Post your E6400 OC Results!

[HeadShotWI]

There are similar threads. Lets get some E6400 numbers going!

Processor: E6400 @ 3.2Ghz
Motherboard: DS3
Memory: GSKILL 2 x 1 GB HZ PC6400 @ 4,4,4,12 800mhz
Cooling: Scythe Ninja/1200mm + Zalman NB Cooler/40mm
FSB: 400
Memory Mult: 1:1
vcore: 1.40625
vdimm: +.3v
pcie: normal
gmch: +.1v

Idle 44C
Dual Prime Load 58C

This is Dual Prime Stable.

[speks]

Processor: E6400 @ 3.48Ghz
Motherboard: P5W DH Deluxe
Memory: Corsair XMS DDR2 800 5-5-5-15-5
Cooling: Stock cooler + stock cooler
FSB: 435
Memory Mult: 4:3
vcore: 1.45v
vdimm: +.1v
pcie: 105
gmch: 1.65v

Idle 46C, Load 56C

[mitftw]

There is a sticky dedicated to C2D overclocking results. Why did you make this thread? Do we really need a thread for all models?

[GrossmeisterB]

I think it's easier having one thread for one CPU, as it is a lot easier for searching results of a certain CPU...

My E 6400 is at 3400MHz (8x425) so far, on my P5WDH, vMCH = 1.6Volt, vCORE = 1.43Volt (CPU-Z), all other settings on "Auto"...so, it's just the beginning, it is rock solid at that speed, I will try higher frequencies now...

[pinto]

Processor: E6400 @ 3.6Ghz
Motherboard: P5B Deluxe
Memory: Gskill PC6400HZ @ 450 4448
Cooling: Noctua NH-12
FSB: 450
Memory Mult: 1:1
vcore: 1.52v
vdimm: 2.4v
pcie: 110
gmch: stock

Idle 50C, Load 65C

[ocZZZ]

what week is your cpu pinto? where did you get it?

[[XC] hipno650]

@headshot is that the max witht he ds3 or can you take to to the speeds that the p5wdh boys are running?

[Delex]

Processor: E6400 @ 3.84Ghz
Motherboard: P5W DH
Memory: Corsair 8500 @ 430 4-4-3-8 (I'm not sure)
Cooling: Dry ice
FSB: 480
vcore: 1.52v
vdimm: 2.4v
pcie: 100
vmch: pencil mod

Chipset was under dry ice..This is a picture:


Over 3.84 GHz Win XP can't boot because the less voltage on MCH. After that I've modded with a 10 VR and I have burned the mobo

Tomorrow I'will post the cpu-z screen and more details.

BYe bye

[ocZZZ]

brrrrrrrr

[dissident]

Processor: E6400 @ 3.2Ghz (lapped IHS)
Motherboard: DS3
Memory: GSKILL 2 x 1 GB HZ PC6400 @ 4,4,4,12 800mhz
Cooling: Water
FSB: 400
Memory Mult: 1:1
vcore: 1.43675
vdimm: +.4v
pcie: normal
gmch: +.1v

Idle 30C or less depending on ambient temp
Dual Prime Load 47-49C (varies depending on ambient temp)

This is Dual Prime Stable.

Yep, I got a dud chip too, if you think 3.2 ghz is a dud. Good enough for me, for now.

[pinto]

what week is your cpu pinto? where did you get it?

it's a L624A

[ArcTan]

post the FPO/batch numbers as well

Processor: E6400 @ 3.36Ghz FPO/Batch L624A774
Motherboard: DS3
Memory: 2x512MB Corsair 5400UL 4-4-4-12 rest on auto
Cooling: XP-90C + 92mm 18db fan
FSB: 420
Memory Mult: 1:1
vcore: 1.42v load
vdimm: +.6v
pcie: normal
gmch: +.1v

http://members.optusnet.com.au/arcto...fsb-orthos.JPG

[AndreYang]

MB: P5B Deluxe
CPU: Retail Box E6400
Ram: GSKILL DDR2 1000 HZ
Cooler: Tower 120 Air cooling

500*8=4000

[CedricFP]

Are these 24/7 results??

I am thinking about an Allendale and not a Conroe.

[nutcase]

I will let you know after I finish Freezing mine

Got an Ab9 Pro and a Badaxe to play with for Mobo's.

[HeadShotWI]

Are these 24/7 results??

I am thinking about an Allendale and not a Conroe.

Mine is definately 24/7 on air first post. I could probably take it higher but I am hitting 58C on dual prime load. I am going to reapply as5 tommorrow since I think I put way too much on...

[ye_3333]

3960mhz.
ds4
crosair pc8500 2x1g
temp: -25c in bios
this board suck!! i cant use cl4 or 5 in bios!! also i do it only with one stick!!!
any help?

http://valid.x86-secret.com/show_oc?id=111188

[Jp7]

Processor: E6400 @ 3.3Ghz
Motherboard: DS4
Memory: Geil 2 x 1 GB PC6400 @ 4,4,4,12 826mhz
Cooling: Zalman 9500
FSB: 413
Memory Mult: 1:1
vcore: 1.325
vdimm: +.1v
pcie: normal
gmch: +.0v
FSB: +.0v

Idle 38C
Dual Prime Load 46C

This is Dual Prime Stable.

[dissident]

I'm starting to notice something here... all the best overclocks are being done on asus boards. I'm wondering if it's actually the chip at all, or if it's the board not wanting to go higher.

[ArcTan]

I'm starting to notice something here... all the best overclocks are being done on asus boards. I'm wondering if it's actually the chip at all, or if it's the board not wanting to go higher.

probably more chance than anything. I posted my prime stable setting

If you want 32M then this is where I'm at so far
http://members.optusnet.com.au/arcto...fsb-spi32m.JPG

[Chri$ch]

Processor: E6400 @ 3.52Ghz
Motherboard: DS3
Memory: GSKILL 2 x 1 GB HZ PC6400 @ 4-4-4-12 880mhz
Cooling: CPU / NB watercooled
FSB: 440
Memory Mult: 1:1
vcore: 1.40v
vdimm: +0.3
pcie: normal
gmch: +0.2v

[kidstechno]

Think I'm havin some trouble on mine :/

Processor: E6400 @ 3.2ghz
Motherboard: P5W DH
Memory: G.skill ZX PC6400 @ 5-6-6-18 (had to enable auto spd timings for it to boot past 357fsb, should be at 4-4-4-12 @ 800mhz)
Cooling: Zalman CNPS9500 LED
FSB: 400
Memory Mult: 1:1
vcore: 1.36
vdimm: +.05v
pcie: auto
gmch: auto
FSB: auto

Idle 50c, Orthos after 30min - 64c max or so

[HeadShotWI]

Think I'm havin some trouble on mine :/

Processor: E6400 @ 3.2ghz
Motherboard: P5W DH
Memory: G.skill ZX PC6400 @ 5-6-6-18 (had to enable auto spd timings for it to boot past 357fsb, should be at 4-4-4-12 @ 800mhz)
Cooling: Zalman CNPS9500 LED
FSB: 400
Memory Mult: 1:1
vcore: 1.36
vdimm: +.05v
pcie: auto
gmch: auto
FSB: auto

Idle 50c, Orthos after 30min - 64c max or so

Reseat your HS and apply AS5 to the NB and CPU. I did that with my scythe ninja this mroning and now I am dual prime stable for 2 hours so far and my load temp dropped from 59C to 52C.

[gundersausage]

3.4GHz but for everyday op 3.2GHz silent with Freezer 7 Pro

[kidstechno]

Reseat your HS and apply AS5 to the NB and CPU. I did that with my scythe ninja this mroning and now I am dual prime stable for 2 hours so far and my load temp dropped from 59C to 52C.

I have to remove my motherboard everytime I want to do that so it's a bit tedious. I did disable the Qfan settings and the fan is spinning @ max and knocked it down to about 62 load so not bad but still a little high for my liking. Using a Lian Li V1000 II Plus so there's no real fan blowing over the motherboard, just the CPU fan blowing air out the 120mm exhaust and I have a 120mm exhaust near the motherboard, and an intake in the front but it's in front of the hard drives.