this is my first attempt @ making a "tube".
i was just doing some testing @ work today.... and then figured WTF lets make this one real.
i have parts on order from onlinemetals, so my next one shouldn't be quite so bad, i just used the parts i had on-hand.
(Base is 9.2mm thick and the bars/plates are 1/4")
working with a TUBE should be CAKE compared to this
let the
begin
.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
Joe Camal, I give you the l337 away of the year.
:P
If you have a cooling question or concern feel free to contact me.
my theory of sticking welding rod (cut into 1/2" pieces) into a puddle of molten alu for base "pins" turned into a REAL desaster... so i did what i could
Last edited by Joe Camel; 06-10-2006 at 08:40 PM.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
the bottom might need lapped just a "few" times
yep, that is still the raw base.Originally Posted by payne280
although this is NOT the base of the above "tube", its an example of my lapping:
EDIT:
and here is the TUBE's base in its current "semi lapped" state:
Last edited by Joe Camel; 06-11-2006 at 10:28 AM.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
looking good, going for a mirror finish?
proper ghetto style camel. the best kind of mod in my mind..
done any benches on it yet?
lets see wat it does.
athlon 64 4000,2x1gb XMS 4000@250mhz-2.5,3,3,7,leadtek 7800gtx extreme @550/1.39 stock volts,hiper type R 520W,400gb HD's.
going to keep it cold for an hour to see if it holds together... so far, so GOOD!!
and here is some other testing i did since making that tube:
.
Last edited by Joe Camel; 06-14-2006 at 01:24 PM.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
Joe, you been smoking Camel Wides lately?
you KNOW it Sloppy, big ol' fatties... oops i mean WIDES
whipped up a quick load test rig:
172w (24vMax) TEC
room temp
temp hole drilled about 1/2" deep
NO load (-76c)
TEC @ 6v (-73c)
TEC @ 12v (-62c)
TEC @ 15v (-57c)
anyone need something TIGed?
.
Last edited by Joe Camel; 06-14-2006 at 07:30 PM.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
nice and ghetto Joe, should be nice for the competetion.
The Camel Pipe
*- Just SMOKE It! -*
not perfect... going to have to crush up the pellets to fit around the center post
other than that im happy
basics: 9.2mm thick base plate, 2" OD Pipe; 1/4" thick walls
base design: 1/4" OD rod 2.5" tall and dimples drilled around it leaving a little less than 1/4" material @ the center of the dimple
.
Last edited by Joe Camel; 06-19-2006 at 10:55 AM.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
CPU tube test run
O-YA!!
temp probe might be a bit off huh? (i ASS-u-MEed it was "right" out of the box)
ill calibrate in ice bath after this test
.
Last edited by Joe Camel; 06-17-2006 at 01:13 PM.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
.
not too bad for my very first V-mod and D-Ice cooled rig
(if i do say so myself)
.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
Do your aopen let to use dyce without the tcore mod ?
Strange :S
Nice 2700
I have never used a fluke probe, but it seems that you have selected "type T" for the probe, and it seems to me that you are using a normal probe type K. I dont know if I am saying something without sense, because I dont have a fluke, but if I am right, it could be because of that you are getting some strange readings...
BTW, nice tube and nice 2700 too...
.
Aopen can go below zero temps with the 1.3C BIOS
i think its @ LN2 or cascade temps where the 1.3C stops working and the T-core mod is needed.
---
ill look into the probe type, i did do an Ice-bath test and it was .4C too low
.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
.
i name her.... Stock Class
no real results tonight since she's drying out (over night) due to a minor screw-up in insulation....
guess i should have checked more careful the amount of card that plugs into the PCIE socket
warming up and drying off... once you kill the power, the whole friggn card turns to water....
V-DMM volt-mod on 2nd card:
.
Last edited by Joe Camel; 06-22-2006 at 07:41 PM.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
wen we gonna get so 01,05,06 results?
looking great camel!!
keep up the good work.
athlon 64 4000,2x1gb XMS 4000@250mhz-2.5,3,3,7,leadtek 7800gtx extreme @550/1.39 stock volts,hiper type R 520W,400gb HD's.
.
this rig is setup specifically for OCF's nVid 7600 OC contest, so im only benching '05 and only with this Forsa 7600 (stock clocked @ 400/400) ... the #'s arnt real pretty
after the contest, ill try to get some "real" #'s together (and a few new tubes for my X1900 CrossFire setup)
.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
That is looking real awesome Joe! espescially all insulated
thanks
im real happy with the results... well, except when that card above went: SNAP !! last-night
good thing i got 2x for the contest
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
looks good
.....
Posting Permissions
Reply With Quote
Bookmarks