jpg">

[mitftw]

How did you tie down those 2 fans over the RAM? Where did you put the zip-ties and is that all you used? Thanks.

[Ehwaz001]

How did you tie down those 2 fans over the RAM? Where did you put the zip-ties and is that all you used? Thanks.

Those zip ties just connect fans and fan cables together, look closely at the pics.

[OC_Windforce]

other P5W-DH
VMCH:1.95V / MCH TMP:24C / FSB:493
<img src="http://i.blog.empas.com/freeman2580/25782968_900x1200.jpg">

[importpsycho]

how do you mount the block?
there are not holes



*edit*
oh nvm, some kind of special clips

[Dumo]

Nice WB OCWF . I guess its compatible with 965X push pins mounting.

Danger Den block only mount on 975X with 2 0r 4 hooks...