Another Kentsfield WR so close to 5GHz.. + 3d @4,75GHz

**Stoolman** · 08-15-2006, 01:59 AM

Well I'm letting my Kentsfield go, due to the expenses of my hobby... So, before i let it out of my hands.. I had to have another go at it...
Using my new Asus P5W DLX LN2 and a 7950 GFX.
Setup:
Kentsfield E6700 2,67GHz Quad
Asus P5W DH bios 801
G.Skill 8000GBHZ@ 3-3-3-4-2-A-D
OCZ Powerstream 600W sli
Club 3D Geforce 7950GX2@air with no mods
Mousepot copper
LN2

Here are pictures of the setup of the setup

I believed i messed up when I kinda lost focus on how much LN2 i poured in the container... But guess what... This board does 3D and more on a stunning -180 degrees C!!!! Scores are not that great due to low bus speed..

And then i started crancking it up...

And here is the new WR on Kentsfield E6700...http://valid.x86-secret.com/show_oc?id=112167 I tried like ten times to get a valitation above 5GHz, and at 5,011GHz it did not reboot before i was about to save the link... but unfourtunately it was a nogo...
but.. this is allright too i guess..

Now.. on to conroe...@ -180 hopefully...

Thanks to all that have supplied me with timings and tips on this setup... there are many...

**lawrywild** · 08-15-2006, 02:14 AM

O.o

awesome clocks on that kentsfield, nice one! :thumbsup:

**kiwi** · 08-15-2006, 02:15 AM

Nice benches

Do they have problems with higher fsb?

**day187** · 08-15-2006, 02:17 AM

nice congrats

**massman** · 08-15-2006, 02:18 AM

great work !

**cpulloverclock** · 08-15-2006, 02:20 AM

Very nice Kentsfield Stoolman

Cheers

For 3dm06, your cpu score is weird or normal, I dont know

look at this at 4.1G, just 6k

http://www.tyrou.net/screens/12856-3d06.png

**SoF** · 08-15-2006, 02:21 AM

that's awesome oc even the 5 GHZ would have been sooo nice.
Any screenshot of the 5GHZ without valid? would be nice as well - I just wanna see 5 gig on a quad core

that would make 20 gig of crunching power in one system - simply insane

nice benches as well

**Stoolman** · 08-15-2006, 02:42 AM

Originally Posted by cpulloverclock

Very nice Kentsfield Stoolman

Cheers

For 3dm06, your cpu score is weird or normal, I dont know

look at this at 4.1G, just 6k

http://www.tyrou.net/screens/12856-3d06.png

Yup..I know...But i think tyrou had a crossfire setup.. I was using a 7950 on air.. unmodded..
But I do agree...
Will look into this..

**Stoolman** · 08-15-2006, 02:55 AM

Uuupps.. double post..

**Tyrou** · 08-15-2006, 03:11 AM

Congratulations Stoolman !

I also find your scores weird, both Cinebench and 3DMark (cpu score) are lower than expected (compare with coolaler's or mine).
I also got a P5WDH a few days ago, and I have the same problem: super high overclocking, but crappy benching power (I'm 200MHz higher than on my bad axe), I was thinking I missed somthing, but after seeing your scores, I think that the P5WDH is really slower than the BadAxe (clock for clock).

Gimme a few days, I'm coming after you

on a UNMODDED (actual vcore = 1.63v) P5WDH, with my cascade :

**Stoolman** · 08-15-2006, 03:21 AM

Originally Posted by Tyrou

Congratulations Stoolman !

I also find your scores weird, both Cinebench and 3DMark (cpu score) are lower than expected (compare with coolaler's or mine).
I also got a P5WDH a few days ago, and I have the same problem: super high overclocking, but crappy benching power (I'm 200MHz higher than on my bad axe), I was thinking I missed somthing, but after seeing your scores, I think that the P5WDH is really slower than the BadAxe (clock for clock).

Gimme a few days, I'm coming after you

on a UNMODDED (actual vcore = 1.63v) P5WDH, with my cascade :

Go man... go... Thats it for me with the Kentsfield... it is changing hands.. I just cannot afford to keep it..Just to expensive.. Need to get myself another X6800 for some serious benching..Have a Crossfire master coming later on this week, so I guess it,s time for some 3D..

**OMEGA3** · 08-15-2006, 04:33 AM

Hi Stoolman

Nice work with Kentsfield.

I am looking forward to the score rise.

**Kjaks** · 08-15-2006, 05:13 AM

Great efforts Stoolman! Weird thing your scores in 3DM 06 and Cinebench seem low despite the clock speed. Is there any way to disable throttling on your MB? It may be part of the reason to the scores, but that's only my guess.

@Tyrou: did you disable throttling when benching?

**jozzy** · 08-15-2006, 05:30 AM

what fps did you get in all CPU test @ 3dm06 ? congratss

**sierra_bound** · 08-15-2006, 09:24 AM

Nice clocks on Kentsfield.

Cinebench score should be much higher. I noticed kaz-n had a low score on another rendering bench. He was also using a P5W DH.

**VictorWang** · 08-15-2006, 09:25 AM

hohoho~~~sturla always giving us awsome LN2 results.
great job !

**Stoolman** · 08-16-2006, 03:47 AM

It's the motherboard.. without a doubt...
I was hoping for a clockgen or a version for setfsb that would support P5B Dlx, but it seems to take a while...

The way I see it, the extremely low temp is what allowed me to go this high. It the temp decreased to -150@4,8 the system would just shut down.
The scores are relatively poor, the platform considered. I also did optimizations towards 3d mark 06, ram tweaks, real time and relatively nice clocks on the 7950, air considered, but the cpu acts more like a slow x6800 than a potent quad core...

I hope p5B will be better.. or the WS board (getting one very shortly).
So to conclude: I am very satisfied with the clocks and extremely thrilled about a motherboard that lets me bench @-180 degrees C, but real dissatisfied about the scores and the P5W DH compability with Kentsfield.

**Tyrou** · 08-16-2006, 03:52 AM

I agree with you, I hope my P5B will be better than the WDH about the Kentsfield support, even if it's better than the BadAxe for overclocking, scores are poor, and max fsb remains under 333MHz on my rig

I vmodded mine, but it seems the motherboard died yesterday when I was pushing hard the clocks

some results though :

http://valid.x86-secret.com/show_oc?id=112327

**404Power** · 08-16-2006, 04:08 AM

Wow

These are RLY insane clocks!

Keep it up!

SRY to aks again but .. WTF .. where do all of you get your Kentsfields?
Directly from Intel? o.O Plz tell!

(and btw: SRY for this n00bish question!

)

**milkcafe** · 08-16-2006, 04:24 AM

【CPU】 XEON 5160 "Woodcrest"(3.0GHz 4MB L2cache)
【3Dmark06 CPU score】 4432

【CPU】 XEON 7140M "Tulsa" @stock (3.40GHz 16MB L3cache )
【3Dmark06 CPU score】 5328

【CPU】 XEON 7140M "Tulsa" @ 4338MHz
【3Dmark06 CPU score】 6632

**milkcafe** · 08-16-2006, 04:31 AM

some other data to compare

FX62 is the weakest CPU among them

AMD Athlon(tm) FX62 @ 3640 MHz
3DMark06
CPU Score 2746 Marks
http://service.futuremark.com/compare?3dm06=315282

Intel Core Duo T2600 @ 3516 MHz
3DMark06
CPU Score 2874 Marks
http://service.futuremark.com/compare?3dm06=303322

Intel Pentium 965XE @ 6172 MHz
3DMark06
CPU Score 3314 Marks
http://service.futuremark.com/compare?3dm06=86920

AMD 2x Opteron 275 @ 2797 MHz
3DMark06
CPU Score 3824 Marks
http://service.futuremark.com/compare?3dm06=91145

AMD 2x Opteron 285 @ 3187 MHz
3DMark06
CPU Score 4052 Marks
http://service.futuremark.com/compare?3dm06=279171

Intel Conroe X6800 @ 4754MHz
3DMark06
CPU Score 4061 Marks
http://resources.vr-zone.com/Shamino/15877.jpg

Intel Conroe X6800 @ 4959MHz
3DMark06
CPU Score 4334 Marks
http://service.futuremark.com/compare?3dm06=430545

**KingThot** · 08-16-2006, 09:04 AM

Very nice. I can't wait to get a quad core.

**Grave** · 08-16-2006, 11:35 AM

Great results man.

**party animal** · 08-16-2006, 11:56 AM

stool, tyrou, those are some sick clocks. too bad you can play with that kentsfield anymore stool.

**Gebba** · 08-16-2006, 04:27 PM

very nice results.
the rigg locks very cool to

Thread: Another Kentsfield WR so close to 5GHz.. + 3d @4,75GHz

Thread Tools

Search Thread

Rate This Thread

Display

Another Kentsfield WR so close to 5GHz.. + 3d @4,75GHz

Bookmarks

Bookmarks

Posting Permissions